Allis-Chalmers 5040 Specs ( 1976-1980 )
Production
| Description | Utility tractor / Built in Brasov, Romania |
|---|---|
| Distributor | Allis Chalmers |
| Manufacturer | UTB/Universal |
| Original price | $9,823 |
Engine
| Engine type | Uzina 2.3L 3-cyl diesel |
|---|---|
| Air cleaner | dry |
| Bore/Stroke | 3.74x4.33 inches (95 x 110 mm) |
| Compression | 17:1 |
| Coolant capacity | 14 qts (13.2 L) |
| Description | Uzina / diesel / 3-cylinder / liquid-cooled |
| Displacement | 142.8 ci (2.3 L) |
| Fuel system | direct injection |
| Oil capacity | 8.3 qts (7.9 L) |
| Pre-heating | thermostart |
| Rated RPM | 2400 (early) |
| Starter volts | 12 |
| PTO (claimed) | 40 hp (29.8 kW) |
Transmission
| Clutch | 254mm dry disc / 279mm dry disc |
|---|---|
| Description | Three gears, plus reverse, in two ranges. Synchronized shifting between the top two gears (2/3 and 5/6). Used from 1976 to 1978. / Four gears, plus reverse, in two ranges. Synchronized shifting between the top two gears (3/4 and 7/8). / Adds an additional creeper range to the standard transmission. Creeper was available for either the 3-speed (early) or 4-speed (late) gearbox. On the early transmission, the third gear omitted. |
| Gears | 6 forward and 2 reverse / 8 forward and 2 reverse / 12 forward and 3 reverse |
| Oil capacity | 19 qts (18.0 L) / 19 qts (18.0 L) |
| Type | partially synchronized / partially synchronized / creeper |
| Transmission type | 6-speed partially synchronized / 8-speed partially synchronized / 12-speed creeper |
| Transmission type | 6-speed partially synchronized / 8-speed partially synchronized / 12-speed creeper |
Mechanical
| Cab | Open operator station. Optional ROPS. |
|---|---|
| Description | Power steering / Mechanical band brakes |
| Differential lock | mechanical rear |
| Drive type | Two-wheel drive |
Capacity
| Fuel | 14.25 gal (53.9 L) |
|---|---|
| Hydraulic system | 4.75 gal (18.0 L) |
Hydraulics
| Capacity | 4.75 gal (18.0 L) |
|---|---|
| Total flow | 5.75 gpm (early) (21.8 lpm) |
| Type | open center |
| Valves | 1 |
Hitch
| Control | position control and top-link draft sensing |
|---|---|
| Rear lift | 2645 lbs (1199 kg) |
| Rear Type | II/I |
PTO
| Engine RPM | 540@1970 |
|---|---|
| Rear PTO | continuous *Early, with three-speed gearbox. |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery volts | 12 |
|---|---|
| Charging amps | 30 |
| Charging system | alternator |
Dimensions & Tires
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 13.6-28 |
| Clearance (front axle) | 18.5 inches (46 cm) |
| Clearance (rear axle) | 20 inches (50 cm) |
| Front tread | 51 to 78 inches (129 to 198 cm) |
| Length | 116 inches (294 cm) |
| Rear tread | 52 to 75 inches (132 to 190 cm) |
| Shipping weight | 3850 lbs (1746 kg) |
| Wheelbase | 74.2 inches (188 cm) |
| Width | 61 inches (154 cm) |
| Front tire | 6.00-16 |
| Rear tire | 13.6-28 |
| Weight | 3850 lbs (1746 kg) |
| Wheelbase | 74.2 inches (188 cm) |
5040 Serial Number Location
| Description | Serial number plate on the right side of the 5040 transmission case, near the brake pedals. |
|---|
5040 Serial Numbers
| 1976 | 408445 |
|---|---|
| 1977 | 410364 |
| 1978 | 462148 |
| 1979 | 473000 |
| 1980 | 474000 |
| Description | FAQ: How to read a serial number table. |
Allis Chalmers 5040 Height
| Exhaust | 76.5 inches (194 cm) |
|---|---|
| Hood | 53 inches (134 cm) |
| Steering wheel | 58.6 inches (148 cm) |
Allis Chalmers 5040 attachments
| Description | front-end loader |
|---|
References
| Description | Loaders - picking up where the others leave off published in 1979, by Allis Chalmers / 5040 - 40 Tough Horses At A Very Tender Price published in 1978, by Allis Chalmers |
|---|
Speeds
| Description | With 13.6-28 rear tires. / With 13.6-28 rear tires. |
|---|
Variants
| 445 | similar Long model |
|---|---|
| 5040 | similar Allis Chalmers model |