Home / Deutz-Allis / 8030

Deutz-Allis 8030 Specs ( 1985-1988 )

Compare Tractor

Production

Description Row-Crop tractor / Built in West Allis, Wisconsin, USA
Manufacturer Deutz-Allis
Original price $52,398
Total built 2,328

Engine

Engine type Allis Chalmers 7.0L 6-cyl diesel
Air cleaner dry
Bore/Stroke 4.25x5.00 inches (108 x 127 mm)
Compression 15.5:1
Coolant capacity 31 qts (29.3 L)
Description Allis Chalmers 670T / turbocharged diesel / 6-cylinder / liquid-cooled inline
Displacement 426 ci (7.0 L)
Oil capacity 19 qts (18.0 L)
Rated RPM 2300
Starter volts 12
Drawbar (tested) 115.22 hp (85.9 kW)
PTO (tested) 133.75 hp (99.7 kW)

Transmission

Description Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. / Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. / Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
Gears 16 forward and 4 reverse / 20 forward and 4 reverse / 12 forward and 2 reverse
Oil capacity 29.6 qts (28.0 L) / 29.6 qts (28.0 L) / 29.6 qts (28.0 L)
Transmission Allis-Chalmers Power Director / Allis-Chalmers Power Director / Power Shift
Type partial power shift / partial power shift / Allis-Chalmers
Transmission type 16-speed partial power shift / 20-speed partial power shift / 12-speed Allis-Chalmers
Transmission type 16-speed partial power shift / 20-speed partial power shift / 12-speed Allis-Chalmers

Mechanical

Description Differential hydraulic wet discs brakes / Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.
Differential lock electro-hydraulic rear
Drive type Two- or four-wheel drive
Steering hydrostatic power

Capacity

Fuel 60 gal (227.1 L)
Rear diff. 66.8 qts (63.2 L)

Hydraulics

Pump flow 22 gpm (83.3 lpm)
Steering flow 9.5 gpm (36.0 lpm)
Total flow 45 gpm (170.3 lpm)
Type closed-center load-sensitive
Valves 2 or 3

Hitch

Rear lift (at 24"/610mm) 6,680 lbs (3030 kg)
Rear Type III/II

PTO

Rear PTO independent
Rear PTO Type 540/1000

Electrical

Battery volts 12
Charging amps 100
Charging system alternator

Dimensions & Tires

Ag front 10.00-16 (2WD) / 11.00-16 (2WD)
Ag rear 18.4-38 / 20.8-38
Ground clearance 17.5 inches (4WD front axle) (44 cm)
Length 187 inches (474 cm)
Wheelbase 106 inches (2WD) (269 cm)
Width 93.4 inches (237 cm)
Front tire 10.00-16
Rear tire 18.4-38
Weight 14200 to 15015 pounds
Wheelbase 106 inches (2WD) (269 cm)

8030 Serial Number Location

Description Serial number stamped into the casting above the PTO shield.

8030 Serial Numbers

1981 1001
1982 1009
1983 2093
1984 2701
1985 3146
Description FAQ: How to read a serial number table.
Final 3328

Deutz-Allis 8030 Height

Cab 115 inches (292 cm)
Exhaust 113 inches (287 cm)
Hood 69 inches (175 cm)

Deutz-Allis 8030 Weight

Ballasted 17,100 lbs (7756 kg)
Operating 15,015 lbs (2WD duals) (6810 kg)
Shipping 14,200 lbs (4WD) (6441 kg)

Nebraska Tractor Test 1447

Description Diesel 12-speed 2WDAugust 31 - September 13, 1982Link: Nebraska Tractor Test 1447 file / PTO performance / Drawbar performance / Gear 2F used for power test. / Gear 3S used for pull test.
Fuel use 8.9 gal/hour (33.7 l/hour) / 8.8 gal/hour (33.3 l/hour) / 8.9 gal/hour (33.7 l/hour)
Max power 115.22 hp (85.9 kW)
Max pull 13,348 lbs (6054 kg)
Power at rated engine speed 133.75 hp (99.7 kW)
Power at rated PTO speed 134.42 hp (100.2 kW)

Speeds

Description With 18.4x38 rear tires. / With 18.4x38 rear tires. / With 18.4x38 rear tires.