John Deere 2250 Specs ( 1987-1994 )
Production
| Description | Utility tractor / Built in Mannheim, Baden-Württemberg, Germany |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | John Deere 3.9L 4-cyl diesel |
|---|---|
| Fuel tank | 22.2 gal (84.0 L) |
| Air cleaner | dry |
| Bore/Stroke | 4.19x4.33 inches (106 x 110 mm) |
| Description | John Deere / diesel / 4-cylinder / liquid-cooled |
| Displacement | 239.2 ci (3.9 L) |
| Power | 62 hp (46.2 kW) |
| Rated RPM | 2300 |
| Starter power | 4 hp (3.0 kW) |
| Starter volts | 12 |
Transmission
| Clutch | mechanical disc / hydraulic |
|---|---|
| Gears | 8 forward and 4 reverse / 16 forward and 8 reverse |
| Transmission | Syncro-Range / Hi-Lo |
| Type | two-speed power shift |
| Transmission type | 8-speed / 16-speed two-speed power shift |
| Transmission type | 8-speed / 16-speed two-speed power shift |
Mechanical
| Description | Hydraulic wet disc brakes / ROPS. MC1 or Sound-Gard cab optional. CC2 cab available in 1991. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Two- or four-wheel drive |
| Final drives | planetary |
| Steering | power assist |
Hydraulics
| Pressure | 2756 psi (190.0 bar) |
|---|---|
| Pump flow | 11.6 gpm (43.9 lpm) |
| Type | closed-center constant pressure |
Hitch
| Control | position and draft control |
|---|---|
| Rear lift (at ends) | 6768 lbs (3069 kg) |
| Rear Type | II |
PTO
| Clutch | hydraulic wet disc |
|---|---|
| Engine RPM | 540@2075 |
| Rear PTO | independent |
| Rear PTO Type | 540 |
Electrical
| Batteries | 2 |
|---|---|
| Battery AH | 55 |
| Battery volts | 12 |
| Charging amps | 55 |
| Ground | negative |
Dimensions & Tires
| 2WD Clearance (front axle) | 25.3 inches (64 cm) |
|---|---|
| 2WD Front tread | 53.5 to 79.1 inches (135 to 200 cm) |
| 2WD Wheelbase | 89.2 inches (226 cm) |
| 4WD Clearance (front axle) | 16.3 inches (41 cm) |
| 4WD Front tread | 59.1 to 79.1 inches (150 to 200 cm) |
| 4WD Wheelbase | 90 inches (228 cm) |
| Length | 165.1 inches (419 cm) |
| Rear tread | 59.1 to 78.7 inches (150 to 199 cm) |
| Width | 73.3 inches (186 cm) |
| 2WD MC1 Rear tire | 13.6-36 |
| 2WD Wheelbase | 89.2 inches (226 cm) |
| 4WD Wheelbase | 90 inches (228 cm) |
| Front tire | 7.50-16 |
| Weight | 7077 to 8157 pounds |
| 2WD MC1 Standard tires (ag) | Front: 7.50-16. Rear: 13.6-36 |
| 2WD SG2 Standard tires (ag) | Front: 7.50-18. Rear: 13.6-38 |
| 4WD MC1 Standard tires (ag) | Front: 11.2-24. Rear: 13.6-36 |
| 4WD SG2 Standard tires (ag) | Front: 7.50-18. Rear: 13.6-38 |
John Deere 2250 Height
| Cab | 94.5 inches (low profile) (240 cm) |
|---|
John Deere 2250 Weight
| 2WD MC1 Shipping | 7077 lbs (3210 kg) |
|---|---|
| 2WD SG2 Shipping | 7485 lbs (3395 kg) |
| 4WD MC1 Shipping | 7738 lbs (3509 kg) |
| 4WD SG2 Shipping | 8157 lbs (3700 kg) |
References
| Description | Operator's Manual 2250, 2450 and 2650 Tractors published in 1992, by John Deere / Operator's Manual 2250 and 2450 Tractors published in 1991, by John Deere / 2250 Traktor published in 1986, by John Deere / Traktor 2250 published in 1988, by John Deere |
|---|
Speeds
| Description | With 13.6-36 rear tires. / With 13.6-38 rear tires. |
|---|