Challenger MT875C Specs ( 2009-2013 )
Production
| Description | Agricultural Crawler tractor / Built in Jackson, Minnesota, USA / Original price was $473,854 in 2013 |
|---|---|
| Manufacturer | Challenger (a part of AGCO) |
Engine
| Engine type | Caterpillar 0.0L 6-cyl diesel |
|---|---|
| Fuel tank | 330 gal (1249.0 L) |
| Bore/Stroke | 5.71x7.2 inches (145 x 183 mm) |
| Description | Caterpillar C18 ACERT / turbocharged aftercooled diesel / 6-cylinder 24-valve / liquid-cooled |
| Displacement | 1,106 ci (18.1 L) |
| Emissions | Tier III |
| Fuel system | mechanical electric injector unit (MEUI) |
| Maximum Power | 631 hp (470.5 kW) |
| Power (gross) | 585 hp (436.2 kW) |
| Rated RPM | 2100 |
| Starter | electric |
| Starter volts | 12 |
| Drawbar (tested) | 441.14 hp (329.0 kW) |
| Engine (gross) | 585 hp (436.2 kW) |
| PTO (claimed) | 425 hp (316.9 kW) |
| PTO (tested) | 586.45 hp (437.3 kW) |
Transmission
| Clutch | hydraulic wet discs |
|---|---|
| Gears | 16 forward and 4 reverse |
| Transmission | Caterpillar Powershift |
| Transmission type | 16-speed full power shift |
| Type | full power shift |
Mechanical
| Cab | Cab standard with air-conditioning. |
|---|---|
| Description | Hydraulic wet discs brakes |
| Drive | crawler |
| Steering | speed sensitive differential |
| Trailer brakes | hydraulic OptOptional |
Hydraulics
| Pressure | 2900 psi (200.0 bar) |
|---|---|
| SCV flow | 36 gpm (136.3 lpm) |
| Total flow | 43.5 gpm (164.6 lpm) |
| Type | closed center pressure-flow compensated |
| Valves | 4 to 6 |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Electrical
| Batteries | 4 |
|---|---|
| Battery CCA | 1000 |
| Battery volts | 12 |
| Charging amps | 185 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (drawbar) | 14.4 inches (36 cm) |
|---|---|
| Gauge | 90 to 128 inches (228 to 325 cm) |
| Height (cab) | 138.1 inches (350 cm) |
| Length | 270 inches (685 cm) |
| Max weight | 50,000 lbs (22680 kg) |
| Shipping weight | 42,200 lbs (19141 kg) |
| Wheelbase | 118 inches (299 cm) |
| Width | 141.8 inches (360 cm) |
Challenger MT875C Tracks
| Width | 30 inches (76 cm) / 18 inches (45 cm) / 36 inches (91 cm) |
|---|
Dimensions & Tracks
| Description | 30-inch tracks |
|---|---|
| Weight | 42,200 lbs (19141 kg) |
| Wheelbase | 118 inches (299 cm) |
OCED Tractor Test 1965
| Description | Diesel 16-speed crawlerNovember 11 - 20, 2009Link: OCED Tractor Test 1965 file / PTO performance / Drawbar performance / Gear 8 used for power test. / Gear 5 used for pull test. |
|---|---|
| Fuel use | 32.2 gal/hour (121.9 l/hour) / 32.3 gal/hour (122.3 l/hour) / 33.1 gal/hour (125.3 l/hour) / 32.6 gal/hour (123.4 l/hour) |
| Max power | 586.45 hp (437.3 kW) / 441.14 hp (329.0 kW) |
| Max pull | 32745 lbs (14853 kg) |
| Power at rated engine speed | 521.31 hp (388.7 kW) |
| Power at rated PTO speed | 556.48 hp (415.0 kW) |
References
| Description | Challenger MT800C/MT900C published in 2008, by AGCO |
|---|