John Deere 4052M Specs ( 2014-Present )
Production
| Description | Compact Utility tractor / Built in Augusta, Georgia, USA / The 4052M Heavy-Duty uses the same front axle as the 4052R. |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | Yanmar 2.1L 4-cyl diesel |
|---|---|
| Fuel tank | 13 gal (49.2 L) |
| Bore/Stroke | 3.39x3.54 inches (86 x 90 mm) |
| Description | Yanmar 4TNV86 / turbocharged diesel / 4-cylinder / liquid-cooled inline |
| Displacement | 127.5 ci (2.1 L) |
| Emission control | diesel particulate filter (DPF) |
| Emissions | Tier IV |
| Rated Power (gross) | 50.8 hp (37.9 kW) |
| Rated RPM | 2600 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 124 lb-ft (168.1 Nm) |
| Torque RPM | 1690 |
| Engine (gross) | 50.8 hp (37.9 kW) |
| Gear PTO (claimed) | 40.8 hp*Sales brochure lists 42.2 (30.4 kW) |
| Hydro PTO (claimed) | 39.1 hp*Sales brochure lists 41.2 (29.2 kW) |
Transmission
| Clutch | wet disc |
|---|---|
| Gears | 12 forward and reverse / infinite forward and reverse (3-range) |
| Transmission | PowrReverser / eHydro |
| Type | power shuttle / hydrostatic |
| Description | hydrostatic |
| Transmission type | 12-speed power shuttle |
| Description | hydrostatic |
| Transmission type | 12-speed power shuttle |
Mechanical
| Description | Power steering / Hydraulic wet disc brakes / Two-post folding ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
| Final drives | planetary |
Hydraulics
| Pressure | 2500 psi (172.4 bar) |
|---|---|
| Pump flow | 10.2 gpm (38.6 lpm) |
| Steering flow | 5.7 gpm (21.6 lpm) |
| Total flow | 15.9 gpm (60.2 lpm) |
| Type | open center |
Hitch
| Control | position control |
|---|---|
| Rear lift (at 24"/610mm) | 2500 lbs (1134 kg) |
| Rear lift (at ends) | 3130 lbs (1419 kg) |
| Rear Type | I |
PTO
| Engine RPM | 540@2600 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 770 |
|---|---|
| Battery volts | 12 |
| Charging amps | 75 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (front axle) | 13.8 inches (35 cm) |
|---|---|
| Front tread | 53.6 inches (136 cm) |
| Height (cab) | 97.4 inches (247 cm) |
| Height (ROPS) | 100.2 inches (254 cm) |
| Length | 130.6 inches (331 cm) |
| Rear tread | 59.9 inches (152 cm) |
| Weight | 3770 lbs (1710 kg) |
| Wheelbase | 73 inches (185 cm) |
| Front tire | 8.00-16 |
| Rear tire | 13.6-28 |
| Weight | 3770 lbs (1710 kg) |
| Wheelbase | 73 inches (185 cm) |
| Ag front | 8.00-16 |
| Ag rear | 13.6-28 |
| Lawn/turf front | 27x10.50-15 |
| Lawn/turf rear | 44x18-20 |
4052M Serial Number Location
| Description | Serial number plate on the right side of the 4052M tractor frame, above the front axle. |
|---|
John Deere 4052M attachments
| Description | front-end loader / backhoe |
|---|
References
| Description | 4 Family published in 2015, by John Deere / 4 Family published in 2017, by John Deere / 4 Series published in 2020, by John Deere / 4 Series published in 2023, by John Deere / Operator's Manual 4 Series (OMTR11452) published in 2019* / Operator's Manual 4 Series (OMTR130411) published in 2023* / *Publication contains known errors. |
|---|
Variants
| 4052M | base model |
|---|---|
| 4052M HD | heavy-duty front axle |
| 4052R | deluxe model |