Challenger MT225B Specs ( 2005-2008 )
Production
| Description | Compact Utility tractor / Built in Matsuyama, Japan |
|---|---|
| Distributor | Challenger (a part of AGCO) |
| Manufacturer | Iseki |
Engine
| Engine type | Iseki 1.1L 3-cyl diesel |
|---|---|
| Air cleaner | dry |
| Bore/Stroke | 3.08x3.07 inches (78 x 78 mm) |
| Compression | 22.5:1 |
| Coolant capacity | 7.5 qts (7.1 L) |
| Description | Iseki E3312 / diesel / 3-cylinder / liquid-cooled |
| Displacement | 68.5 ci (1.1 L) |
| Fuel system | indirect injection |
| Idle RPM | 1250-2860 |
| Oil capacity | 2.9 qts (2.7 L) |
| Power (gross) | 22.5 hp (16.8 kW) |
| Power (net) | 22 hp (16.4 kW) |
| Pre-heating | glow plugs |
| Rated RPM | 2600 |
| Starter volts | 12 |
| Engine (gross) | 22.5 hp (16.8 kW) |
| Engine (net) | 22 hp (16.4 kW) |
| PTO (claimed) | 17.6 hp (13.1 kW) |
Transmission
| Description | hydrostatic |
|---|---|
| Gears | infinite forward and reverse (2-range) |
| Oil capacity | 14.8 qts (14.0 L) |
| Type | hydrostatic |
Mechanical
| Description | Wet disc brakes / Two-post fixed ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
| Final drives | spur gear |
| Steering | hydrostatic power |
Capacity
| Front diff. | 2.9 qts (2.7 L) |
|---|---|
| Fuel | 6.6 gal (25.0 L) |
Hydraulics
| Mid valves | 2 OptOptional |
|---|---|
| Pressure | 1990 psi (137.2 bar) |
| Pump flow | 5.5 gpm (20.8 lpm) |
| Rear valves | 2 OptOptional |
| Steering flow | 2.64 gpm (10.0 lpm) |
| Steering press. | 1493 psi (102.9 bar) |
| Total flow | 8.1 gpm (30.7 lpm) |
| Type | open center |
Hitch
| Control | position and response control |
|---|---|
| Rear Arms | fixed link ends |
| Rear lift (at 24"/610mm) | 591 lbs (268 kg) |
| Rear lift (at ends) | 1190 lbs (539 kg) |
| Rear Type | I |
PTO
| Clutch | electro-hydraulic wet disc |
|---|---|
| Mid PTO | standard |
| Mid PTO Type | 2000 (1.00) |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 435 |
|---|---|
| Battery volts | 12 |
| Charging amps | 40 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ag front | 6-12 |
|---|---|
| Ag rear | 9.5-16 |
| Industrial front | 23x8.50-12 |
| Industrial rear | 12x16.5 |
| Lawn/turf front | 23x10.50-12 |
| Lawn/turf rear | 33x12.50-16.5 |
| Flange rear axle | 33.62 inch length (853 mm) |
| Front axle | Flange: 34.58 inch length (878 mm) |
| Front tread | 35.6 inches (90 cm) |
| Ground clearance | 10.4 inches (26 cm) |
| Height (ROPS) | 77 inches (195 cm) |
| Length | 102 inches (259 cm) |
| Rear tread | 35.6 inches (90 cm) |
| Wheelbase | 59.8 inches (151 cm) |
| Width | 39.4 inches*Minimum width. (100 cm) |
| Front tire | 6-12 |
| Rear tire | 9.5-16 |
| Weight | 1609 lbs (729 kg) |
| Wheelbase | 59.8 inches (151 cm) |
Challenger MT225B Weight
| Max capacity | 3086 lbs (1399 kg) |
|---|---|
| Max front axle | 1433 lbs (650 kg) |
| Max rear axle | 1653 lbs (749 kg) |
Challenger MT225B attachments
| Description | front-end loader |
|---|
References
| Description | MT200B Series published in 2005, by AGCO |
|---|
Speeds
| Description | With 9.5-16 R1 rear tires. |
|---|
Variants
| 1523 | similar Massey Ferguson model |
|---|