Home / John Deere / 3130

John Deere 3130 Specs ( 1973-1979 )

Compare Tractor

Production

Description Utility tractor / Built in Mannheim, Baden-Württemberg, Germany / The John Deere 3130 saw a redesign in 1975 at tractor serial number 182150. The front, hood, and decals were changed to a more rounded appearance. The 3130 was sold as the 2840 in the United States.
Manufacturer John Deere

Engine

Engine type John Deere 5.4L 6-cyl diesel
Air cleaner dry
Bore/Stroke 4.02x4.33 inches (102 x 110 mm)
Compression 16.2:1
Coolant capacity 20 qts (18.9 L)
Description John Deere / diesel / 6-cylinder / liquid-cooled / The 3130 engine could be ordered with an optional turbocharger (TA 3401) as an altitude compensator.
Displacement 329 ci (5.4 L)
Fuel system direct injection
Idle RPM 650-2660
Oil capacity 10.9 qts (10.3 L)
Operating RPM 1300-2500
Power (gross) 96.5 hp (72.0 kW)
Power (net) 87.2 hp (65.0 kW)
Rated RPM 2500
Starter electric
Starter volts 12
Torque 218.3 lb-ft (296.0 Nm)
Torque RPM 1300
Engine (gross) 96.5 hp (72.0 kW)
Engine (net) 87.2 hp (65.0 kW)
PTO (claimed) 75.1 hp (56.0 kW)

Transmission

Description Three gears in two ranges, plus reverse range. Two-speed hydraulic high-low shift. / Three gears in two ranges, plus reverse range.
Gears 12 forward and 6 reverse / 6 forward and 3 reverse
Transmission Hi-Lo
Type two-speed power shift / sliding gear
Transmission type 12-speed two-speed power shift / 6-speed sliding gear
Transmission type 12-speed two-speed power shift / 6-speed sliding gear

Mechanical

Cab Open operator station. Cab optional.
Description Power steering / Wet disc brakes
Differential lock mechanical rear
Drive type Two- or four-wheel drive
Final drives planetary

Capacity

Fuel 28 gal (106.0 L)
Hydraulic system 15 gal (56.8 L)

Hydraulics

Capacity 15 gal (56.8 L)
Pump flow 23 gpm (87.1 lpm)
Type closed center

Hitch

Control position control and lower-link draft sensing
Rear lift 7452 lbs (3380 kg)
Rear Type II

PTO

Engine RPM 540@2200
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2
Battery AH 88
Battery volts 12
Charging amps 28
Charging system alternator
Charging volts 14
Ground negative

Dimensions & Tires

Description Flange rear axle / Rack-and-pinion rear axle
Front tread 56.9 to 77 inches (144 to 195 cm)
Height 103.5 inches (262 cm)
Length 157.5 inches (400 cm)
Rear tread 63 to 78.7 inches (flange) (160 to 199 cm) / 63 to 99 inches (rack-and-pinion) (160 to 251 cm)
Weight 8200 lbs (3719 kg)
Wheelbase 96.9 inches (246 cm)
Width 81.8 inches*Minimum width. (207 cm)
2WD Rear tire 18.4-34
Front tire 7.50-18
Weight 8200 lbs (3719 kg)
Wheelbase 96.9 inches (246 cm)
2WD Standard tires (ag) Front: 7.50-18. Rear: 18.4-34 / Front: 7.50-20. Rear: 16.9-38
4WD Standard tires (ag) Front: 12.4-24. Rear: 16.9-38

3130 Serial Number Location

Description Serial number plate on the front-right of the 3130 tractor frame, above front axle.

John Deere 3130 attachments

Description front-end loader

References

Description Tractors 1130, 2030, 2130, 3130 published in 1976, by John Deere / Tractors 40 to 80 hp published in 1978, by John Deere / Product Information Manual published in 1975, by John Deere / Product Information Manual published in 1977, by John Deere

Speeds

Description With 16.9/14-38 rear tires.

Variants

3130LS 12-speed