John Deere 2210 Specs ( 2003-2006 )
Production
| Description | Sub-Compact Utility tractor / Built in Augusta, Georgia, USA |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | Yanmar 1.0L 3-cyl diesel |
|---|---|
| Air cleaner | dry |
| Bore/Stroke | 2.91x3.07 inches (74 x 78 mm) |
| Compression | 23.5:1 |
| Coolant capacity | 3.1 qts (2.9 L) |
| Description | Yanmar 3TNE74 / diesel / 3-cylinder / liquid-cooled |
| Displacement | 61.4 ci (1.0 L) |
| Fuel system | indirect injection |
| Oil capacity | 2.1 qts (2.0 L) |
| Power (gross) | 23 hp (17.2 kW) |
| Power (net) | 22.5 hp (16.8 kW) |
| Pre-heating | coolant heater OptOptional |
| Rated RPM | 3000 |
| Starter | electric |
| Starter power | 1.5 hp (1.1 kW) |
| Starter volts | 12 |
| Engine (gross) | 23 hp (17.2 kW) |
| Engine (net) | 22.5 hp (16.8 kW) |
| PTO (claimed) | 17.7 hp (13.2 kW) |
Transmission
| Description | hydrostatic |
|---|---|
| Gears | infinite forward and reverse (2-range) |
| Oil capacity | 13.6 qts (12.9 L) |
| Type | hydrostatic |
Mechanical
| Description | Power steering / Two-post fixed ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
| Final drives | spur gear |
Capacity
| Fuel | 5 gal (18.9 L) |
|---|---|
| Hydraulic system | 3.4 gal (12.9 L) |
Hydraulics
| Capacity | 3.4 gal (12.9 L) |
|---|---|
| Mid valves | 2 |
| Pressure | 1987 psi (137.0 bar) |
| Pump flow | 3 gpm (11.4 lpm) |
| Steering flow | 2.5 gpm (9.5 lpm) |
| Total flow | 5.5 gpm (20.8 lpm) |
| Type | open center |
Hitch
| Rear lift (at 24"/610mm) | 700 lbs (317 kg) |
|---|---|
| Rear Type | I *Limited |
PTO
| Clutch | hydraulic wet disc / hydraulic wet disc *Mid PTO shared clutch with rear PTO. |
|---|---|
| Engine RPM | 540@2600 / 2100@2600 |
| Mid PTO | independent |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 435 |
|---|---|
| Battery volts | 12 |
| Charging amps | 20 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (front axle) | 7.7 inches (19 cm) |
|---|---|
| Front tread | 31.1 inches (78 cm) |
| Height (hood) | 41.8 inches (106 cm) |
| Height (ROPS) | 78.6 inches (199 cm) |
| Length | 104 inches (264 cm) |
| Rear tread | 35.3 inches (89 cm) |
| Wheelbase | 57 inches (144 cm) |
| Width | 47.9 inches (121 cm) |
| Front tire | 18x8.50-10 |
| Rear tire | 26x12.00-12 |
| Weight | 1400 lbs (635 kg) |
| Wheelbase | 57 inches (144 cm) |
| Ag front | 18x8.50-10 |
| Ag rear | 26x12.00-12 |
| Industrial front | 18x8.50-10 |
| Industrial rear | 26x12.00-12 |
| Lawn/turf front | 18x8.50-10 |
| Lawn/turf rear | 26x12.00-12 |
2210 Serial Number Location
| Description | Right side of main tractor frame, above the front axle. |
|---|
2210 Serial Numbers
| 2003 | 2100001 |
|---|---|
| 2004 | 3100001 |
| 2005 | 4310001 |
| Description | FAQ: How to read a serial number table. |
John Deere 2210 Weight
| Max Drawbar | 562 lbs (254 kg) |
|---|---|
| Max front axle | 750 lbs (340 kg) |
| Max rear axle | 2426 lbs (1100 kg) |
John Deere 2210 attachments
| Description | 54" mid-mount mower deck / 62" mid-mount mower deck / snowblower / blade / front-end loader |
|---|
References
| Description | Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere |
|---|