International Harvester Hydro 186 Specs ( 1976-1981 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Rock Island, Illinois, USA
Manufacturer International Harvester
Original price $33,900 (1981)

Engine

Engine type International Harvester 7.1L 6-cyl diesel
Air cleaner dual dry element
Bore/Stroke 4.30x5.00 inches (109 x 127 mm)
Coolant capacity 26 qts (24.6 L)
Description International Harvester D436 / diesel / 6-cylinder / liquid-cooled
Displacement 436 ci (7.1 L)
Rated RPM 2400
Oil capacity 14 qts (13.2 L)
Drawbar (claimed) 82 hp (61.1 kW)
Drawbar (tested) 79.83 hp (59.5 kW)
PTO (claimed) 104 hp (77.6 kW)
PTO (tested) 105.02 hp (78.3 kW)

Transmission

Description A range lever on the right console allows the selection of high, low, or reverse range. Speed is controlled by the speed-control lever on the left side of the instrument panel. An inching pedal is located on the left side of the tractor, and allows for small movements when connecting implements.
Gears variable, two-range forward and reverse
Oil capacity 114 qts (107.9 L)
Oil type IH Hy-Tran/B-6
Transmission hydrostatic

Mechanical

Cab Cab standard with air-conditioning. Open operator station and four-post ROPS available.
Description Hydraulic disc brakes
Drive type Two- or four-wheel drive
Final drives bull gear
Steering power assist

Capacity

Fuel 50 gal (189.2 L)
Hydraulic system 28.5 gal (107.9 L)

Hydraulics

Capacity 28.5 gal (107.9 L)
Pump flow 12 gpm (45.4 lpm)
Type open center
Valves 2

Hitch

Rear lift (at 24"/610mm) 6660 lbs (3020 kg)
Rear Type II

PTO

Engine RPM 540@2100
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2
Battery CCA 470
Battery volts 12
Charging amps 42
Charging system alternator
Ground negative

Dimensions & Tires

Ground clearance 13 inches (33 cm)
Height (cab) 112 inches (284 cm)
Length 167 inches (2WD) (424 cm)
Wheelbase 105 inches (266 cm)
Width 102 inches (259 cm)
Front tire 10.00-16
Rear tire 18.4-34
Weight 11500 to 13135 pounds
Wheelbase 105 inches (266 cm)
Ag front 10.00-16
Ag rear 18.4-34

Hydro 186 Serial Numbers

1976 8601
1977 8813
1978 9806
1979 10626
1980 11465
1981 12279
Description FAQ: How to read a serial number table.
Location: Rear axle.

International Harvester Hydro 186 Weight

Operating 13,135 lbs (5958 kg)
Shipping 11,500 lbs (5216 kg)

Nebraska Tractor Test 1257

Description Diesel hydrostatic 2WDSeptember 22 - October 3, 1977Link: Nebraska Tractor Test 1257 file / PTO performance / Drawbar performance / Pull at 9.6 KPH / Pull at 3.9 KPH
Fuel use 8.1 gal/hour (30.7 l/hour) / 7.3 gal/hour (27.6 l/hour) / 8.1 gal/hour (30.7 l/hour)
Max power 79.83 hp (59.5 kW)
Max pull 11312 lbs (5131 kg)
Power at rated engine speed 105.02 hp (78.3 kW)
Power at rated PTO speed 100.31 hp (74.8 kW)

References

Description 1978 Buyer's Guide published by International Harvester / 1979 Buyer's Guide published by International Harvester / Buyer's Guide 1981 published by International Harvester / Series 86 Tractors published in 1976, by International Harvester / 86 Series Tractors - The pro-ag line published in 1976, by International Harvester / Operator's Manual 786, 886, 986, 1086, 1486, 1586 and Hydro-186 Tractors (1096207R4) published in 1986

Speeds

Description 18.4-34 rear tires.

Variants

Hydro 186 Hi-Clear high clearance