Production
| Description | Row-Crop tractor / Built in Italy / Original price was $65,000 in 1994 |
|---|---|
| Distributor | AGCO Allis (a part of AGCO) |
| Manufacturer | SLH |
Engine
| Engine type | SLH 6.2L 6-cyl diesel |
|---|---|
| Air cleaner | dual dry element |
| Bore/Stroke | 4.13x4.72 inches (105 x 120 mm) |
| Compression | 16:1 |
| Description | SLH 1056-PS / turbocharged diesel / 6-cylinder / air-cooled |
| Displacement | 380.48 ci (6.2 L) |
| Idle RPM | 600-2354 |
| Oil capacity | 17.1 qts (16.2 L) |
| Power | 146.7 hp (109.4 kW) |
| Rated RPM | 2180 |
| Starter | electric |
| Starter power | 4.7 hp (3.5 kW) |
| Starter volts | 12 |
| PTO (claimed) | 128.4 hp (95.7 kW) |
Transmission
| Clutch | hydraulic cerametallic 350mm disc |
|---|---|
| Description | Four gears (1-4) in three ranges (L/M/H) with additional two-speed high-low shift. |
| Gears | 24 forward and 12 reverse |
| Oil capacity | 102.9 qts (97.4 L) |
| Transmission type | 24-speed synchromesh |
| Type | synchromesh |
Mechanical
| Cab | Cab standard with air-conditioning. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | mechanical front and rear |
| Drive type | Four-wheel drive |
| Final drives | inboard planetary |
Capacity
| Fuel | 55.5 gal (210.1 L) |
|---|---|
| Hydraulic system | 23.1 gal (87.4 L) |
Hydraulics
| Capacity | 23.1 gal (87.4 L) |
|---|---|
| Pressure | 2610 psi (180.0 bar) |
| Pump flow | 16.9 gpm (64.0 lpm) |
| Type | open center |
| Valves | 2 |
Hitch
| Control | lower link draft control |
|---|---|
| Rear lift (at ends) | 11905 lbs (5400 kg) |
| Rear Type | III/II |
PTO
| Clutch | hydraulic wet disc |
|---|---|
| Engine RPM | 540@2083 |
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Battery AH | 176 |
|---|---|
| Battery volts | 12 |
| Charging amps | 65 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Optional tires (ag) | Front: 14.9R30. Rear: 18.4R38 |
|---|---|
| Standard tires (ag) | Front: 16.9R30. Rear: 20.8R38 |
| Description | Flange rear axle |
| Front tread | 72 to 80 inches (182 to 203 cm) |
| Ground clearance | 20.4 inches (51 cm) |
| Height (exhaust) | 116.8 inches (296 cm) |
| Length | 185.2 inches (470 cm) |
| Max weight | 18739 lbs (8500 kg) |
| Rear tread | 65.3 to 88 inches (165 to 223 cm) |
| Shipping weight | 12566 lbs (5699 kg) |
| Wheelbase | 114.2 inches (290 cm) |
| Width | 86 inches (218 cm) |
| Front tire | 16.9R30 |
| Rear tire | 20.8R38 |
| Weight | 12566 lbs (5699 kg) |
| Wheelbase | 114.2 inches (290 cm) |
7650 Serial Numbers
| 1991 | 1001 |
|---|---|
| 1992 | 1012 |
| Description | FAQ: How to read a serial number table. |
| Location: | Serial number plate on the right side of the 7650 console. |
References
| Description | 7600 Series published by AGCO / 7600 Series published by AGCO |
|---|
Speeds
| Description | With 18.4R38 rear tires. |
|---|