Home / Farmall / 450

Farmall 450 Specs ( 1956-1958 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Rock Island, Illinois, USA
Manufacturer Farmall (a part of International Harvester)
Total built 18,305

Engine

Air cleaner oil bath
Bore/Stroke 4.125x5.25 inches (105 x 133 mm) / 4.125x5.25 inches (105 x 133 mm) / 4.125x5.25 inches (105 x 133 mm)
Compression 6.6:1 / 17.45:1 / 8.35:1
Coolant capacity 28 qts (26.5 L)
Description International Harvester C281 / gasoline / 4-cylinder / liquid-cooled inline / International Harvester / diesel / 4-cylinder / liquid-cooled inline / International Harvester / LP gas / 4-cylinder / liquid-cooled vertical I-head
Displacement 281 ci (4.6 L) / 281 ci (4.6 L) / 281 ci (4.6 L)
Oil capacity 8 qts (7.6 L) / 9 qts (8.5 L)
Rated RPM 1450 / 1450 / 1450
Starter volts 6 / 12 / 6
Engine type International Harvester 4.6L 4-cyl gasoline / International Harvester 4.6L 4-cyl diesel / International Harvester 4.6L 4-cyl LP gas
Engine type International Harvester 4.6L 4-cyl gasoline / International Harvester 4.6L 4-cyl diesel / International Harvester 4.6L 4-cyl LP gas
Fuel tank 21 gal (79.5 L)
Belt (claimed) 57.1 hp (gas) (42.6 kW)
Belt (tested) 55.28 hp (41.2 kW)
Drawbar (claimed) 51.3 hp (gas) (38.3 kW)
Drawbar (tested) 51.25 hp (38.2 kW)

Transmission

Clutch dry disc
Gears 10 forward and 2 reverse
Transmission International Harvester Torque Amplifier
Transmission type 10-speed partial power shift
Type partial power shift

Mechanical

Cab Open operator station.
Description Mechanical disc brakes
Drive type Two-wheel drive
Steering power assist

Hydraulics

Type Hydra-Touch
Valves 1 to 3

Hitch

Type IH Fast Hitch

PTO

Rear PTO transmission
Rear PTO Type 540 (1.375)

Dimensions & Tires

Bar rear axle 2.75 inch diameter (69 mm)
Height (steering wheel) 80 inches (203 cm)
Length 143 inches (363 cm)
Weight 6,519 lbs (2957 kg)
Wheelbase 95.75 inches (243 cm)
Width 84 inches (213 cm)
Front tire 6.00-16
Rear tire 13.6-38
Weight 6,519 lbs (2957 kg)
Wheelbase 95.75 inches (243 cm)
Ag front 6.00-16
Ag rear 13.6-38

450 Serial Number Location

Description Serial number plate on the left side of the Farmall 450 clutch housing.

450 Serial Numbers

1956 501
1957 1734
1958 21871
Description FAQ: How to read a serial number table.

Belt Pulley

Diameter 11 inches (27 cm)
RPM 899
Speed 2588 ft/min (788.82 meters/min)
Width 7 inches (17 cm)

Farmall 450 attachments

Description front-end loader

Nebraska Tractor Test 608

Belt fuel use (max) 3.6 gal/hour (13.6 l/hour)
Belt power (max) 48.78 hp (36.4 kW)
Description Diesel Torque Amplifier 2WDMarch 18 - April 1, 1957Link: Nebraska Tractor Test 608 file / Drawbar performance / Gear 3-Direct used for power test. / Gear 1-TA used for pull test.
Max power 45.47 hp (33.9 kW)
Max pull 6,634 lbs (3009 kg)

Nebraska Tractor Test 612

Belt fuel use (max) 4.8 gal/hour (18.2 l/hour)
Belt power (max) 55.28 hp (41.2 kW)
Description Gasoline Torque Amplifier 2WDApril 9 - 14, 1957Link: Nebraska Tractor Test 612 file / Drawbar performance / Gear 3-Direct used for power test. / Gear 1-TA used for pull test.
Max power 51.25 hp (38.2 kW)
Max pull 7,318 lbs (3319 kg)

Nebraska Tractor Test 620

Belt fuel use (max) 5.8 gal/hour (22.0 l/hour)
Belt power (max) 54.12 hp (40.4 kW)
Description LP gas Torque Amplifier 2WDMay 7 - 29, 1957Link: Nebraska Tractor Test 620 file / Drawbar performance / Gear 3-Direct used for power test. / Gear 1-TA used for pull test.
Max power 49.94 hp (37.2 kW)
Max pull 7,333 lbs (3326 kg)

References

Description Farm Loaders published in 1962, by International Harvester / Farmall 450 published in 1956, by International Harvester

Tractor Tests

Description NTTL 612: gasoline Torque Amplifier 2WD / NTTL 608: diesel Torque Amplifier 2WD / NTTL 620: LP gas Torque Amplifier 2WD

Variants

450 row-crop
450 Hi-Clear high-crop
W-450 standard-front