Allis-Chalmers D12 Specs ( 1959-1968 )

Compare Tractor

Production

Description Row-Crop tractor / Built in West Allis, Wisconsin, USA
Manufacturer Allis Chalmers
Original price $3,522 (1968)

Engine

Engine type Allis-Chalmers 2.3L 4-cyl gasoline / Allis-Chalmers 2.4L 4-cyl gasoline
Fuel tank 12.5 gal (47.3 L)
Air cleaner oil bath / oil bath
Bore/Stroke 3.375x3.875 inches (86 x 98 mm) / 3.50x3.875 inches (89 x 98 mm)
Compression 7.75:1 / 7.5:1
Coolant capacity 8 qts (7.6 L)
Description Allis-Chalmers / gasoline / 4-cylinder / liquid-cooled vertical L-head / Original engine, used until 149 ci engine appeared in 1961. / Allis-Chalmers / gasoline / 4-cylinder / liquid-cooled / The larger, 149 cubic inch, engine was introduced on the D12 at serial number 3001 in 1961.
Displacement 138.7 ci (2.3 L) / 149 ci (2.4 L)
Firing order 1-2-4-3
Oil capacity 4 qts (3.8 L)
Power 31 hp (23.1 kW)
Rated RPM 1650 / 1650
Starter volts 6
Engine type Allis-Chalmers 2.3L 4-cyl gasoline / Allis-Chalmers 2.4L 4-cyl gasoline
Drawbar (claimed) 25.75 hp (19.2 kW)
Drawbar (tested) 29.43 hp (21.9 kW)
PTO (claimed) 30 hp (22.4 kW)
PTO (tested) 33.32 hp (24.8 kW)

Transmission

Gears 4 forward and 1 reverse
Transmission type 4-speed sliding gear
Type sliding gear

Mechanical

Cab Open operator station.
Drive type Two-wheel drive

Hydraulics

Type live
Valves 1 or 2

Hitch

Rear Type I
Type Snap-Couple

PTO

Rear PTO Type 540

Dimensions & Tires

Ag front 5.00x15
Ag rear 10x24 / 11x24
Ballasted weight 5,630 lbs (2553 kg)
Clearance (front axle) 20.25 inches (51 cm)
Clearance (rear axle) 22.25 inches (56 cm)
Front tread 49.3 to 80 inches (125 to 203 cm)
Height (exhaust) 76.5 inches (194 cm)
Height (hood) 52.5 inches (133 cm)
Length 121 inches (307 cm)
Rear tread 52 to 79.25 inches (132 to 201 cm)
Shipping weight 2,800 lbs (1270 kg)
Wheelbase 78.75 inches (200 cm)
Front tire 5.00x15
Rear tire 10x24
Weight 2,800 lbs (1270 kg)
Wheelbase 78.75 inches (200 cm)

Belt Pulley

RPM 1220
Speed 2556 ft/min (779.07 meters/min)

D12 Serial Number Location

Description Serial number stamped into the flange where the engine and transmission meet on the left side of the tractor.

D12 Serial Numbers

1959 1001
1960 1950
1961 2801
1962 3638
1963 5501
1964 6012
1965 9192
1966 9508
1967 9830
Description FAQ: How to read a serial number table.

Nebraska Tractor Test 723

Description 138 gasoline 4-speed 2WDOctober 13 - 20, 1959Link: Nebraska Tractor Test 723 file / PTO performance / Drawbar performance / Gear 3 used for power test. / Gear 1 used for pull test.
Fuel use 2.3 gal/hour (8.7 l/hour) / 2.2 gal/hour (8.3 l/hour)
Max power 23.56 hp (17.6 kW)
Max pull 4,041 lbs (1832 kg)
Power at rated engine speed 28.56 hp (21.3 kW)

Nebraska Tractor Test 813

Description 149 gasoline 4-speed 2WDApril 4 - 19, 1962Link: Nebraska Tractor Test 813 file / PTO performance / Drawbar performance / Gear 3 used for power test. / Gear 1 used for pull test.
Fuel use 2.7 gal/hour (10.2 l/hour) / 2.8 gal/hour (10.6 l/hour)
Max power 29.43 hp (21.9 kW)
Max pull 4,241 lbs (1923 kg)
Power at rated engine speed 33.32 hp (24.8 kW)

References

Description 50 choices that tailor tractor power to your needs published in 1960, by Allis Chalmers / D10 D12 farm tractors published in 1961, by Allis Chalmers / Series II D-10 D-12 Tractors published in 1963, by Allis Chalmers / Series III D-10 D-12 Tractors published in 1966, by Allis Chalmers / D-12 Utility Tractor published in 1960, by Allis Chalmers / more work... less sweat published in 1962, by Allis Chalmers

Speeds

Description Allis D12 with 10x24 rear tires.

Tractor Tests

Description NTTL 723: 138 gasoline 4-speed 2WD / NTTL 813: 149 gasoline 4-speed 2WD

Variants

D10 single-row tractor
D12 High Clearance cultivation tractor