International Harvester 1086 Specs ( 1976-1981 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Rock Island, Illinois, USA
Manufacturer International Harvester
Original price $35,700 (1981)
Total built 47,420

Engine

Engine type International Harvester 6.8L 6-cyl diesel
Air cleaner dual dry element
Bore/Stroke 4.30x4.75 inches (109 x 121 mm)
Coolant capacity 25 qts (23.7 L)
Description International Harvester DT-414 / turbocharged diesel / 6-cylinder / liquid-cooled
Displacement 414 ci (6.8 L)
Rated RPM 2400
Oil capacity 20 qts (18.9 L)
Drawbar (claimed) 114 hp (85.0 kW)
Drawbar (tested) 113.04 hp (84.3 kW)
PTO (claimed) 130 hp (96.9 kW)
PTO (tested) 131.41 hp (98.0 kW)

Transmission

Description The transmission features three ranges (low, high, and reverse) with four gears (1-4) in each range. The range and gear can be shifted only when the tractor is stopped.
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Oil capacity 90 qts (85.2 L) / 90 qts (85.2 L)
Oil type IH Hy-Tran/B-6
Transmission Torque Amplifier
Type gear / two-speed power shift
Transmission type 8-speed gear / 16-speed two-speed power shift
Transmission type 8-speed gear / 16-speed two-speed power shift

Mechanical

Cab Cab standard with air-conditioning. Open operator station and four-post ROPS available.
Description Hydraulic disc brakes
Differential lock mechanical rear OptOptional
Drive type Two- or four-wheel drive
Final drives bull gear
Steering power assist

Capacity

Fuel 63 gal (main) (238.5 L)
Hydraulic system 22.5 gal (85.2 L)

Hydraulics

Capacity 22.5 gal (85.2 L)
Pump flow 12 gpm (45.4 lpm)
Type open center
Valves 2

Hitch

Rear Type III

PTO

Engine RPM 540@2100
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2
Battery CCA 470
Battery volts 12
Charging amps 42
Charging system alternator
Ground negative

Dimensions & Tires

Ground clearance 13 inches (33 cm)
Height (cab) 115 inches (292 cm)
Length 168 inches (2WD) (426 cm)
Wheelbase 105 inches (wide-tread front) (266 cm)
Width 102 inches (259 cm)
Front tire 10.00-16
Rear tire 18.4-38
Weight 12300 to 13030 pounds
Wheelbase 105 inches (wide-tread front) (266 cm)
Ag front 10.00-16 (2WD)
Ag rear 18.4-38

1086 Serial Number Location

Description Frame, right side ahead of the rear axle.

1086 Serial Numbers

1976 8601
1977 14725
1978 25672
1979 34731
1980 42186
1981 51671
Description FAQ: How to read a serial number table.

International Harvester 1086 Weight

Operating 12,715 lbs (2WD) (5767 kg)
Shipping 12,300 lbs (5579 kg)

Nebraska Tractor Test 1247

Description Diesel 16-speed 2WDJune 2 - 14, 1977Link: Nebraska Tractor Test 1247 file / PTO performance / Drawbar performance / Gear 1-Hi-TA used for power test. / Gear 2-Lo-DD used for pull test.
Fuel use 8.6 gal/hour (32.6 l/hour) / 8.2 gal/hour (31.0 l/hour) / 8.5 gal/hour (32.2 l/hour)
Max power 113.04 hp (84.3 kW)
Max pull 13,503 lbs (6124 kg)
Power at rated engine speed 131.41 hp (98.0 kW)
Power at rated PTO speed 133.67 hp (99.7 kW)

References

Description 1978 Buyer's Guide published by International Harvester / 1979 Buyer's Guide published by International Harvester / Buyer's Guide 1981 published by International Harvester / Series 86 Tractors published in 1976, by International Harvester / 86 Series Tractors - The pro-ag line published in 1976, by International Harvester / Operator's Manual 786, 886, 986, 1086, 1486, 1586 and Hydro-186 Tractors (1096207R4) published in 1986

Speeds

Description With 18.4-38 rear tires. / With 18.4-38 rear tires.

Variants

1086 Hi-Clear high clearance