Home / Farmall / 1026

Farmall 1026 Specs ( 1970-1971 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Rock Island, Illinois, USA / Original price was $11,800 in 1971
Manufacturer Farmall (a part of International Harvester)
Total built 2,414

Engine

Engine type International Harvester 6.7L 6-cyl diesel
Fuel tank 42 gal (159.0 L)
Air cleaner dual-stage dry
Bore/Stroke 4.321x4.625 inches (110 x 117 mm)
Compression 16:1
Coolant capacity 24 qts (22.7 L)
Description International Harvester DT-407 / turbocharged diesel / 6-cylinder / liquid-cooled
Displacement 406.9 ci (6.7 L)
Idle RPM 900-2400
Oil capacity 13 qts (12.3 L)
Power (gross) 127 hp (94.7 kW)
Power (net) 123 hp (91.7 kW)
Rated RPM 2400
Starter volts 12
Drawbar (tested) 80.24 hp (59.8 kW)
Engine (gross) 127 hp (94.7 kW)
Engine (net) 123 hp (91.7 kW)
PTO (claimed) 112 hp (83.5 kW)
PTO (tested) 112.45 hp (83.9 kW)

Transmission

Description hydrostatic
Gears infinite forward and reverse (2-range)
Oil capacity 28 qts (26.5 L)
Type hydrostatic

Mechanical

Cab Open operator station.
Description Power steering / Differential hydraulic dry disc brakes
Drive type Two- or four-wheel drive

Hydraulics

Rear valves 1 or 2
Type open center

Hitch

Control hydraulic draft control
Rear Type II

PTO

Clutch hydraulic disc
Engine RPM 540@2100
Rear PTO independent
Rear PTO Type 1000

Electrical

Batteries 2
Battery AH 204
Battery volts 6
Charging system alternator

Dimensions & Tires

Ballasted weight 14975 lbs (6792 kg)
Bar rear axle 3.25 inch diameter (82 mm)
Front tread 60 to 84 inches (152 to 213 cm)
Height (steering wheel) 86 inches (218 cm)
Length 166 inches (421 cm)
Operating weight 11100 lbs (5034 kg)
Wheelbase 105 inches (266 cm)
Front tire 11L-15
Rear tire 18.4-38
Weight 11100 lbs (5034 kg)
Wheelbase 105 inches (266 cm)
Ag front 11L-15
Ag rear 18.4-38

1026 Serial Number Location

Description Serial number plate on the left side of the hydrostatic housing, ahead of the batteries.

1026 Serial Numbers

1970 7501
1971 9707
Description FAQ: How to read a serial number table.

Farmall 1026 attachments

Description front-end loader

Nebraska Tractor Test 1047

Description Diesel hydro 2WDJune 3 - 27, 1970Link: Nebraska Tractor Test 1047 file / PTO performance / Drawbar performance
Fuel use 7.9 gal/hour (29.9 l/hour) / 7.1 gal/hour (26.9 l/hour) / 7.8 gal/hour (29.5 l/hour)
Max power 80.24 hp (59.8 kW)
Max pull 9,583 lbs (4346 kg)
Power at rated engine speed 112.45 hp (83.9 kW)
Power at rated PTO speed 110.71 hp (82.6 kW)

References

Description Farm Loaders published in 1970, by International Harvester / Spring 1970 Buyer's Guide published by International Harvester / Spring 1971 Buyer's Guide published by International Harvester / Farm Equipment Reference Catalog published in 1970, by International Harvester

Variants

Farmall 1026 row-crop
IH 1026 standard
IH 21026 industrial