International Harvester 484 Specs ( 1977-1982 )
Production
| Description | Utility tractor / Built in Doncaster, England / Original price was $11,800 in 1984 |
|---|---|
| Manufacturer | International Harvester |
Engine
| Engine type | International Harvester 2.9L 3-cyl diesel |
|---|---|
| Air cleaner | dry |
| Bore/Stroke | 3.875x5.0625 inches (98 x 129 mm) |
| Coolant capacity | 12 qts (11.4 L) |
| Description | International Harvester D-179 / diesel / 3-cylinder / liquid-cooled |
| Displacement | 179 ci (2.9 L) |
| Idle RPM | 700-2400 |
| Oil capacity | 6.8 qts (6.4 L) |
| Power | 50 hp (37.3 kW) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Drawbar (claimed) | 38 hp (28.3 kW) |
| Drawbar (tested) | 36 hp (26.8 kW) |
| PTO (claimed) | 42.4 hp (31.6 kW) |
| PTO (tested) | 42.42 hp (31.6 kW) |
Transmission
| Clutch | dry disc |
|---|---|
| Description | Four synchronized gears in high, low, and reverse ranges. |
| Gears | 8 forward and 4 reverse |
| Oil capacity | 36 qts (34.1 L) |
| Transmission type | 8-speed syncromesh |
| Type | syncromesh |
Mechanical
| Description | Power steering / Independent hydraulic wet disc brakes / Two-post fixed ROPS. Canopy optional. |
|---|---|
| Drive type | Two-wheel drive |
Capacity
| Fuel | 20 gal (75.7 L) |
|---|---|
| Hydraulic system | 9 gal (34.1 L) |
Hydraulics
| Capacity | 9 gal (34.1 L) |
|---|---|
| Total flow | 15.4 gpm (58.3 lpm) |
| Type | open center |
| Valves | 0 to 2 |
Hitch
| Control | position and draft control |
|---|---|
| Rear lift | 3100 lbs (1406 kg) |
| Rear Type | II |
PTO
| Clutch | hydraulic wet disc |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540 |
Electrical
| Battery volts | 12 |
|---|---|
| Ground | negative |
Dimensions & Tires
| Low-profile Ground clearance | 10.7 inches (27 cm) |
|---|---|
| Low-profile Height (steering wheel) | 56.5 inches (143 cm) |
| Low-profile Length | 138.3 inches (351 cm) |
| Low-profile Shipping weight | 5140 lbs (2331 kg) |
| Low-profile Wheelbase | 78.25 inches (198 cm) |
| Low-profile Width | 78.5 inches (199 cm) |
| Utility Ground clearance | 15.75 inches (40 cm) |
| Utility Height (steering wheel) | 61 inches (154 cm) |
| Utility Length | 133.7 inches (339 cm) |
| Utility Shipping weight | 5200 lbs (2358 kg) |
| Utility Wheelbase | 79 inches (200 cm) |
| Utility Width | 70.4 inches (178 cm) |
| Front tire | 6.00-16 |
| Low-profile Wheelbase | 78.25 inches (198 cm) |
| Rear tire | 13.6-28 |
| Utility Wheelbase | 79 inches (200 cm) |
| Weight | 5140 to 5200 pounds |
| Ag front | 6.00-16 |
| Ag rear | 13.6-28 |
484 Serial Number Location
| Description | Serial number plate on the right side of the frame, above the front axle. |
|---|
484 Serial Numbers
| 1978 | 501 |
|---|---|
| 1979 | 1325 |
| 1980 | 2754 |
| 1981 | 5619 |
| 1982 | unk |
| 1983 | unk |
| 1984 | 9165 |
| Description | FAQ: How to read a serial number table. |
Nebraska Tractor Test 1312
| Description | Diesel 8-speed 2WDMay 22 - 31, 1979Link: Nebraska Tractor Test 1312 file / PTO performance / Drawbar performance / Gear 1H used for power test. / Gear 2L used for pull test. |
|---|---|
| Fuel use | 2.9 gal/hour (11.0 l/hour) / 2.8 gal/hour (10.6 l/hour) / 2.8 gal/hour (10.6 l/hour) |
| Max power | 36 hp (26.8 kW) |
| Max pull | 5500 lbs (2494 kg) |
| Power at rated engine speed | 42.42 hp (31.6 kW) |
| Power at rated PTO speed | 41.79 hp (31.2 kW) |
References
| Description | 1985 Farm Equipment Buyer's Guide published by CaseIH / 1979 Buyer's Guide published by International Harvester / Buyer's Guide 1981 published by International Harvester / International 30 Series Tractors published by International Harvester / 84 Series Hi-Performers published in 1978, by International Harvester / International Series 84 Utility/Row-Crop Tractors published in 1978, by International Harvester / International Series 84 Tractors published in 1983, by International Harvester / Agricultural Equipment Reference Catalog published in 1980, by International Harvester |
|---|
Speeds
| Description | With 13.6-28 rear tires. |
|---|