John Deere 4110 Specs ( 2002-2006 )
Production
| Description | Compact Utility tractor / Built in Japan |
|---|---|
| Distributor | John Deere |
| Manufacturer | Yanmar |
Engine
| Engine type | Yanmar 1.0L 3-cyl diesel |
|---|---|
| Air cleaner | dry |
| Bore/Stroke | 2.91x3.07 inches (74 x 78 mm) |
| Coolant capacity | 2.5 qts (2.4 L) |
| Description | Yanmar 3TNE74 / diesel / 3-cylinder / liquid-cooled |
| Displacement | 61.4 ci (1.0 L) |
| Power (gross) | 20 hp (14.9 kW) |
| Power (net) | 19 hp (14.2 kW) |
| Rated RPM | 2650 |
| Starter volts | 12 |
| Oil capacity | 2.3 qts (2.2 L) |
| Engine (gross) | 20 hp (14.9 kW) |
| Engine (net) | 19 hp (14.2 kW) |
| PTO (claimed) | 17 hp (12.7 kW) |
Transmission
| 122o↔0oF [50o↔-17oC] | : HY-GARD / : HY-GARD |
|---|---|
| 80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD / : Low-viscosity HY-GARD |
| Description | Unsynchronized four-speed transmission with high, low, and reverse ranges. Tractor must be stopped, and clutch used, to shift ranges and gears. / The 4110 has an optional two-range hydrostatic transmission controlled by forward and reverse foot pedals. The tractor must be stopped to shift between high and low ranges. |
| Gears | 8 forward and 4 reverse / infinite forward and reverse (2-range) |
| Oil capacity | 14.4 qts (13.6 L) / 14 qts (13.2 L) |
| Oil type | 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD ([50o↔-17oC][26o↔-40oC]) / 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD ([50o↔-17oC][26o↔-40oC]) |
| Type | unsynchronized gear / hydrostatic |
| Description | hydrostatic |
| Transmission type | 8-speed unsynchronized gear |
| Description | hydrostatic |
| Transmission type | 8-speed unsynchronized gear |
Mechanical
| Description | Two-post folding ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
| Final drives | spur gear |
| Steering | power |
Capacity
| Front axle | 3.6 qts (3.4 L) |
|---|---|
| Fuel | 5.8 gal (22.0 L) |
| Hydraulic system | 3.6 gal (13.6 L) |
Hydraulics
| Capacity | 3.6 gal (13.6 L) |
|---|---|
| Pump flow | 5.1 gpm (19.3 lpm) |
| Type | open center |
| Valves | 5 |
Hitch
| Rear lift (at 24"/610mm) | 1150 lbs (521 kg) |
|---|---|
| Rear Type | I |
PTO
| Gear Rear PTO | transmission |
|---|---|
| Hydro Rear PTO | independent |
| Mid PTO | indpendent |
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 |
Electrical
| Battery CCA | 435 |
|---|---|
| Battery volts | 12 |
| Charging amps | 20 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Gear Operating weight | 1517 lbs (688 kg) |
|---|---|
| Ground clearance | 9.5 inches (24 cm) |
| Height (hood) | 44 inches (111 cm) |
| Height (ROPS) | 78.9 inches (200 cm) |
| Hydro Operating weight | 1579 lbs (716 kg) |
| Length | 103 inches (261 cm) |
| Wheelbase | 58 inches (147 cm) |
| Width | 47 inches (119 cm) |
| Front tire | 5.00-12 |
| Rear tire | 9.5-16 |
| Weight | 1517 to 1579 pounds |
| Wheelbase | 58 inches (147 cm) |
| Ag front | 5.00-12 |
| Ag rear | 9.5-16 |
| Industrial rear | 12-16.5 |
| Lawn/turf front | 23x8.50-12 |
| Lawn/turf rear | 315/75D-15 |
4110 Serial Numbers
| 2002 | 110000 |
|---|---|
| 2003 | 210000 |
| 2004 | 310000 |
| Description | FAQ: How to read a serial number table. |
John Deere 4110 attachments
| Description | 54" mid-mount mower deck / 60" mid-mount mower deck / front-end loader / backhoe |
|---|
References
| Description | Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 / 4000 TEN Series 18 To 48 HP published in 2001, by John Deere / The New John Deere 4000 TEN Series Tractors published in 2002 / 4000 TEN Series - The tractor redefined published in 2001, by John Deere / 4000 TEN Series Product Information Handbook published in 2003, by John Deere / Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere |
|---|
Speeds
| Description | With 9.5-16 rear tires. / With 9.5-16 rear tires. |
|---|