Production
| Description | Row-Crop tractor / Built in Beauvais, France |
|---|---|
| Manufacturer | AGCO |
Engine
| Engine type | Cummins 8.3L 6-cyl diesel |
|---|---|
| Fuel tank | 120 gal (454.2 L) |
| Air cleaner | two paper elements |
| Bore/Stroke | 4.488x5.315 inches (114 x 135 mm) |
| Compression | 17.3:1 |
| Description | Cummins C8.3L / turbocharged aftercooled diesel / 6-cylinder / liquid-cooled |
| Displacement | 505 ci (8.3 L) |
| Power | 215 hp (160.3 kW) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Torque | 633 lb-ft (858.3 Nm) |
| Torque RPM | 1300 |
| Drawbar (tested) | 160.22 hp (119.5 kW) |
| PTO (claimed) | 180 hp (134.2 kW) |
| PTO (tested) | 184.29 hp (137.4 kW) |
Transmission
| Clutch | electro-hydraulic wet disc |
|---|---|
| Gears | 18 forward and 6 reverse |
| Transmission type | 18-speed full power shift |
| Type | full power shift |
Mechanical
| Cab | Cab standard. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Drive type | Four-wheel drive |
Hydraulics
| Pressure | 2900 psi (200.0 bar) |
|---|---|
| Pump flow | 29 gpm (109.8 lpm) |
| Type | closed center pressure flow compensated (PFC) |
| Valves | 4 |
Hitch
| Rear lift (at 24"/610mm) | 18,000 lbs (8164 kg) |
|---|---|
| Rear Type | 3/3N |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000 |
Electrical
| Battery volts | 12 |
|---|---|
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Height | 121 inches (307 cm) |
|---|---|
| Length | 203 inches (515 cm) |
| Shipping weight | 18,500 lbs (8391 kg) |
| Wheelbase | 121 inches (307 cm) |
| Width | 98.2 inches (249 cm) |
| Weight | 18,500 lbs (8391 kg) |
| Wheelbase | 121 inches (307 cm) |
AGCO DT180 attachments
| Description | front-end loader |
|---|
DT180 Serial Numbers
| 2002 | L001001 |
|---|---|
| 2003 | M001001 |
| 2004 | N001001 |
| Description | FAQ: How to read a serial number table. |
OCED Tractor Test 1782
| Description | Diesel 18-speed 4WDSeptember 12 - 26, 2000Link: OCED Tractor Test 1782 file / PTO performance / Drawbar performance / Gear 8 used for power test. / Gear 3 used for pull test. |
|---|---|
| Fuel use | 11.5 gal/hour (43.5 l/hour) / 11.9 gal/hour (45.0 l/hour) / 11.4 gal/hour (43.1 l/hour) |
| Max power | 160.22 hp (119.5 kW) |
| Max pull | 23,672 lbs (10737 kg) |
| Power at rated engine speed | 184.29 hp (137.4 kW) |
| Power at rated PTO speed | 200.01 hp (149.1 kW) |
References
| Description | RT/DT Series - Ready to Rumble published in 2001, by AGCO |
|---|