Production
| Description | Row-Crop tractor / Built in Rock Island, Illinois, USA / Original price was $4,100 in 1963 / The Farmall 460 experienced rear-end problems associated with too much engine power for the final drive. International offered an entirely new rear end in mid 1959 to replace the original. |
|---|---|
| Manufacturer | Farmall (a part of International Harvester) |
Engine
| Air cleaner | oil bath / oil bath / oil bath |
|---|---|
| Bore/Stroke | 3.5625x3.6875 inches (90 x 94 mm) / 3.6875x3.6875 inches (94 x 94 mm) / 3.5625x3.6875 inches (90 x 94 mm) |
| Compression | 7.2:1 / 8.75:1 |
| Description | International Harvester C-221 / gasoline / 6-cylinder / liquid-cooled / International Harvester D-236 / diesel / 6-cylinder / liquid-cooled / International Harvester / LP gas / 6-cylinder / liquid-cooled |
| Displacement | 221 ci (3.6 L) / 236 ci (3.9 L) / 221 ci (3.6 L) |
| Rated RPM | 1800 / 1800 / 1800 |
| Starter volts | 12 / 12 / 12 |
| Oil capacity | 9 qts (8.5 L) |
| Engine type | International Harvester 3.6L 6-cyl gasoline / International Harvester 3.9L 6-cyl diesel / International Harvester 3.6L 6-cyl LP gas |
| Engine type | International Harvester 3.6L 6-cyl gasoline / International Harvester 3.9L 6-cyl diesel / International Harvester 3.6L 6-cyl LP gas |
| Belt (tested) | 50.10 hp (37.4 kW) |
| Drawbar (claimed) | 45.3 hp (33.8 kW) |
| Drawbar (tested) | 46.11 hp (34.4 kW) |
| Plows | 4 |
| PTO (claimed) | 49.47 hp (36.9 kW) |
Transmission
| Description | Tractor must be stopped and clutch used to shift gears. An option "heavy tillage gear" was available to replace the third speed in the transmission. Serial number suffix "CC" indicates this option. |
|---|---|
| Gears | 5 forward and 1 reverse / 10 forward and 2 reverse |
| Oil capacity | 40 qts (37.9 L) / 40 qts (37.9 L) |
| Oil type | IH Hy-Tran / IH Hy-Tran |
| Transmission | sliding gear / Torque Amplifier |
| Transmission type | 5-speed / 10-speed |
| Transmission type | 5-speed / 10-speed |
Mechanical
| Cab | Open operator station. |
|---|---|
| Description | Differential mechanical disc brakes |
| Drive type | Two-wheel drive |
| Steering | power |
Capacity
| Hydraulic system | 10 gal (37.9 L) |
|---|
Hydraulics
| Capacity | 10 gal (37.9 L) |
|---|---|
| Pump flow | 12 gpm (45.4 lpm) |
| Valves | 2 |
Hitch
| Type | IH Fast Hitch |
|---|
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540 |
Electrical
| Batteries | 2 (diesel) |
|---|---|
| Battery volts | 6 (diesel) |
| Charging amps | 20 |
| Charging system | generator |
Dimensions & Tires
| Ground clearance | 19.5 inches (frame) (49 cm) |
|---|---|
| Height (steering wheel) | 78 inches (row-crop) (198 cm) |
| Length | 140 inches (355 cm) |
| Wheelbase | 95 inches (241 cm) |
| Width | 83.5 inches (min) (212 cm) |
| Front tire | 5.50-16 |
| Rear tire | 12.4-38 |
| Weight | 5835 to 6055 pounds |
| Wheelbase | 95 inches (241 cm) |
| Ag front | 5.50-16 |
| Ag rear | 12.4-38 |
460 Serial Number Location
| Description | Serial number plate on the right side of the Farmall 460, on the clutch housing. |
|---|
460 Serial Numbers
| 1958 | 501 |
|---|---|
| 1959 | 4765 |
| 1960 | 16900 |
| 1961 | 22622 |
| 1962 | 28029 |
| 1963 | 31552 |
| Description | FAQ: How to read a serial number table. |
| Final | 33028 |
Farmall 460 Weight
| Ballasted | 8,931 lbs (4051 kg) |
|---|---|
| Operating | 5,835 lbs (gas) (2646 kg) |
Farmall 460 attachments
| Description | front-end loader |
|---|
Nebraska Tractor Test 670
| Belt fuel use (max) | 4.2 gal/hour (15.9 l/hour) |
|---|---|
| Belt power (max) | 49.47 hp (36.9 kW) |
| Description | Gasoline Torque Amplifier 2WDSeptember 22 - October 3, 1958Link: Nebraska Tractor Test 670 file / Drawbar performance |
| Fuel use | 3.6 gal/hour (13.6 l/hour) |
| Max power | 35.95 hp (26.8 kW) |
Nebraska Tractor Test 672
| Belt fuel use (max) | 3.6 gal/hour (13.6 l/hour) |
|---|---|
| Belt power (max) | 50.10 hp (37.4 kW) |
| Description | Diesel Torque Amplifier 2WDSeptember 30 - October 11, 1958Link: Nebraska Tractor Test 672 file / Drawbar performance / Gear 3-DD used for power test. / Gear 1-TA used for pull test. |
| Fuel use | 2.9 gal/hour (11.0 l/hour) |
| Max power | 36.19 hp (27.0 kW) |
| Max pull | 6,846 lbs (3105 kg) |
Nebraska Tractor Test 676
| Belt fuel use (max) | 5.6 gal/hour (21.2 l/hour) |
|---|---|
| Belt power (max) | 49.85 hp (37.2 kW) |
| Description | LP gas Torque Amplifier 2WDOctober 20 - 25, 1958Link: Nebraska Tractor Test 676 file / Drawbar performance / Gear 3-DD used for power test. / Gear 1-TA used for pull test. |
| Max power | 46.11 hp (34.4 kW) |
| Max pull | 6,903 lbs (3131 kg) |
References
| Description | Farm Loaders published in 1962, by International Harvester / Farm Loaders published in 1965, by International Harvester / Farm Loaders published in 1970, by International Harvester / Operator's Manual Farmall 460 Diesel, 560 Diesel and International 560 Diesel Tractors (1014077R1) published in 1959 / Operator's Manual Farmall 460, 560 and International 560 (1 014 051 R1) published in 1958 / Direct-Start Diesel Tractors published in 1958, by International Harvester |
|---|
Speeds
| Description | with 12.4-38 rear tires. / With 12.4-38 rear tires. |
|---|
Tractor Tests
| Description | NTTL 670: gasoline Torque Amplifier 2WD / NTTL 672: diesel Torque Amplifier 2WD / NTTL 676: LP gas Torque Amplifier 2WD |
|---|
Variants
| Hi-Clear | high-crop |
|---|---|
| IH 460 | utility |