John Deere 1026R Specs ( 2011-2012 )
Production
| Description | Sub-Compact Utility tractor / Built in Augusta, Georgia, USA |
|---|---|
| Manufacturer | John Deere |
Engine
| Description | Image courtesy of Doug Easterlund |
|---|---|
| Engine type | Yanmar 1.1L 3-cyl diesel |
| Air cleaner | dual stage dry |
| Bore/Stroke | 2.9x3.2 inches (74 x 81 mm) |
| Compression | 23.5:1 |
| Coolant capacity | 3.9 qts (3.7 L) |
| Coolant change | 2000 h |
| Description | Yanmar 3TNV76 / diesel / 3-cylinder / liquid-cooled |
| Displacement | 68.1 ci (1.1 L) |
| Emissions | Interim Tier IV |
| Firing order | 1-3-2 |
| Fuel system | indirect injection |
| Operating RPM | 1400-3370 |
| Pre-heating | glow plugs |
| Rated Power (gross) | 25.2 hp (18.8 kW) |
| Rated Power (net) | 23.8 hp (17.7 kW) |
| Rated RPM | 3200 |
| Starter | electric |
| Starter volts | 12 |
| Oil capacity | 2.9 qts (2.7 L) |
| Oil change | 200 h |
| Engine (gross) | 25.2 hp (18.8 kW) |
| Engine (net) | 23.8 hp (17.7 kW) |
| PTO (claimed) | 18 hp (13.4 kW) |
Transmission
| Description | hydrostatic |
|---|---|
| Gears | infinite forward and reverse (2-range) |
| Oil capacity | 13 qts (12.3 L) |
| Oil type | JD Hy-Gard |
| Type | hydrostatic |
Mechanical
| Description | Power steering / Disc brakes / Two-post ROPS. |
|---|---|
| Differential lock | standard |
| Drive type | Four-wheel drive |
| Final drives | spur gear |
Capacity
| Fuel | 5.6 gal (21.2 L) |
|---|---|
| Hydraulic system | 3.25 gal (12.3 L) |
Hydraulics
| Capacity | 3.25 gal (12.3 L) |
|---|---|
| Pressure | 2000 psi (137.9 bar) |
| Total flow | 6.3 gpm (23.8 lpm) |
| Type | open center |
| Valves | 2 to 3 |
Hitch
| Control | position control |
|---|---|
| Rear lift (at 24"/610mm) | 681 lbs (308 kg) |
| Rear lift (at ends) | 1433 lbs (650 kg) |
| Rear Type | Limited I |
PTO
| Engine RPM | 540@3200 / 2100@3200 |
|---|---|
| Mid PTO | independent |
| Mid PTO Type | 2100 |
| Rear PTO | independent |
| Rear PTO Type | 540 |
Electrical
| Battery CCA | 500 |
|---|---|
| Battery volts | 12 |
| Charging amps | 40 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (front axle) | 12.3 inches (31 cm) |
|---|---|
| Description | Flanged rear axle |
| Front tread | 32.2 inches (81 cm) |
| Height (hood) | 41.5 inches (105 cm) |
| Height (ROPS) | 78.6 inches (199 cm) |
| Length | 87.6 inches (222 cm) |
| Rear tread | 35.2 inches (89 cm) |
| Wheelbase | 57.1 inches (145 cm) |
| Width | 47.2 inches (R3 tires) (119 cm) |
| Weight | 1444 lbs (654 kg) |
| Wheelbase | 57.1 inches (145 cm) |
| Industrial front | 18x8.5-10 |
| Industrial rear | 26x12.00-12 |
| Lawn/turf front | 18x8.5-10 |
| Lawn/turf rear | 26x12.00-12 |
1026R Serial Number Location
| Description | Serial number plate on the right side of main tractor frame above the front axle. |
|---|
1026R Serial Numbers
| 2011 | 110001 |
|---|---|
| 2012 | 210001 |
| 2013 | 310001 |
| Description | FAQ: How to read a serial number table. |
| Location: | Serial number plate on the right side of main tractor frame above the front axle. |
John Deere 1026R Weight
| Max front axle | 1349 lbs (611 kg) |
|---|---|
| Max rear axle | 1576 lbs (714 kg) |
| Operating | 1444 lbs (654 kg) |
John Deere 1026R attachments
| Description | 137 cm mid-mount mower deck / 152 cm mid-mount mower deck / front-end loader |
|---|
References
| Description | Compact Utility Tractors published in 2016, by John Deere |
|---|
Speeds
| Description | With 26x12.00-12 R4 rear tires. |
|---|