John Deere 3025D Specs ( 2019-Present )
Production
| Description | Compact Utility tractor / Built in India / Original price was $16,690 in 2019 |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | Yanmar 1.6L 3-cyl diesel |
|---|---|
| Fuel tank | 9.7 gal (36.7 L) |
| Air cleaner | dual dry element |
| Bore/Stroke | 3.46x3.54 inches (88 x 90 mm) |
| Compression | 19.1:1 |
| Coolant capacity | 5.3 qts (5.0 L) |
| Description | Yanmar 3TNV88F-EPJPT / diesel / 3-cylinder / liquid-cooled inline |
| Displacement | 100.2 ci (1.6 L) |
| Emissions | Tier 4 |
| Fuel system | direct injection |
| Oil capacity | 4.8 qts (4.5 L) |
| Oil change | 400 h |
| Power (gross) | 24.4 hp (18.2 kW) |
| Rated RPM | 2400 |
| Starter | electric |
| Starter power | 1.9 hp (1.4 kW) |
| Starter volts | 12 |
| Engine (gross) | 24.4 hp (18.2 kW) |
| PTO (claimed) | 20.7 hp (15.4 kW) |
Transmission
| Clutch | dry disc |
|---|---|
| Description | Four gears in two ranges with left-hand shuttle. Tractor must be stopped, and clutch used, to shift gear, range, or shuttle. |
| Gears | 8 forward and reverse |
| Oil capacity | 34.8 qts (32.9 L) |
| Transmission type | 8-speed mechanical shuttle |
| Type | mechanical shuttle |
Mechanical
| Description | Power steering / Mechanical wet disc brakes / Two-post folding ROPS. |
|---|---|
| Drive type | Four-wheel drive |
| Final drives | spur gear |
Hydraulics
| Pressure | 2500 psi (172.4 bar) |
|---|---|
| Pump flow | 5.1 gpm (19.3 lpm) |
| Rear valves | 2 OptOptional |
| Steering flow | 3.8 gpm (14.4 lpm) |
| Total flow | 8.9 gpm (33.7 lpm) |
| Type | open center |
Hitch
| Control | position control |
|---|---|
| Rear lift (at 24"/610mm) | 1670 lbs (757 kg) |
| Rear Type | I |
PTO
| Engine RPM | 540@2400 |
|---|---|
| Rear PTO | transmission |
Electrical
| Battery CCA | 600 |
|---|---|
| Battery volts | 12 |
| Charging amps | 55 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (front axle) | 14 inches (35 cm) |
|---|---|
| Clearance (rear axle) | 13 inches (33 cm) |
| Front tread | 41.7 inches (105 cm) |
| Height (steering wheel) | 59.4 inches (150 cm) |
| Length | 111.2 inches (282 cm) |
| Rear tread | 43.3 inches (109 cm) |
| Wheelbase | 62 inches (157 cm) |
| Width | 57.3 inches (145 cm) |
| Front tire | 7-14 |
| Rear tire | 11.2-24 |
| Weight | 2778 lbs (1260 kg) |
| Wheelbase | 62 inches (157 cm) |
| Industrial front | 25x8.5-14 |
| Industrial rear | 15-19.5 |
| Lawn/turf front | 27x8.5-15 |
| Lawn/turf rear | 41x14-20 |
| Standard tires (ag) | Front: 7-14. Rear: 11.2-24 |
3025D Serial Numbers
| Location: | Serial number plate on the left side of the tractor frame, above the front axle. |
|---|
John Deere 3025D Weight
| Max capacity | 4630 lbs (2100 kg) |
|---|---|
| Max front axle | 1940 lbs (879 kg) |
| Max rear axle | 3527 lbs (1599 kg) |
| Shipping | 2778 lbs (1260 kg) |
John Deere 3025D attachments
| Description | front-end loader |
|---|
References
| Description | 3 Series published in 2019, by John Deere / 3 Series published in 2022, by John Deere |
|---|
Speeds
| Description | With 15x19.5 rear tires. Reverse speeds are 5% faster than forward. |
|---|