Home / Ford / 8630

Ford 8630 Specs ( 1992-1997 )

Compare Tractor

Production

Description Built in Curitiba, Brazil / The Brazillian-built Ford 8630 is similar to the Fiat 160-90.
Manufacturer Ford (a part of New Holland)

Engine

Engine type Fiat 8.1L 6-cyl diesel
Air cleaner dual stage dry
Bore/Stroke 4.53x5.12 inches (115 x 130 mm)
Compression 15.5:1
Coolant capacity 28.5 qts (27.0 L)
Description Fiat 8365.25 / turbocharged diesel / 6-cylinder / liquid-cooled inline
Displacement 494.4 ci (8.1 L)
Exhaust valve clearance 0.017-0.019 inches (cold) (0.432 mm)
Firing order 1-5-3-6-2-4
Fuel system direct injection
Intake valve clearance 0.014-0.016 inches (cold) (0.356 mm)
Oil capacity 19.4 qts (18.4 L)
Power 160 hp (119.3 kW)
Rated RPM 2200
Starter electric
Starter volts 12
Torque 435.2 lb-ft (590.1 Nm)
Torque RPM 1400
Oil capacity 19.6 qts (18.5 L)
Drawbar (tested) 105.76 hp (78.9 kW)
PTO (claimed) 140 hp (104.4 kW)
PTO (tested) 121.25 hp (90.4 kW)

Transmission

Clutch 305mm cerametallic disc / 305mm cerametallic disc
Description Four gears (1-4) in three ranges (I, II, III) plus reverse (R) range. / Four gears (1-4) in three ranges (I, II, III) plus reverse (R) range with additional dual range shift (creeper/normal).
Gears 12 forward and 4 reverse / 24 forward and 8 reverse
Oil capacity 22.3 qts (21.1 L)
Transmission Funk Ultra Command / Dual Power - constant mesh / Constant mesh
Type partially synchronized / creeper
Transmission type 12-speed partially synchronized / 24-speed creeper
Transmission type 12-speed partially synchronized / 24-speed creeper

Mechanical

Cab Two-post ROPS. Cab optional with air-conditioning.
Description Power steering / Hydraulic wet disc brakes
Differential lock hydraulic
Drive type Four-wheel drive

Capacity

Front axle 13.6 qts (12.9 L)
Fuel 74 gal (280.1 L)
Hydraulic system 15.7 gal (59.4 L)
Steering 2 qts (1.9 L)

Hydraulics

Capacity 15.7 gal (59.4 L)
Pressure 2503 psi (172.6 bar)
Pump flow 14.5 gpm (54.9 lpm)
SCV flow 16.9 gpm (64.0 lpm)
Steering cap. 2 qts (1.9 L)
Steering press. 2025 psi (139.6 bar)
Type open center

Hitch

Control position and draft control
Rear lift (at 24"/610mm) 14650 lbs (6645 kg)
Rear Type II

PTO

Clutch hydraulic
Engine RPM 540@1000
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Battery AH 165
Battery volts 12
Charging amps 65
Charging system alternator

Dimensions & Tires

Ballasted weight 16810 lbs (7625 kg)
Front tread 70.9 to 86.6 inches (180 to 219 cm)
Ground clearance 16.4 inches (41 cm)
Length 174 inches (441 cm)
Rear tread 63.8 to 86.6 inches (162 to 219 cm)
Shipping weight 9600 lbs (4354 kg)
Wheelbase 113.6 inches (288 cm)
Width 112.7 inches (286 cm)
Front tire 14.9x28
Rear tire 18.4x38
Weight 9600 lbs (4354 kg)
Wheelbase 113.6 inches (288 cm)
Ag front 11.00-16 (2WD)
Ag rear 18.4/15-38
Standard tires (ag) Front: 14.9x28. Rear: 18.4x38

8630 Serial Numbers

1990 A925439
1991 A928924
1992 A930626
1993 A931957
Description FAQ: How to read a serial number table.
Location: Center of the rear axle in the rear

Ford 8630 Height

Cab 113.8 inches (289 cm)
Exhaust 124.6 inches (316 cm)
ROPS 115 inches (292 cm)

Ford 8630 attachments

Description front-end loader

Nebraska Tractor Test 1536

Description Diesel 16-speed 4WDSeptember 10 - 18, 1984Link: Nebraska Tractor Test 1536 file / PTO performance / Drawbar performance / Gear 5L used for power test. / Gear 1H used for pull test.
Fuel use 7.6 gal/hour (28.8 l/hour) / 1.0 gal/hour (3.8 l/hour) / 7.6 gal/hour (28.8 l/hour)
Max power 105.76 hp (78.9 kW)
Max pull 15,939 lbs (7229 kg)
Power at rated engine speed 121.25 hp (90.4 kW)
Power at rated PTO speed 115.58 hp (86.2 kW)

References

Description Front-end Loaders published in 1992, by Ford / Front-end Loaders published in 1995, by New Holland / 121 to 170 PTO hp Tractors published in 1993, by Ford / 8030 Series Tractors published in 1990, by Ford / Operator's Manual 8530 - 8630 - 8730 - 8830 (SE4812) published in 1990

Speeds

Description With 18.4x38 rear tires. / With 18.4x38 rear tires.