International Harvester 5088 Specs ( 1981-1985 )
Production
| Description | Row-Crop tractor / Built in Rock Island, Illinois, USA / Original price was $54,300 in 1985 |
|---|---|
| Manufacturer | International Harvester |
| Total built | 8,176 |
Engine
| Engine type | International Harvester 7.1L 6-cyl diesel |
|---|---|
| Bore/Stroke | 4.30x5.00 inches (109 x 127 mm) |
| Coolant capacity | 29 qts (27.4 L) |
| Description | International Harvester DT-436B / turbocharged diesel / 6-cylinder / liquid-cooled inline |
| Displacement | 436 ci (7.1 L) |
| Idle RPM | 900-2655 |
| Oil capacity | 20 qts (18.9 L) |
| Rated RPM | 2400 |
| Starter volts | 12 |
| Drawbar (claimed) | 119 hp (88.7 kW) |
| Drawbar (tested) | 116.19 hp (86.6 kW) |
| PTO (claimed) | 135 hp (100.7 kW) |
| PTO (tested) | 136.12 hp (101.5 kW) |
Transmission
| Description | Left lever selects gear, right lever selects high, medium, low, or reverse range. Clutch-free on-the-move power shift in gear pairs 1/2, 3/4, and 5/6. Synchronized on-the-move shifting (with the clutch) between pairs. |
|---|---|
| Gears | 18 forward and 6 reverse |
| Oil capacity | 174 qts (164.7 L) |
| Transmission | Synchro Tri-Six (STS) |
| Transmission type | 18-speed partial power shift |
| Type | partial power shift |
Mechanical
| Cab | Cab standard with heat and air-conditioning. Optional burgundy or western interior finish. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | mechanical rear |
| Drive type | Two- or four-wheel drive |
| Final drives | planetary |
Capacity
| Fuel | 70 gal (264.9 L) |
|---|---|
| Hydraulic system | 43.5 gal (164.6 L) |
Hydraulics
| Capacity | 43.5 gal (164.6 L) |
|---|---|
| Pump flow | 25 gpm (94.6 lpm) |
| Steering flow | 12 gpm (45.4 lpm) |
| Total flow | 67 gpm (253.6 lpm) |
| Type | closed center |
| Valves | 2 |
Hitch
| Rear lift | 6990 lbs (3170 kg) |
|---|---|
| Rear Type | III |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540/1000 |
Electrical
| Battery volts | 12 |
|---|---|
| Ground | negative |
Dimensions & Tires
| Bar rear axle | 3.50 by 112 inches (88 by 2844 mm) |
|---|---|
| Front tread | 60 to 84 inches (152 to 213 cm) |
| Ground clearance | 17.2 inches (43 cm) |
| Height | 115 inches (292 cm) |
| Length | 196.6 inches (499 cm) |
| Wheelbase | 111.6 inches (283 cm) |
| Width | 112 inches (284 cm) |
| Front tire | 10.00-16 |
| Rear tire | 18.4-38 |
| Weight | 13765 to 16010 pounds |
| Wheelbase | 111.6 inches (283 cm) |
| Ag front | 10.00-16 |
| Ag rear | 18.4-38 |
5088 Serial Number Location
| Description | Right side of tractor frame |
|---|
5088 Serial Numbers
| 1981 | 501 |
|---|---|
| 1982 | 3551 |
| 1983 | 6015 |
| 1984 | 7307 |
| 1985 | 8623 |
| Description | FAQ: How to read a serial number table. |
International Harvester 5088 Weight
| 2WD Shipping | 13765 lbs (6243 kg) |
|---|---|
| 4WD Shipping | 15208 lbs (6898 kg) |
| Operating | 16010 lbs (7262 kg) |
Nebraska Tractor Test 1419
| Description | Diesel 18-speed 2WDNovember 12 - December 8, 1981Link: Nebraska Tractor Test 1419 file / PTO performance / Drawbar performance |
|---|---|
| Fuel use | 8.9 gal/hour (33.7 l/hour) / 8.8 gal/hour (33.3 l/hour) |
| Max power | 116.19 hp (86.6 kW) |
| Max pull | 14,960 lbs (6785 kg) |
| Power at rated engine speed | 136.12 hp (101.5 kW) |
References
| Description | Buyer's Guide 1982 published by International Harvester / The New Number One! - Tractors 135/160/185 HP published in 1981, by International Harvester / 50 Series Tractors published in 1985, by International Harvester |
|---|
Speeds
| Description | With 18.4-38 rear tires. |
|---|