TRACTORSPY
Home / Challenger / MT275B

Challenger MT275B Specs ( 2005-2008 )

Compare Tractor

Production

Description Compact Utility tractor / Built in Matsuyama, Japan
Distributor Challenger (a part of AGCO)
Manufacturer Iseki

Engine

Engine type Iseki 1.5L 3-cyl diesel
Air cleaner dual-stage dry
Bore/Stroke 3.43x3.30 inches (87 x 84 mm)
Compression 21.7:1
Coolant capacity 7.1 qts (6.7 L)
Description Iseki E3CD-VTB10 / turbocharged diesel / 3-cylinder / liquid-cooled
Displacement 91.4 ci (1.5 L)
Fuel system indirect injection
Idle RPM 980-2860
Oil capacity 5 qts (4.7 L)
Power (gross) 40.1 hp (29.9 kW)
Power (net) 38 hp (28.3 kW)
Pre-heating glow plugs
Rated RPM 2600
Starter volts 12
Engine (gross) 40.1 hp (29.9 kW)
Engine (net) 38 hp (28.3 kW)
Gear PTO (claimed) 31.550 hp (23.5 kW)
Hydro PTO (claimed) 29.5 hp (22.0 kW)

Transmission

Clutch mechanical dry disc / dry main, wet shuttle
Description Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift. / Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch.
Gears infinite forward and reverse (3-range) / 8 forward and reverse / 12 forward and reverse
Oil capacity 32.8 qts (31.0 L) / 32.8 qts (31.0 L) / 32.8 qts (31.0 L)
Transmission SynchroShuttle / PowerShuttle
Type hydrostatic / partially synchronized with power shuttle
Description hydrostatic
Transmission type 8-speed / 12-speed partially synchronized with power shuttle
Description hydrostatic
Transmission type 8-speed / 12-speed partially synchronized with power shuttle

Mechanical

Description Power steering / Wet disc brakes / Two-post foldable ROPS
Differential lock mechanical rear
Drive type Four-wheel drive
Final drives spur gear

Capacity

Fuel 10.6 gal (40.1 L)
Hydraulic system 8.2 gal (31.0 L)

Hydraulics

Capacity 8.2 gal (31.0 L)
Mid valves 2 OptOptional
Pressure 2276 psi (156.9 bar)
Pump flow 8.3 gpm (31.4 lpm)
Rear valves 2 OptOptional
Steering flow 4.4 gpm (sync shuttle) (16.7 lpm)
Steering press. 2276 psi (156.9 bar)
Total flow 12.7 gpm (sync shuttle) (48.1 lpm)
Type open center

Hitch

Control position and response control
Rear Arms fixed link ends ((sync shuttle)
Rear lift (at 24"/610mm) 2535 lbs (1149 kg)
Rear lift (at ends) 2800 lbs (1270 kg)
Rear Type I

PTO

Clutch electro-hydraulic wet disc
Mid PTO independent OptOptional
Mid PTO Type 2000 (1.00)
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery CCA 630
Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 8-16
Ag rear 12.4-24
Industrial front 10-16.5
Industrial rear 14.9-24
Lawn/turf front 27x8.50-15
Lawn/turf rear 41x14.00-20
Flange rear axle 44.6 inch length (1132 mm)
Front axle Flange: 48.8 inch length (1239 mm)
Front tread 45 inches (114 cm)
Ground clearance 14.1 inches (35 cm)
Height (ROPS) 87.4 inches (221 cm)
Length 121 inches (307 cm)
Wheelbase 69.7 inches (177 cm)
Width 62.2 inches*Minimum width (157 cm)
Front tire 8-16
Rear tire 12.4-24
Weight 3169 lbs (1437 kg)
Wheelbase 69.7 inches (177 cm)

Challenger MT275B Weight

Max capacity 6614 lbs (3000 kg)
Max front axle 3968 lbs (1799 kg)
Max rear axle 3968 lbs (1799 kg)

Challenger MT275B attachments

Description front-end loader / backhoe

References

Description MT200B Series published in 2005, by AGCO

Speeds

Description With 12.4-24 R1 rear tires. / With 12.4-24 R1 rear tires. / With 12.4-24 R1 rear tires.

Variants

1540 similar Massey Ferguson model