Home / Challenger / MT485D

Challenger MT485D Specs ( 2014-2016 )

Compare Tractor

Production

Description Utility tractor
Manufacturer Challenger (a part of AGCO)

Engine

Engine type AGCO Power 4.9L 4-cyl diesel
Exhaust fluid (DEF) 9.2 gal (34.8 L)
Fuel tank 64 gal (242.2 L)
Air cleaner dual dry element
Bore/Stroke 4.251x5.276 inches (108 x 134 mm)
Description AGCO Power 49AWI / turbocharged air-to-air intercooled diesel / 4-cylinder 16-valve / liquid-cooled
Displacement 299 ci (4.9 L)
Emission control selective catalytic reduction (SCR)
Emissions Interim Tier IV
Fuel system electronic high pressure common rail
Power (gross) 135 hp (AutoPower IV) (100.7 kW)
Pre-heating thermostart
Rated RPM 2200
Starter electric
Starter volts 12
Drawbar (tested) 99.0 hp (73.8 kW)
Engine (gross) 135 hp (100.7 kW)
PTO (claimed) 110 hp (AutoPower IV) (82.0 kW)
PTO (tested) 136.9 hp (102.1 kW)

Transmission

Clutch wet disc
Description Four power shift gears in four ranges. / Six power shift gears in four ranges.
Gears 16 forward and reverse / 24 forward and reverse / infinite forward and reverse
Transmission AutoPower IV / AutoPower VI / Techstar CVT
Type four speed power shift / six speed power shift / continuously variable transmission (CVT)
Description continuously variable transmission (CVT)
Transmission type 16-speed four speed power shift / 24-speed six speed power shift
Description continuously variable transmission (CVT)
Transmission type 16-speed four speed power shift / 24-speed six speed power shift

Mechanical

Cab Cab standard with air-conditioning.
Description Wet disc brakes
Drive type Four-wheel drive
Steering hydrostatic power

Hydraulics

SCV flow 15 gpm (open center) (56.8 lpm)
Type closed center load sensing (CCLS)
Valves 2 to 4

Hitch

Control electronic lower link draft sensing
Drawbar Cat. 2
Rear lift (at 24"/610mm) 11400 lbs (5171 kg)
Rear Type III/II

PTO

Rear PTO independent
Rear PTO Type 540/1000

Electrical

Batteries 2
Battery CCA 600
Battery volts 12
Charging amps 175
Charging system alternator
Ground negative

Dimensions & Tires

Bar rear axle 3.23 by 80 inches (82 by 2032 mm) / 3.23 by 105 inches (82 by 2667 mm) / 3.74 by 90 inches (94 by 2286 mm) / 3.74 by 113 inches (94 by 2870 mm)
Description Flange rear axle
Shipping weight 12500 lbs (5670 kg)
Wheelbase 105 inches (266 cm)
Weight 12500 lbs (5670 kg)
Wheelbase 105 inches (266 cm)

OCED Tractor Test 2794

Description Diesel CVT 4WDAugust 2013 - September 2013, Link: OCED Tractor Test 2794 file / PTO performance / Drawbar performance / Pull at 8.17KPH / Pull at 3.62KPH
Fuel use 7.7 gal/hour (29.1 l/hour) / 7.2 gal/hour (27.3 l/hour) / 7.6 gal/hour (28.8 l/hour) / 6.9 gal/hour (26.1 l/hour)
Max power 136.9 hp (102.1 kW) / 87.9 hp (65.5 kW)
Max pull 13850 lbs (6282 kg)
Power at rated engine speed 119.8 hp (89.3 kW)
Power at rated PTO speed 132.4 hp (98.7 kW)

OCED Tractor Test 2833

Description Diesel AutoPower IV 4WDFebruary 2014 - March 2014, Link: OCED Tractor Test 2833 file / PTO performance / Drawbar performance / Gear 3A used for power test. / Gear 1D used for pull test.
Fuel use 7.8 gal/hour (29.5 l/hour) / 7.4 gal/hour (28.0 l/hour) / 7.7 gal/hour (29.1 l/hour) / 7.2 gal/hour (27.3 l/hour)
Max power 136.5 hp (101.8 kW) / 99.0 hp (73.8 kW)
Max pull 12350 lbs (5601 kg)
Power at rated engine speed 119.4 hp (89.0 kW)
Power at rated PTO speed 133.8 hp (99.8 kW)

References

Description Challenger MT400B Series published in 2013, by AGCO / Challenger MT400B Series published in 2014, by AGCO

Tractor Tests

Description OECD 2794: diesel CVT 4WD / OECD 2833: diesel AutoPower IV 4WD

Variants

6615 similar Massey Ferguson model