Home / Challenger / MT525B

Challenger MT525B Specs ( 2004-2011 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Beauvais, France / The Challenger 525B is similar to the Massey Ferguson 6465 and 7465.
Manufacturer Challenger (a part of AGCO)

Engine

Engine type Caterpillar 6.0L 6-cyl diesel
Air cleaner dual paper elements
Bore/Stroke 3.937x5.00 inches (100 x 127 mm)
Compression 17.5:1
Coolant capacity 29.6 qts (28.0 L)
Cooling system viscous fan
Description Caterpillar 3056C / turbocharged diesel / 6-cylinder / liquid-cooled vertical inline
Displacement 365.2 ci (6.0 L)
Emissions Tier II
Fuel system electronic direct injection
Idle RPM 800-2350
Oil capacity 15.3 qts (14.5 L)
Power 118 hp (88.0 kW)
Rated RPM 2200
Starter power 4 hp (3.0 kW)
Starter volts 12
Drawbar (tested) 81.8 hp (61.0 kW)
PTO (claimed) 95 hp (70.8 kW)
PTO (tested) 110.9 hp (82.7 kW)

Transmission

Clutch hydraulic wet disc
Description Four synchronized gears (1-4) in two synchronized ranges (low/high) with a four-speed (A-D) power shift on the left-hand power shuttle lever. / Four gears with six power shift ranges. The AutoPower VI became acailable in 2005.
Gears 32 forward and reverse / 24 forward and reverse / infinite forward and reverse (2-range)
Oil capacity 59.2 qts (56.0 L)
Transmission AutoPower IV / AutoPower VI / TechStar CVT
Type partial power shift / partial power shift / continuously variable transmission
Description continuously variable transmission
Transmission type 32-speed partial power shift / 24-speed partial power shift
Description continuously variable transmission
Transmission type 32-speed partial power shift / 24-speed partial power shift

Mechanical

Cab Cab standard with heat and A/C. Optional pneumatic cab suspension and automatic climate control.
Description Power steering / Hydraulic wet disc brakes
Differential lock electro-hydraulic front and rear
Drive type Two- or four-wheel drive
Final drives inboard planetary
Trailer brakes hydraulic OptOptional

Capacity

AutoPower Hydraulic system 18.5 gal (70.0 L)
CVT Hydraulic system 26.4 gal (99.9 L)
Fuel 71 gal (268.7 L)

Hydraulics

AutoPower Capacity 18.5 gal (70.0 L)
CVT Capacity 26.4 gal (99.9 L)
Pressure 2900 psi (200.0 bar)
Rear valves 2 to 4
Total flow 29 gpm (109.8 lpm)
Type closed center pressure flow compensating (PFC)

Hitch

AP Rear lift (at 24"/610mm) 8500 lbs (3855 kg)
CVT Rear lift (at 24"/610mm) 11200 lbs (5080 kg)
Front Hitch optional
Front lift 5,500 lbs (2494 kg)
Rear Type II/III

PTO

Engine RPM 540@1980
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2
Battery CCA 420
Battery volts 12
Charging amps 120
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 14L-16.1 (2WD)
Ag rear 18.4R38
2WD Front tread 64.1 to 83 inches (162 to 210 cm) / 73.2 to 96 inches (wide row-crop axle) (185 to 243 cm)
2WD Wheelbase 112.1 inches (284 cm)
4WD Front tread 61.7 to 80.8 inches (156 to 205 cm)
4WD Wheelbase 109.5 inches (278 cm)
Clearance (drawbar) 15.4 inches (39 cm)
Description Flange rear axle
Height (cab) 112.8 inches (286 cm)
Length 168.5 inches (427 cm)
Rear tread 54.4 to 88.1 inches (138 to 223 cm)
Width 81.1 inches (205 cm)
2WD Wheelbase 112.1 inches (284 cm)
4WD Wheelbase 109.5 inches (278 cm)
Front tire 14L-16.1
Rear tire 18.4R38
Weight 11052 to 14835 pounds

Challenger MT525B Weight

2WD Max front axle 4652 lbs (2110 kg)
2WD Shipping 11052 lbs (5013 kg)
4WD Max front axle 7054 lbs (3199 kg)
4WD Operating 12180 lbs (5524 kg)
4WD Shipping 11546 lbs (5237 kg)
CVT 4WD Operating 14835 lbs (6729 kg)
CVT 4WD Shipping 13084 lbs (5934 kg)
Max Drawbar 3821 lbs (1733 kg)
Max rear axle 12345 lbs (5599 kg)

MT525B Serial Numbers

2004 N00001
2005 P00001
2006 R00001
2007 S00001
Description FAQ: How to read a serial number table.

OCED Tractor Test 2193

Description Diesel CVT 4WDJanuary 2004 - March 2004, Link: OCED Tractor Test 2193 file / PTO performance / Drawbar performance / Pull at 6.2 KPH / Pull at 3.3 KPH
Fuel use 6.3 gal/hour (23.8 l/hour) / 6.6 gal/hour (25.0 l/hour) / 6.5 gal/hour (24.6 l/hour)
Max power 106.5 hp (79.4 kW) / 81.8 hp (61.0 kW)
Max pull 14,310 lbs (6491 kg)
Power at rated engine speed 96.7 hp (72.1 kW)
Power at rated PTO speed 102.5 hp (76.4 kW)

OCED Tractor Test 5153

Description Diesel AutoPower IV 4WDFebruary 2004 - March 2004, Link: OCED Tractor Test 5153 file / PTO performance / Drawbar performance / Gear 1LB used for power test. / Gear 1TD used for pull test.
Fuel use 6.4 gal/hour (24.2 l/hour) / 6.7 gal/hour (25.4 l/hour) / 6.7 gal/hour (25.4 l/hour) / 5.6 gal/hour (21.2 l/hour)
Max power 110.9 hp (82.7 kW) / 60.2 hp (44.9 kW)
Max pull 10,160 lbs (4608 kg)
Power at rated engine speed 96.7 hp (72.1 kW)
Power at rated PTO speed 109.2 hp (81.4 kW)

References

Description Challenger MT500B AutoPower IV Product Information Guide published in 2004, by AGCO / Challenger MT500B Series published in 2005, by AGCO / Challenger MT500B TECHstar CVT Product Information Guide published in 2004, by AGCO / Challenger Specialty Wheel Tractors published in 2007

Speeds

Description With 18.4R38 rear tires. / 50 KPH speeds available with front-axle suspension.

Tractor Tests

Description OECD 5153: diesel AutoPower IV 4WD / OECD 2193: diesel CVT 4WD

Variants

6465 similar Massey Ferguson model
7465 similar Massey Ferguson model