Home / Challenger / MT485E

Challenger MT485E Specs ( 2017-2020 )

Compare Tractor

Production

Description Utility tractor / Built in France
Manufacturer Challenger (a part of AGCO)

Engine

Engine type AGCO Power 4.9L 4-cyl diesel
Exhaust fluid (DEF) 7.9 gal (29.9 L)
Fuel tank 67 gal (253.6 L)
Bore/Stroke 4.251x5.276 inches (108 x 134 mm)
Description AGCO Power / intercooled turbocharged diesel / 4-cylinder / liquid-cooled
Displacement 299 ci (4.9 L)
Emission control selective catalytic reduction
Emissions Tier IV
Fuel system high-pressure common rail direct injection
Maximum Power 150 hp (111.9 kW)
Power 140 hp (104.4 kW)
Rated RPM 2100
Starter electric
Starter volts 12
Torque 623 lb-ft (844.8 Nm)
Torque RPM 1600
Drawbar (tested) 124.6 hp (92.9 kW)
PTO (claimed) 130 hp (96.9 kW)
PTO (tested) 144 hp (107.4 kW)

Transmission

Clutch hydraulic wet disc / hydraulic wet disc
Gears 16 forward and reverse / 24 forward and reverse / infinite forward and reverse
Transmission AutoPower IV / AutoPower VI / TechStar CVT
Type four-speed power shift / six-speed power shift / continuously-variable transmission
Description continuously-variable transmission
Transmission type 16-speed four-speed power shift / 24-speed six-speed power shift
Description continuously-variable transmission
Transmission type 16-speed four-speed power shift / 24-speed six-speed power shift

Mechanical

Cab Cab standard with air-conditioning. Auto-Guide 3000 ((Optional))
Description Power steering / Hydraulic wet disc brakes
Differential lock electro-hydraulic front and rear
Drive type Four-wheel drive

Hydraulics

Pump flow 26 gpm (98.4 lpm)
Type open center
Valves up to 5

Hitch

Rear Arms telescopic link end
Rear lift (at 24"/610mm) 11244 lbs (5100 kg)
Rear Type III/II

PTO

Rear PTO independent
Rear PTO Type 540/1000

Electrical

Battery volts 12
Charging amps 175
Charging system alternator
Ground negative

Dimensions & Tires

Description Flange rear axle / Bar rear axle
Shipping weight 15432 lbs (6999 kg)
Wheelbase 105 inches (266 cm)
Width 72 inches*Minimum width (182 cm)
Weight 15432 lbs (6999 kg)
Wheelbase 105 inches (266 cm)

OCED Tractor Test 3031

Description Diesel AutoPower IV 4WDOctober 2016 - 2016, Link: OCED Tractor Test 3031 file / PTO performance / Drawbar performance / Gear 3A used for power test. / Gear 1B used for pull test.
Fuel use 8.6 gal/hour (32.6 l/hour) / 8.3 gal/hour (31.4 l/hour) / 8.6 gal/hour (32.6 l/hour) / 8.7 gal/hour (32.9 l/hour)
Max power 144 hp (107.4 kW) / 124.6 hp (92.9 kW)
Max pull 12950 lbs (5874 kg)
Power at rated engine speed 132.4 hp (98.7 kW)
Power at rated PTO speed 139.5 hp (104.0 kW)

References

Description MT400E Series Tractors published in 2016, by AGCO

Variants

6715S similar Massey Ferguson model