International Harvester 485 Specs ( 1981-1985 )

Compare Tractor

Production

Description Utility tractor / Built in Doncaster, England
Manufacturer International Harvester

Engine

Engine type International Harvester 2.9L 3-cyl diesel
Fuel tank 29.6 gal (112.0 L)
Bore/Stroke 3.875x5.0625 inches (98 x 129 mm)
Description International Harvester D-179 / diesel / 3-cylinder / liquid-cooled
Displacement 179 ci (2.9 L)
Fuel system direct injection
Power (gross) 53.6 hp (40.0 kW)
Power (net) 52 hp (38.8 kW)
Rated RPM 2180
Starter electric
Starter volts 12
Torque 140.4 lb-ft (190.4 Nm)
Torque RPM 1400
Engine (gross) 53.6 hp (40.0 kW)
Engine (net) 52 hp (38.8 kW)
PTO (claimed) 46.5 hp (34.7 kW)

Transmission

Description Four gears (1-4) in two ranges (low/high) plus reverse range.
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Transmission Torque Amplifier
Type synchromesh / two-speed power shift
Transmission type 8-speed synchromesh / 16-speed two-speed power shift
Transmission type 8-speed synchromesh / 16-speed two-speed power shift

Mechanical

Description Power steering / Hydraulic wet disc brakes / Economy cab standard.
Differential lock mechanical rear
Drive type Two-wheel drive

Hydraulics

Pump flow 12.4 gpm (46.9 lpm)

Hitch

Control position and draft control
Rear lift 3704 lbs (1680 kg)
Rear Type II/I

PTO

Clutch hydraulic wet disc
Rear PTO independent
Rear PTO Type 540

Dimensions & Tires

Height 99.21 inches (251 cm)
Weight 5622 lbs (2550 kg)
Wheelbase 84.65 inches (215 cm)
Front tire 7.50-16
Rear tire 12.4-36
Weight 5622 lbs (2550 kg)
Wheelbase 84.65 inches (215 cm)
Ag front 7.50-16
Ag rear 12.4-36

485 Serial Numbers

Location: Serial number plate on right front of tractor frame, above the front axle.

References

Description Field Force published in 1981, by International Harvester / 85 Series published in 1981, by International Harvester / 85 Series published by International Harvester