International Harvester 785 Specs ( 1981-1985 )

Compare Tractor

Production

Description Utility tractor / Built in Doncaster, England
Manufacturer International Harvester

Engine

Engine type International Harvester 4.0L 4-cyl diesel
Fuel tank 29.6 gal (112.0 L)
Bore/Stroke 3.94x5.06 inches (100 x 129 mm)
Description International Harvester D-246 / diesel / 4-cylinder / liquid-cooled
Displacement 246 ci (4.0 L)
Fuel system direct injection
Power (gross) 80 hp (59.7 kW)
Power (net) 77.4 hp (57.7 kW)
Rated RPM 2300
Starter electric
Starter volts 12
Torque 263 lb-ft (356.6 Nm)
Torque RPM 1600
Engine (gross) 80 hp (59.7 kW)
Engine (net) 77.4 hp (57.7 kW)
PTO (claimed) 68.3 hp (50.9 kW)

Transmission

Description Four gears (1-4) in two ranges (low/high) plus reverse range.
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Transmission Torque Amplifier
Type synchromesh / two-speed power shift
Transmission type 8-speed synchromesh / 16-speed two-speed power shift
Transmission type 8-speed synchromesh / 16-speed two-speed power shift

Mechanical

Cab Cab standard. Economy and Deluxe cabs available.
Description Power steering / Hydraulic wet disc brakes
Differential lock mechanical rear
Drive type Two- or four-wheel drive

Hydraulics

Pump flow 12.4 gpm (46.9 lpm)

Hitch

Control position and draft control
Rear lift 4400 lbs (1995 kg)
Rear Type II

PTO

Clutch hydraulic wet disc
Rear PTO independent
Rear PTO Type 540/1000

Electrical

Ground negative

Dimensions & Tires

Height 104 inches (264 cm)
Length 147.6 inches (374 cm)
Wheelbase 88.19 inches (224 cm)
Front tire 10.00-16
Rear tire 16.9-34
Wheelbase 88.19 inches (224 cm)
2WD Ag front 10.00-16
4WD Ag front 12.4-24
Ag rear 16.9-34

785 Serial Numbers

Location: Serial number plate on right front of tractor frame, above the front axle.

References

Description Field Force published in 1981, by International Harvester / 85 Series published in 1981, by International Harvester / 85 Series published by International Harvester