Production
| Description | Row-Crop tractor / Built in Basildon, England |
|---|---|
| Manufacturer | CaseIH |
Engine
| Engine type | CNH 7.5L 6-cyl diesel |
|---|---|
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.40x5.00 inches (112 x 127 mm) |
| Compression | 17.0:1 |
| Coolant capacity | 26.8 qts (25.4 L) |
| Description | CNH / turbocharged intercooled diesel / 6-cylinder / liquid-cooled inline |
| Displacement | 456 ci (7.5 L) |
| Fuel system | mechanical fuel injection |
| Oil capacity | 20 qts (18.9 L) |
| Power | 122 hp (91.0 kW) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Drawbar (tested) | 83.0 hp (61.9 kW) |
| PTO (claimed) | 95 hp (70.8 kW) |
| PTO (tested) | 104.9 hp (78.2 kW) |
Transmission
| Clutch | wet disc |
|---|---|
| Description | Six power shift gears (1-6) in three ranges (A-C). Power shuttle shifting. / Optional full power shift transmission with power shuttle. |
| Gears | 18 forward and 6 reverse / 18 forward and 6 reverse |
| Type | partial powershift / full power shift |
| Transmission type | 18-speed partial powershift / 18-speed full power shift |
| Transmission type | 18-speed partial powershift / 18-speed full power shift |
Mechanical
| Cab | Cab standard with air-conditioning. |
|---|---|
| Description | Power steering / Differential hydraulic wet disc brakes |
| Drive type | Two- or four-wheel drive |
Capacity
| Fuel | 75 gal (283.9 L) |
|---|---|
| Hydraulic system | 23.75 gal (89.9 L) |
Hydraulics
| Capacity | 23.75 gal (89.9 L) |
|---|---|
| Pressure | 2750 psi (189.6 bar) |
| Pump flow | 28 gpm (106.0 lpm) |
| SCV flow | 25 gpm (94.6 lpm) |
| Steering flow | 16 gpm (60.6 lpm) |
| Total flow | 44 gpm (166.5 lpm) |
| Type | closed-center load sensing |
| Valves | 2 to 5 |
Hitch
| Control | electronic lower-link sensing |
|---|---|
| Rear lift (at 24"/610mm) | 8,725 lbs (3957 kg) |
| Rear Type | II |
PTO
| Clutch | electro-hydraulic |
|---|---|
| Engine RPM | 540@1969 |
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Battery AH | 176 |
|---|---|
| Battery CCA | 1300 |
| Battery volts | 12 |
| Charging amps | 120 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| 2WD Length | 180.5 inches (458 cm) |
|---|---|
| 2WD Operating weight | 11,283 lbs (5117 kg) |
| 2WD Wheelbase | 108.1 inches (274 cm) |
| 4WD Front tread | 60 to 76 inches (152 to 193 cm) |
| 4WD Length | 185.7 inches (471 cm) |
| 4WD Operating weight | 11,859 lbs (5379 kg) |
| 4WD Wheelbase | 107.2 inches (272 cm) |
| Bar rear axle | 3.62 by 98 inches (91 by 2489 mm) |
| Description | Flange rear axle |
| Height (cab) | 111.4 inches (282 cm) |
| Rear tread | 60 to 88 inches (bar axle) (152 to 223 cm) |
| 2WD Wheelbase | 108.1 inches (274 cm) |
| 4WD Wheelbase | 107.2 inches (272 cm) |
| Weight | 11283 to 11859 pounds |
MXM120 Serial Numbers
| 2003 | ACM191688 |
|---|---|
| 2004 | ACM216992 |
| 2005 | ACM240012 |
| 2006 | ACM258550 |
| 2007 | ACM283224 |
| Description | FAQ: How to read a serial number table. |
OCED Tractor Test 2086
| Description | Diesel 18-speed 4WDDecember 1, 2002 - March 1, 2003Link: OCED Tractor Test 2086 file / PTO performance / Drawbar performance / Gear 3B used for power test. / Gear 1A used for pull test. |
|---|---|
| Fuel use | 6.4 gal/hour (24.2 l/hour) / 6.8 gal/hour (25.7 l/hour) / 6.7 gal/hour (25.4 l/hour) / 6.8 gal/hour (25.7 l/hour) |
| Max power | 104.9 hp (78.2 kW) / 83.0 hp (61.9 kW) |
| Max pull | 12,320 lbs (5588 kg) |
| Power at rated engine speed | 100.7 hp (75.1 kW) |
| Power at rated PTO speed | 104.1 hp (77.6 kW) |
References
| Description | MXM Series Maxxum Tractors published in 2004, by Case IH |
|---|