International Harvester Cub Lo-Boy Specs ( 1955-1968 )
Production
| Description | Utility tractor / Built in Louisville, Kentucky, USA / The Cub Lo-Boy is very similar to the standard Cub. The Lo-Boy using shorter front end spindles and rotating the final drive made the Lo-Boy about 8 inches shorter than the standard Cub. Both the standard Cub and the Lo-Boy had the IH "Cultivision" offset engine and steering. |
|---|---|
| Manufacturer | International Harvester |
Engine
| Engine type | International Harvester 1.0L 4-cyl gasoline |
|---|---|
| Fuel tank | 7.5 gal (28.4 L) |
| Bore/Stroke | 2.625x2.75 inches (67 x 70 mm) |
| Coolant capacity | 9.75 qts (9.2 L) |
| Description | International Harvester C60 / gasoline / 4-cylinder / liquid-cooled |
| Displacement | 59.5 ci (1.0 L) |
| Exhaust valve clearance | 0.013 inches (cold) (0.330 mm) |
| Firing order | 1-3-4-2 |
| Intake valve clearance | 0.013 inches (cold) (0.330 mm) |
| Oil capacity | 3 qts (2.8 L) |
| Power | 13.4 hp (10.0 kW) |
| Rated RPM | 1800 |
| Sparkplug gap | 0.023 inches (0.584 mm) |
| Starter volts | 6 (early) |
| Belt (claimed) | 9.76 hp (7.3 kW) |
| Drawbar (claimed) | 10 hp (7.5 kW) |
| Plows | 1 (12 inch) |
| PTO (claimed) | 11 hp (8.2 kW) |
Transmission
| Clutch | dry disc |
|---|---|
| Gears | 3 forward and 1 reverse |
| Transmission type | 3-speed sliding gear |
| Type | sliding gear |
Mechanical
| Cab | Open operator station. |
|---|---|
| Description | Manual steering |
| Drive type | Two-wheel drive |
| Final drives | bull gear |
Hydraulics
| Pressure | 1200 psi (82.7 bar) |
|---|---|
| Pump flow | 2.8 gpm (10.6 lpm) |
| Type | open center |
Hitch
| Type | IH Fast Hitch OptOptional |
|---|
PTO
| Engine RPM | -1800@1800 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | Cub-10 (0.9375) |
Electrical
| Battery volts | 6 (early) |
|---|---|
| Ground | positive (early) |
Dimensions & Tires
| Clearance (front axle) | 14 inches (35 cm) |
|---|---|
| Clearance (rear axle) | 14 inches (35 cm) |
| Front tread | 43 to 55 inches (109 to 139 cm) |
| Height (steering wheel) | 56.25 inches (142 cm) |
| Length | 92 inches (233 cm) |
| Rear axle | 1.56 inch diameter (39 mm) |
| Rear tread | 40 to 56 inches (101 to 142 cm) |
| Weight | 1620 lbs (734 kg) |
| Wheelbase | 62 inches (157 cm) |
| Width | 48.25 inches*Width at minimum tread. (122 cm) |
| Front tire | 4.00-12 |
| Rear tire | 8.3-24 |
| Weight | 1620 lbs (734 kg) |
| Wheelbase | 62 inches (157 cm) |
| Ag front | 4.00-12 |
| Ag rear | 8.3-24 |
Cub Lo-Boy Serial Number Location
| Description | Steering gear housing on right side |
|---|
Cub Lo-Boy Serial Numbers
| 1955 | 501 |
|---|---|
| 1956 | 2555 |
| 1957 | 3929 |
| 1958 | 6582 |
| 1959 | 10567 |
| 1960 | 12371 |
| 1961 | 13904 |
| 1962 | 15506 |
| 1963 | 16440 |
| 1964 | 17927 |
| 1965 | 19406 |
| 1966 | 21176 |
| 1967 | 23115 |
| 1968 | 24481 |
| Description | FAQ: How to read a serial number table. |
| Final | 26007 |
International Harvester Cub Lo-Boy attachments
| Description | front-end loader |
|---|
Links
| Description | FarmallCub.com: Information, photos, and a message board |
|---|
References
| Description | Buyers Guide International Industrial Tractors & Equipment published in 1960, by International Harvester / Industrial Tractors and matched equipment published in 1960, by International Harvester / Industrial Tractors & Equipment Buyers Guide published in 1962, by International Harvester / Farm Loaders published in 1962, by International Harvester / Farm Loaders published in 1970, by International Harvester / Spring 1968 Buyer's Guide published by International Harvester / Summer-Fall 1968 Buyer's Guide published by International Harvester / Cub Lo-Boy and Cub Tractors published in 1966, by International Harvester / Cub Lo-Boy Tractor published by International Harvester / International Cub and Cub Lo-Boy Tractors (1 014 031 R3) published in 1959 / International Cub and Cub Lo-Boy Tractors (1 014 488 R4) published in 1965 / International Cub and Cub Lo-Boy Tractors (1 014 488 R8) published in 1975 |
|---|