International Harvester 7288 Specs

Compare Tractor

Overview

The International Harvester 7288 is a high-performance 4WD farm tractor powered by a 210 hp intercooled turbocharged diesel engine and a versatile 18-speed partial power shift transmission. This articulated model features a robust closed-center hydraulic system with an 86 gpm total flow and was manufactured in a limited production run of only 19 units.

Ideal Applications

Heavy-Duty Field Tillage: With 210 engine horsepower, 4WD traction, and an 18-speed Tri-Six transmission, this tractor is engineered for high-draft field applications requiring consistent power delivery.
High-Flow Hydraulic Implement Operation: The closed-center hydraulic system's 86 gpm total flow and availability of up to four rear valves make it capable of powering demanding modern hydraulic attachments.
Large-Scale Planting and Seeding: Utilizing a Category III/II rear hitch with an 8340 lb lift capacity and independent 1000 RPM PTO, this tractor efficiently manages heavy mounted implements and high-capacity seeding equipment.

Production

Description Built in Rock Island, Illinois, USA
Drive type Four-wheel Drive (4WD) tractor
Manufacturer International Harvester
Total built 19

Engine

Engine type International Harvester 7.6L 6-cyl diesel
Air cleaner dual-stage dry
Bore/Stroke 4.30x5.35 inches (109 x 136 mm)
Coolant capacity 36 qts (34.1 L)
Description International Harvester DTI-466C / intercooled turbocharged diesel / 6-cylinder / liquid-cooled
Displacement 466 ci (7.6 L)
Idle RPM 880-2640
Oil capacity 20 qts (18.9 L)
Power 210 hp (156.6 kW)
Pre-heating ether injection
Rated RPM 2400
Starter electric
Starter volts 12
PTO (claimed) 175 hp (130.5 kW)

Transmission

Clutch hydraulic wet disc
Description The Synchro Tri-Six provides six gears with high, medium, low, and reverse ranges. A power shift exists with gear pairs (1/2, 3/4, 5/6) then the clutch needed to shift between pairs.
Gears 18 forward and 6 reverse
Oil capacity 172 qts (162.8 L)
Transmission Tri-Six
Transmission type 18-speed partial power shift
Type partial power shift

Mechanical

Cab Cab standard with air-conditioning.
Description Articulated power steering / Hydraulic wet disc brakes
Differential lock hydraulic
Drive type Four-wheel drive

Capacity

Fuel 89 gal (336.9 L)
Hydraulic system 43 gal (162.8 L)

Hydraulics

Capacity 43 gal (162.8 L)
Pump flow 28 gpm (106.0 lpm)
Rear valves 2 to 4
Steering flow 12 gpm (45.4 lpm)
Total flow 86 gpm (325.5 lpm)
Type closed center

Hitch

Control position and draft control
Rear lift 8340 lbs (3783 kg)
Rear Type III/II

PTO

Rear PTO independent
Rear PTO Type 1000

Electrical

Battery volts 12
Charging system alternator
Ground negative

Dimensions & Tires

Bar rear axle 4 inch diameter (101 mm)
Clearance (drawbar) 17.5 inches (44 cm)
Clearance (front axle) 20.5 inches (52 cm)
Front axle Bar: 4 inch diameter (101 mm)
Height (exhaust) 128.9 inches (327 cm)
Length 239.1 inches (607 cm)
Shipping weight 19750 lbs (8958 kg)
Wheelbase 115.5 inches (293 cm)
Width 112 inches (284 cm)
Front tire 20.8-38
Rear tire 20.8-38
Weight 19750 lbs (8958 kg)
Wheelbase 115.5 inches (293 cm)
Ag front 20.8-38
Ag rear 20.8-38

References

Description New Super 70 Series published in 1985, by International Harvester / Agricultural Equipment Reference Catalog published in 1985, by International Harvester
Drive type Super 70 4-Wheel Drive Tractors published in 1985, by International Harvester