International Harvester 3288 Specs ( 1981-1985 )
Production
| Description | Row-Crop tractor / Built in Rock Island, Illinois, USA / Original price was $40,000 in 1985 |
|---|---|
| Manufacturer | International Harvester |
| Total built | 1,162 |
Engine
| Engine type | International Harvester 5.9L 6-cyl diesel |
|---|---|
| Air cleaner | dual dry element |
| Bore/Stroke | 3.875x5.060 inches (98 x 129 mm) |
| Compression | 14.8:1 |
| Coolant capacity | 24 qts (22.7 L) |
| Description | International Harvester D358 / diesel / 6-cylinder / liquid-cooled |
| Displacement | 358 ci (5.9 L) |
| Idle RPM | 900-2400 |
| Rated RPM | 2400 |
| Starter volts | 12 |
| Oil capacity | 11 qts (10.4 L) |
| Drawbar (claimed) | 80.7 hp (60.2 kW) |
| Drawbar (tested) | 79.71 hp (59.4 kW) |
| PTO (claimed) | 90 hp (67.1 kW) |
| PTO (tested) | 90.46 hp (67.5 kW) |
Transmission
| Clutch | 304.8mm cerametallic disc |
|---|---|
| Gears | 16 forward and 8 reverse |
| Oil capacity | 90 qts (85.2 L) |
| Transmission type | 16-speed partial power shift |
| Type | partial power shift |
Mechanical
| Cab | Cab standard with heat and air-conditioning. Optional burgundy or western finish interiors. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | rear |
| Drive type | Two- or four-wheel drive |
| Final drives | bull gear |
Capacity
| Fuel | 50 gal (189.2 L) |
|---|---|
| Hydraulic system | 22.5 gal (85.2 L) |
Hydraulics
| Capacity | 22.5 gal (85.2 L) |
|---|---|
| Pump flow | 15 gpm (56.8 lpm) |
| Steering flow | 12 gpm (45.4 lpm) |
| Total flow | 27 gpm (102.2 lpm) |
| Type | open center |
| Valves | 2 or 3 |
Hitch
| Control | draft sensing |
|---|---|
| Rear Type | II |
PTO
| Engine RPM | 540@2100 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Battery volts | 12 |
|---|---|
| Ground | negative |
Dimensions & Tires
| Ground clearance | 13 inches (33 cm) |
|---|---|
| Height (cab) | 112 inches (284 cm) |
| Length | 184 inches (467 cm) |
| Operating weight | 11760 lbs (5334 kg) |
| Rear axle | 3.25 by 104 inches (82 by 2641 mm) / 3.25 by 118 inches (82 by 2997 mm) |
| Shipping weight | 11100 lbs (5034 kg) |
| Wheelbase | 105 inches (266 cm) |
| Width | 102 inches*Width at minimum tread. (259 cm) |
| Front tire | 9.5L-15 |
| Rear tire | 18.4-34 |
| Weight | 11100 to 11760 pounds |
| Wheelbase | 105 inches (266 cm) |
| Ag front | 9.5L-15 |
| Ag rear | 18.4-34 |
3288 Serial Numbers
| 1981 | 501 |
|---|---|
| 1982 | 1063 |
| 1983 | 1286 |
| 1984 | 1464 |
| 1985 | 1651 |
| Description | FAQ: How to read a serial number table. |
| Location: | Serial number plate on the right side of the tractor frame, ahead of the rear axle. |
Nebraska Tractor Test 1438
| Description | Diesel 16-speed 2WDJune 4 - 11, 1982Link: Nebraska Tractor Test 1438 file / PTO performance / Drawbar performance |
|---|---|
| Fuel use | 6.1 gal/hour (23.1 l/hour) / 5.5 gal/hour (20.8 l/hour) / 6.1 gal/hour (23.1 l/hour) |
| Max power | 79.71 hp (59.4 kW) |
| Max pull | 11486 lbs (5210 kg) |
| Power at rated engine speed | 90.46 hp (67.5 kW) |
| Power at rated PTO speed | 88.33 hp (65.9 kW) |
References
| Description | Buyer's Guide 1982 published by International Harvester / International 30 Series Tractors published by International Harvester / Operator's Manual 3088, 3288, 3488-Hydro and 3688 Tractors (1258513C1) published in 1981 / Tractors 90 & 110 HP published in 1981, by International Harvester / 3288 and 3688 Product Guide published in 1981, by International Harvester |
|---|
Speeds
| Description | With 18.4-34R1 rear tires. |
|---|