Home / Farmall / Super M

Farmall Super M Specs ( 1952-1954 )

Compare Tractor

Production

Description Row-Crop tractor / Original price was $2,500 in 1954 / The basic Farmall/IH model is the Super M. The Super MD is diesel. The Super MTA has the torque amplifier and independent PTO, and was built only in 1954.
Factories Rock Island, Illinois, USA
Manufacturer Farmall (a part of International Harvester)
Total built 57,092

Engine

Air cleaner oil bath / oil bath
Bore/Stroke 4.00x5.25 inches (102 x 133 mm) / 4.00x5.25 inches (102 x 133 mm)
Compression 5.9:1 / 6.75:1
Coolant capacity 26 qts (24.6 L)
Description International Harvester C264 / gasoline / 4-cylinder / liquid-cooled vertical I-head / International Harvester / LP gas / 4-cylinder / liquid-cooled vertical I-head
Displacement 264 ci (4.3 L) / 264 ci (4.3 L)
Exhaust valve clearance 0.017 inches (hot) (0.432 mm)
Firing order 1-3-4-2 / 1-3-4-2
Fuel use 3.657 gal/hour (13.8 l/hour) / 5.211 gal/hour (19.7 l/hour)
Idle RPM 400-1600
Intake valve clearance 0.017 inches (hot) (0.432 mm)
Rated RPM 1450 / 1450
Sparkplug gap 0.023 inches (0.584 mm)
Starter volts 6 / 6
Oil capacity 8 qts (7.6 L)
Engine type International Harvester 4.3L 4-cyl gasoline / International Harvester 4.3L 4-cyl LP gas
Aux. fuel 0.9 gal (3.4 L)
Engine type International Harvester 4.3L 4-cyl gasoline / International Harvester 4.3L 4-cyl LP gas
Fuel tank 21 gal (79.5 L)
Belt (tested) 47.07 hp (35.1 kW)
Drawbar (tested) 44.23 hp (33.0 kW)

Transmission

Clutch 12-inch dry disc
Gears 5 forward and 1 reverse
Oil capacity 52 qts (49.2 L)
Transmission type 5-speed sliding gear
Type sliding gear

Mechanical

Cab Open operator station.
Description Manual steering / Differential mechanical dry disc brakes
Drive type Two-wheel drive

Hydraulics

Type IH Lift-All *Transmission driven pump on early model, live engine-driven pump on Stage II models

PTO

Rear PTO transmission
Rear PTO Type 540

Electrical

Battery volts 6
Charging system generator
Ground positive

Dimensions & Tires

Bar rear axle 2.75 inch diameter (69 mm)
Clearance (rear axle) 26.25 inches (66 cm)
Ground clearance 15.5 inches (frame) (39 cm)
Height (steering wheel) 79 inches (200 cm)
Length 134.6 inches (341 cm)
Weight 5603 lbs (2541 kg)
Wheelbase 89.25 inches (226 cm)
Width 84.5 inches (214 cm)
Front tire 6.00-16
Rear tire 12-38
Weight 5603 lbs (2541 kg)
Wheelbase 89.25 inches (226 cm)
Ag front 6.00-16
Ag rear 12-38

Belt Pulley

Diameter 11 inches (27 cm)
RPM 899
Speed 2588 ft/min (788.82 meters/min)
Width 7.5 inches (19 cm)

Nebraska Tractor Test 475

Belt fuel use (max) 3.9 gal/hour (14.8 l/hour)
Belt power (max) 46.26 hp (34.5 kW)
Description Gasoline 5-speed 2WDJune 25 - July 2, 1952Link: Nebraska Tractor Test 475 file / Drawbar performance / Gear 3 used for power test. / Gear 1 used for pull test.
Max power 41.79 hp (31.2 kW)
Max pull 5,676 lbs (2574 kg)

Nebraska Tractor Test 484

Belt fuel use (max) 5.5 gal/hour (20.8 l/hour)
Belt power (max) 47.07 hp (35.1 kW)
Description LP gas 5-speed 2WDOctober 1 - 10, 1952Link: Nebraska Tractor Test 484 file / Drawbar performance / Gear 3 used for power test. / Gear 1 used for pull test.
Max power 44.23 hp (33.0 kW)
Max pull 6,115 lbs (2773 kg)

References

Description Farmall Letter Series Tractors by Lee Klancher / Operator's Manual Farmall Super M and Super MV (1004245R1) published in 1952

Speeds

Description With 12-38 rear tires.

Super M Serial Number Location

Description Left side of clutch housing

Super M Serial Numbers

1952 SM501 (Farmall Rock Island plant) / SML500001 (Louisville plant)
1953 SM21074 (Farmall Rock Island plant) / SML501906 (Louisville plant)
1954 SM51977 (Farmall Rock Island plant)
Description FAQ: How to read a serial number table.
Final SM52627 (Farmall Rock Island plant) / SML512541 (Louisville plant)

Tractor Tests

Description NTTL 475: gasoline 5-speed 2WD / NTTL 484: LP gas 5-speed 2WD

Variants

Super M gear with spark engine
Super MD gear with diesel engine
Super MD-TA TA with diesel engine
Super M-TA TA with spark engine
Super MV high-crop