Home / Challenger / MT295B

Challenger MT295B Specs ( 2005-2008 )

Compare Tractor

Production

Description Compact Utility tractor / Built in Matsuyama, Japan / Original price was $25,000 in 2005
Distributor Challenger (a part of AGCO)
Manufacturer Iseki

Engine

Engine type Iseki 3.0L 4-cyl diesel
Air cleaner dual-stage dry
Bore/Stroke 3.82x3.94 inches (97 x 100 mm)
Compression 21.5:1
Coolant capacity 8 qts (7.6 L)
Description Iseki E4DD / diesel / 4-cylinder / liquid-cooled
Displacement 180.3 ci (3.0 L)
Fuel system indirect injection
Idle RPM 975-2750
Oil capacity 8.5 qts (8.0 L)
Power (gross) 52.1 hp (38.9 kW)
Power (net) 50 hp (37.3 kW)
Pre-heating glow plugs
Rated RPM 2600
Starter volts 12
Engine (gross) 52.1 hp (38.9 kW)
Engine (net) 50 hp (37.3 kW)
PTO (claimed) 41 hp (30.6 kW)

Transmission

Clutch dry / dry main, wet shuttle / mechanical wet disc
Description Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift. / Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. / Four push-button power shift gears in three non-synchronized ranges. Power shuttle shifting with left-hand console lever. Only available on the MT295B with a cab.
Gears 8 forward and reverse / 12 forward and reverse / 12 forward and reverse
Oil capacity 40.2 qts (38.0 L) / 40.2 qts (38.0 L) / 40.2 qts (38.0 L)
Transmission SynchroShuttle / PowerShuttle / AutoPower IV
Type partially synchronized / partial power shift
Transmission type 8-speed / 12-speed partially synchronized / 12-speed partial power shift
Transmission type 8-speed / 12-speed partially synchronized / 12-speed partial power shift

Mechanical

Cab Two-post foldable ROPS. Cab optional with air-conditioning.
Description Power steering / Wet disc brakes
Differential lock mechanical rear
Drive type Four-wheel drive
Final drives spur gear

Capacity

Fuel 13.2 gal (50.0 L)
Hydraulic system 10 gal (37.9 L)

Hydraulics

Capacity 10 gal (37.9 L)
Mid valves 2 OptOptional
Pressure 2276 psi (156.9 bar)
Pump flow 11.4 gpm (43.1 lpm)
Rear valves 2 OptOptional
Steering flow 4.8 gpm (sync shuttle) (18.2 lpm)
Steering press. 2276 psi (156.9 bar)
Total flow 16.2 gpm (sync shuttle) (61.3 lpm)
Type open center

Hitch

Control position and response control
Rear Arms telescopic link ends
Rear lift (at 24"/610mm) 3086 lbs (1399 kg)
Rear lift (at ends) 3483 lbs (1579 kg)
Rear Type I

PTO

Clutch electro-hydraulic wet disc
Rear PTO independent
Rear PTO Type 540

Electrical

Battery CCA 710
Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 9.5-16
Ag rear 16.9-24
Industrial front 10-16.5
Industrial rear 17.5L-24
Lawn/turf front 27x10.50-15
Lawn/turf rear 44x18.00-20
Flange rear axle 48.8 inch length (1239 mm)
Front axle Flange: 55.7 inch length (1414 mm)
Ground clearance 13.2 inches (33 cm)
Height (ROPS) 89.1 inches (226 cm)
Length 132.7 inches (337 cm)
Wheelbase 76 inches (193 cm)
Width 65.4 inches*Minimum width (166 cm)
Front tire 9.5-16
Rear tire 16.9-24
Weight 3726 lbs (1690 kg)
Wheelbase 76 inches (193 cm)

Challenger MT295B Weight

Max capacity 8378 lbs (3800 kg)
Max front axle 4630 lbs (2100 kg)
Max rear axle 4630 lbs (2100 kg)
ROPS Shipping 3726 lbs (1690 kg)

Challenger MT295B attachments

Description front-end loader / backhoe

References

Description MT200B Series published in 2005, by AGCO

Speeds

Description With 16.9x24 R1 rear tires. / With 16.9-24 R1 rear tires. / With 16.9-24 R1 rear tires.

Variants

1552 similar Massey Ferguson model