Home / Farmall / 806

Farmall 806 Specs ( 1963-1967 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Rock Island, Illinois, USA
Manufacturer Farmall (a part of International Harvester)
Total built 42,957

Engine

Air cleaner two-stage dry / two-stage dry / two-stage dry
Bore/Stroke 4.125x4.50 inches (105 x 114 mm) / 3.8125x4.39 inches (97 x 112 mm) / 3.8125x4.39 inches (97 x 112 mm)
Compression 17:1
Description International Harvester D-361 / diesel / 6-cylinder / liquid-cooled / International Harvester C-301 / gasoline / 6-cylinder / liquid-cooled / International Harvester C-301 / LP-gas / 6-cylinder / liquid-cooled
Displacement 361 ci (5.9 L) / 301 ci (4.9 L) / 301 ci (4.9 L)
Idle RPM 900-2400
Power (gross) 110 hp (82.0 kW)
Rated RPM 2400 / 2400 / 2400
Starter volts 12 / 12 / 12
Engine type International Harvester 5.9L 6-cyl diesel / International Harvester 4.9L 6-cyl gasoline / International Harvester 4.9L 6-cyl LP-gas
Engine type International Harvester 5.9L 6-cyl diesel / International Harvester 4.9L 6-cyl gasoline / International Harvester 4.9L 6-cyl LP-gas
Fuel tank 42 gal (159.0 L)
LP-gas Fuel tank 47 gal (177.9 L)
Drawbar (claimed) 84 hp (62.6 kW)
Drawbar (tested) 84.77 hp (63.2 kW)
Engine (gross) 110 hp (82.0 kW)
PTO (claimed) 94.5 hp (70.5 kW)
PTO (tested) 94.93 hp (70.8 kW)

Transmission

Clutch 12-inch dry disc / 12-inch dry disc
Description Four gears (1-4) in low, high, and reverse ranges. / As two-range Torque Amplifer (TA) to the basic transmission. Pulling back on the left-hand TA lever provides a clutchless shift to a lower speed for each gear. Pushing the lever forward return to direct-drive mode.
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Transmission Torque Amplifier
Type unsynchronized / two-speed power shift
Transmission type 8-speed unsynchronized / 16-speed two-speed power shift
Transmission type 8-speed unsynchronized / 16-speed two-speed power shift

Mechanical

Cab Open operator station.
Description Power steering / Hydraulic dry disc brakes
Drive type Two-wheel drive
Final drives bull gear

Hydraulics

Pump flow 12 gpmOptOptional (45.4 lpm)
Steering flow 9 gpm (34.1 lpm)
Type open center

Hitch

Rear Type II/I
Type IH Fast Hitch

PTO

Engine RPM 540@2100
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2 (diesel)
Battery AH 170 (diesel)
Battery volts 6 (diesel)
Charging amps 25
Charging system generator
Ground negative

Dimensions & Tires

Front tread 8/16 inches (20/40 cm)
Height (steering wheel) 81 inches (205 cm)
Length 161 inches (408 cm)
Rear axle 3.25 inch diameter (82 mm)
Rear tread 56 to 94 inches (142 to 238 cm)
Wheelbase 101.2 inches (257 cm)
Width 110 inches (279 cm)
Front tire 6.50-16
Rear tire 15.5-38
Weight 7720 to 8500 pounds
Wheelbase 101.2 inches (257 cm)
Ag front 6.50-16
Ag rear 15.5-38

806 Serial Numbers

1963 501
1964 4709
1965 15946
1966 24038
1967 34943
Description FAQ: How to read a serial number table.

Farmall 806 Weight

Ballasted 11895 lbs (5395 kg)
Diesel Shipping 8500 lbs (3855 kg)
Gasoline Shipping 7720 lbs (3501 kg)

Farmall 806 attachments

Description front-end loader

Nebraska Tractor Test 857

Description Diesel Torque Amplifier 2WDOctober 22 - 30, 1963Link: Nebraska Tractor Test 857 file / PTO performance / Drawbar performance / Gear 2H-TA used for power test. / Gear 3L-TA used for pull test.
Fuel use 6.3 gal/hour (23.8 l/hour) / 5.9 gal/hour (22.3 l/hour) / 6.4 gal/hour (24.2 l/hour)
Max power 84.77 hp (63.2 kW)
Max pull 9,182 lbs (4164 kg)
Power at rated engine speed 94.93 hp (70.8 kW)
Power at rated PTO speed 89.04 hp (66.4 kW)

Nebraska Tractor Test 859

Description Gasoline Torque Amplifier 2WD10/28/1963Link: Nebraska Tractor Test 859 file / PTO performance / Drawbar performance / Gear 2H-TA used for power test. / Gear 3L-TA used for pull test.
Fuel use 7.4 gal/hour (28.0 l/hour) / 6.6 gal/hour (25.0 l/hour) / 7.5 gal/hour (28.4 l/hour)
Max power 80.70 hp (60.2 kW)
Max pull 9,003 lbs (4083 kg)
Power at rated engine speed 93.27 hp (69.6 kW)
Power at rated PTO speed 83.99 hp (62.6 kW)

Nebraska Tractor Test 861

Description LP-gas Torque Amplifier 2WDNovember 6 - 26, 1963Link: Nebraska Tractor Test 861 file / PTO performance / Drawbar performance / Gear 2H-TA used for power test. / Gear 3L-TA used for pull test.
Fuel use 9.6 gal/hour (36.3 l/hour) / 8.4 gal/hour (31.8 l/hour) / 9.5 gal/hour (36.0 l/hour)
Max power 81.53 hp (60.8 kW)
Max pull 9,072 lbs (4115 kg)
Power at rated engine speed 93.42 hp (69.7 kW)
Power at rated PTO speed 83.20 hp (62.0 kW)

Questions

Description What does the S - Y stand for in a Farmall 806 serial number? The S suffix is for the Torque Amplifier transmission. The Y suffix indicates the optional 12 GPM hydraulic pump.

References

Description Farm Loaders published in 1965, by International Harvester / Farm Loaders published in 1970, by International Harvester / 706 - 806 Farmall Tractors published by International Harvester / New McCormick Farmall 806 Tractor published in 1963, by International Harvester

Speeds

Description With 15.5-38 rear tires. / With 15.5-38 rear tires.

Tractor Tests

Description NTTL 857: diesel Torque Amplifier 2WD / NTTL 859: gasoline Torque Amplifier 2WD / NTTL 861: LP-gas Torque Amplifier 2WD

Variants

Farmall 806 row-crop
IH 806 standard-tread