Home / Farmall / H

Farmall H Specs ( 1939-1953 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Rock Island, Illinois, USA / Original price was $2,000 in 1953 / The Farmall H is the row-crop version of the McCormick-Deering W-4.
Manufacturer Farmall (a part of International Harvester)
Total built 391,227

Engine

Bore/Stroke 3.375x4.25 inches (86 x 108 mm) / 3.375x4.25 inches (86 x 108 mm) / 3.375x4.25 inches (86 x 108 mm)
Compression 5.9:1 / 4.75:1 / 4.5:1
Coolant capacity 16.5 qts (15.6 L) / 16.5 qts (15.6 L) / 16.5 qts (15.6 L)
Description International Harvester C-152 / gasoline / 4-cylinder / liquid-cooled / International Harvester / distillate / 4-cylinder / liquid-cooled vertical I-head / International Harvester / kerosene / 4-cylinder / liquid-cooled
Displacement 152.1 ci (2.5 L) / 152.1 ci (2.5 L) / 152.1 ci (2.5 L)
Exhaust valve clearance 0.017 inches*Hot (0.432 mm)
Firing order 1-3-4-2 / 1-3-4-2 / 1-3-4-2
Intake valve clearance 0.017 inches*Hot (0.432 mm)
Oil capacity 6 qts (5.7 L) / 6 qts (5.7 L) / 6 qts (5.7 L)
Point gap 0.013 inches (0.330 mm)
Rated RPM 1650
Sparkplug gap 0.025 inches (0.635 mm)
Starter hand-crank
Starter volts 6
Engine type International Harvester 2.5L 4-cyl gasoline / International Harvester 2.5L 4-cyl distillate / International Harvester 2.5L 4-cyl kerosene
Engine type International Harvester 2.5L 4-cyl gasoline / International Harvester 2.5L 4-cyl distillate / International Harvester 2.5L 4-cyl kerosene
Belt (claimed) 24 hp (17.9 kW)
Belt (tested) 26.20 hp (19.5 kW)
Drawbar (claimed) 19 hp (14.2 kW)
Drawbar (tested) 24.17 hp (18.0 kW)

Transmission

Clutch dry disc
Gears 5 forward and 1 reverse
Oil capacity 24 qts (22.7 L)
Transmission type 5-speed sliding gear
Type sliding gear

Mechanical

Cab Open operator station.
Description Manual steering / Mechanical contracting band brakes
Drive type Two-wheel drive

Capacity

Aux. fuel 0.875 gal (3.3 L)
Fuel 17.5 gal (66.2 L)
Hydraulic system 1 gal (3.8 L)

Hydraulics

Capacity 1 gal (3.8 L)
Type open center OptOptional

Hitch

Type Lift-All *Hydraulic implement lift system.

PTO

Rear PTO Type 540 *The 1-3/8 shaft was adopted in 1942. Prior to that, a 1-1/8 inch shaft was used.

Electrical

Battery volts 6
Charging system generator
Ground positive

Dimensions & Tires

Front tread 8.1 inches (20 cm)
Height (steering wheel) 74 inches (187 cm)
Length 125.25 inches (318 cm)
Rear tread 44 to 80 inches (111 to 203 cm)
Weight 3875 lbs (1757 kg)
Wheelbase 88.325 inches (224 cm)
Width 75.5 inches (191 cm)
Front tire 5.50-16
Rear tire 51x6
Weight 3875 lbs (1757 kg)
Wheelbase 88.325 inches (224 cm)
Ag front 5.50-16 / 6x20 (HV)
Ag rear 51x6 (steel)

Farmall H attachments

Description front-end loader

H Serial Number Location

Description Transmission housing on left.

H Serial Numbers

1939 501
1940 10653
1941 52387
1942 93237
1943 122091
1944 150251
1945 186123
1946 214820
1947 241143
1948 268991
1949 300876
1950 327975
1951 351923
1952 375861
1953 390500
Description FAQ: How to read a serial number table.

Links

Description Farmall-H.com: detailed information on the H

Nebraska Tractor Test

Belt fuel use (max) 2.3 gal/hour (8.7 l/hour)
Belt power (max) 26.20 hp (19.5 kW)
Description Gasoline 5-speed 2WDOctober 5 - 11, 1939Link: Nebraska Tractor Test file / Drawbar performance / Gear 2 used for power test. / Gear 1 used for pull test.
Max power 24.17 hp (18.0 kW)
Max pull 3,603 lbs (1634 kg)

Nebraska Tractor Test 334

Belt power (max) 23.3 hp (17.4 kW)
Description Distillate 5-speed 2WDNovember 6 - 11, 1939Link: Nebraska Tractor Test 334 file / Drawbar performance / Gear 2 used for power test. / Gear 1 used for pull test.
Max power 21.4 hp (16.0 kW)
Max pull 3,169 lbs (1437 kg)

References

Description Farmall Letter Series Tractors by Lee Klancher / No. 30 Power Loader published by International Harvester / Farm Loaders published in 1962, by International Harvester / Operator's Manual Farmall H (5358) published in 1940 / General Line Catalog published in 1949, by International Harvester

Variants

H row-crop
HV high-crop
I-4 industrial
O-4 orchard
W-4 standard tread