Allis-Chalmers H3 Specs ( 1960-1967 )
Production
| Description | Agricultural Crawler tractor / Built in Springfield, Illinois, USA / The Allis-Chalmers H3 crawler was based on the gas-powered D15 farm tractor. |
|---|---|
| Manufacturer | Allis Chalmers |
Engine
| Engine type | Allis Chalmers 2.4L 4-cyl gasoline |
|---|---|
| Air cleaner | oil bath |
| Bore/Stroke | 3.50x3.875 inches (89 x 98 mm) |
| Compression | 7.5:1 |
| Coolant capacity | 9 qts (8.5 L) |
| Description | Allis Chalmers / gasoline / 4-cylinder / liquid-cooled |
| Displacement | 149 ci (2.4 L) |
| Fuel system | Marvel-Schebler carburetor |
| Rated RPM | 1650 |
| Starter | electric |
| Starter volts | 12 |
| Drawbar (tested) | 25.48 hp (19.0 kW) |
| PTO (tested) | 32.11 hp (23.9 kW) |
Transmission
| Clutch | wet disc (Power Director) |
|---|---|
| Description | Four gears (1-4) plus reverse (R) with two-speed high/low power shift. |
| Gears | 8 forward and 2 reverse / 4 forward and reverse |
| Transmission | Power Director |
| Type | two-speed power shift / mechanical shuttle |
| Transmission type | 8-speed two-speed power shift / 4-speed mechanical shuttle |
| Transmission type | 8-speed two-speed power shift / 4-speed mechanical shuttle |
Mechanical
| Cab | Open operator station. |
|---|---|
| Description | Mechanical contracting band brakes |
| Drive | crawler |
| Steering | mechanical clutches |
Capacity
| Fuel | 14 gal (53.0 L) |
|---|---|
| Hydraulic system | 16.5 gal (62.5 L) |
Hydraulics
| Capacity | 16.5 gal (62.5 L) |
|---|---|
| Pump flow | 15 gpm (56.8 lpm) |
| Type | open center |
| Valves | 1 to 3 |
PTO
| Rear PTO | optional |
|---|---|
| Rear PTO Type | 540 |
Dimensions & Tires
| Gauge | 48 inches (121 cm) |
|---|---|
| Height (exhaust) | 71.7 inches (182 cm) |
| Height (hood) | 48.3 inches (122 cm) |
| Length | 108.75 inches (276 cm) |
| Weight | 7395 lbs (3354 kg) |
| Wheelbase | 64 inches (162 cm) |
Allis Chalmers H3 Tracks
| Width | 7 inches (17 cm) / 10 inches (25 cm) / 12 inches (30 cm) / 14 inches (35 cm) |
|---|
Allis Chalmers H3 attachments
| Description | blade / front-end loader / backhoe |
|---|
Dimensions & Tracks
| Description | 7-inch tracks |
|---|---|
| Weight | 7395 lbs (3354 kg) |
| Wheelbase | 64 inches (162 cm) |
H3 Serial Numbers
| 1960 | 1001 |
|---|---|
| 1961 | 1250 |
| 1962 | 3199 |
| 1963 | 6001 |
| 1964 | 6945 |
| 1965 | 7890 |
| 1966 | 8856 |
| 1967 | 9483 |
| Description | FAQ: How to read a serial number table. |
Nebraska Tractor Test 793
| Description | Gasoline 8-speed crawlerMay 12 - 25, 1961Link: Nebraska Tractor Test 793 file / PTO performance / Drawbar performance / Gear 2H used for power test. / Gear 1L used for pull test. |
|---|---|
| Fuel use | 2.9 gal/hour (11.0 l/hour) / 2.9 gal/hour (11.0 l/hour) |
| Max power | 25.48 hp (19.0 kW) |
| Max pull | 7893 lbs (3580 kg) |
| Power at rated engine speed | 32.11 hp (23.9 kW) |
References
| Description | H3 / HD-3 Industrial Crawler Tractors published in 1967, by Allis Chalmers / Industrial Tractor Equipment published in 1962, by Allis Chalmers / Farm Crawlers published in 1962, by Allis Chalmers |
|---|
Variants
| H3 | gas engine |
|---|---|
| HD3 | diesel engine |