Home / AGCO / DT275B

AGCO DT275B Specs ( 2009-2010 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Beauvais, France / Original price was $231,833 in 2009 / The AGCO DT275B is the same as a Massey Ferguson 8680.
Manufacturer AGCO

Engine

Engine type AGCO SISU POWER 8.4L 6-cyl diesel
Exhaust fluid (DEF) 7.9 gal (29.9 L)
Fuel tank 155.9 gal (590.1 L)
Bore/Stroke 4.37x5.71 inches (111 x 145 mm)
Compression 16.7:1
Description AGCO SISU POWER 84CTA / turbocharged intercooled diesel / 6-cylinder / liquid-cooled / The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR.
Displacement 512.6 ci (8.4 L)
Emission control selective catalytic reduction (SCR)
Emissions Tier III
Fuel system high-pressure common rail
Maximum Power 350 hp (261.0 kW)
Power 320 hp (238.6 kW)
Pre-heating thermostart
Rated RPM 2200
Starter electric
Starter volts 12
Torque 1100 lb-ft (1491.6 Nm)
Torque RPM 1500
Drawbar (tested) 240.7 hp (179.5 kW)
PTO (claimed) 275 hp (205.1 kW)
PTO (tested) 322.6 hp (240.6 kW)

Transmission

Description continuously variable transmission
Gears infinite forward and reverse
Transmission PowerMaxx CVT
Type continuously variable transmission

Mechanical

Cab Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. ISOBUS 11783 compatible. Auto-Guide optonal.
Description Power steering / Hydraulic wet disc brakes
Differential lock full locking electro-hydraulic front and rear
Drive type Four-wheel drive
Final drives inboard planetary

Hydraulics

Pressure 2,901 psi (200.0 bar)
SCV flow 26.4 gpm (99.9 lpm)
Total flow 46.2 gpm (174.9 lpm)
Type closed center load sensing
Valves 4 to 6

Hitch

Drawbar Category 3
Front Hitch 3
Front lift (at ends) 11,020 lbs (4998 kg)
Rear lift (at 24"/610mm) 21,336 lbs (9678 kg)
Rear lift (at ends) 26,460 lbs (12002 kg)
Rear Type 3

PTO

Clutch electro-hydraulic
Engine RPM 1000@1970
Front PTO optional
Front PTO Type 1000
Rear PTO independent
Rear PTO Type 1000E/1000 (1.75)

Electrical

Battery volts 12
Charging amps 240
Charging system alternator
Ground negative

Dimensions & Tires

Optional tires (ag) Front: 420/85R30. Rear: 520/85R42
Standard tires (ag) Front: 420/85R34. Rear: 480/80R50
Bar rear axle 4.33 by 118 inches (109 by 2997 mm) / 4.33 by 105 inches (short axle) (109 by 2667 mm)
Front axle Suspension optional
Height (cab) 141 inches (358 cm)
Length 215.7 inches (547 cm)
Max weight 38,890 lbs (17640 kg)
Rear tread 58.5 to 119.5 inches (148 to 303 cm)
Shipping weight 24,250 lbs (10999 kg)
Wheelbase 122.2 inches (310 cm)
Front tire 420/85R34
Rear tire 480/80R50
Weight 24,250 lbs (10999 kg)
Wheelbase 122.2 inches (310 cm)

AGCO DT275B attachments

Description front-end loader

OCED Tractor Test 2499

Description SCR diesel CVT 4WDOctober 2008 - March 2009, Link: OCED Tractor Test 2499 file / PTO performance / Drawbar performance / Pull at 8.4 KPH / Pull at 3.7 KPH
Fuel use 15.6 gal/hour (59.0 l/hour) / 18.7 gal/hour (70.8 l/hour) / 15.7 gal/hour (59.4 l/hour) / 15.0 gal/hour (56.8 l/hour)
Max power 316.6 hp (236.1 kW) / 240.7 hp (179.5 kW)
Max pull 36,320 lbs (16474 kg)
Power at rated engine speed 281.2 hp (209.7 kW)
Power at rated PTO speed 307.0 hp (228.9 kW)

OCED Tractor Test 2559

Description EGR diesel CVT 4WDOctober 2009 - March 2010, Link: OCED Tractor Test 2559 file / PTO performance / Drawbar performance / Pull at 9.0 KPH / Pull at 4.1 KPH
Fuel use 18.0 gal/hour (68.1 l/hour) / 17.2 gal/hour (65.1 l/hour) / 17.3 gal/hour (65.5 l/hour) / 17.2 gal/hour (65.1 l/hour)
Max power 322.6 hp (240.6 kW) / 236.3 hp (176.2 kW)
Max pull 33,685 lbs (15279 kg)
Power at rated engine speed 282.7 hp (210.8 kW)
Power at rated PTO speed 305.6 hp (227.9 kW)

Tractor Tests

Description OECD 2499: SCR diesel CVT 4WD / OECD 2559: EGR diesel CVT 4WD