John Deere 4115 Specs ( 2003-2004 )
Production
| Description | Compact Utility tractor / Built in Japan |
|---|---|
| Distributor | John Deere |
| Manufacturer | Yanmar |
Engine
| Engine type | Yanmar 1.2L 3-cyl diesel |
|---|---|
| Coolant capacity | 2.5 qts (2.4 L) |
| Description | Yanmar 3TNE78A / diesel / 3-cylinder / liquid-cooled |
| Displacement | 73.3 ci (1.2 L) |
| Power (gross) | 24 hp (17.9 kW) |
| Power (net) | 23.5 hp (17.5 kW) |
| Rated RPM | 2650 |
| Starter volts | 12 |
| Oil capacity | 2.1 qts (2.0 L) |
| Engine (gross) | 24 hp (17.9 kW) |
| Engine (net) | 23.5 hp (17.5 kW) |
| PTO (claimed) | 20 hp (14.9 kW) |
Transmission
| 122o↔0oF [50o↔-17oC] | : HY-GARD |
|---|---|
| 80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
| Description | hydrostatic |
| Gears | infinite forward and reverse (2-range) |
| Oil capacity | 15.6 qts (14.8 L) |
| Oil type | 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD ([50o↔-17oC][26o↔-40oC]) |
| Type | hydrostatic |
Mechanical
| Description | ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
| Final drives | spur gear |
| Steering | power |
Capacity
| Front axle | 3.6 qts (3.4 L) |
|---|---|
| Fuel | 7.1 gal (26.9 L) |
| Hydraulic system | 3.9 gal (14.8 L) |
Hydraulics
| Capacity | 3.9 gal (14.8 L) |
|---|---|
| Pump flow | 5.1 gpm (19.3 lpm) |
| Type | open center |
| Valves | 5 |
Hitch
| Rear lift (at 24"/610mm) | 1,150 lbs (521 kg) |
|---|---|
| Rear Type | I |
PTO
| Mid PTO | independent |
|---|---|
| Mid PTO Type | 2100 |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 435 |
|---|---|
| Battery volts | 12 |
| Charging amps | 20 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ground clearance | 11 inches (27 cm) |
|---|---|
| Length | 108 inches (274 cm) |
| Operating weight | 1771 lbs (803 kg) |
| Wheelbase | 64.6 inches (164 cm) |
| Width | 47 inches (119 cm) |
| Front tire | 7.00-12 |
| Rear tire | 35x12.00-16.5 |
| Weight | 1771 lbs (803 kg) |
| Wheelbase | 64.6 inches (164 cm) |
| Ag front | 7.00-12 |
| Ag rear | 35x12.00-16.5 |
| Industrial rear | 12-16.5 |
| Lawn/turf front | 24x8.50-12 |
| Lawn/turf rear | 315/80D-16 |
4115 Serial Numbers
| 2003 | 210000 |
|---|---|
| 2004 | 310000 |
| Description | FAQ: How to read a serial number table. |
John Deere 4115 Height
| Hood | 50 inches (127 cm) |
|---|---|
| ROPS | 81 inches (205 cm) |
John Deere 4115 attachments
| Description | 60" mid-mount mower deck / 72" mid-mount mower deck / front-end loader / backhoe |
|---|
References
| Description | Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 / 4000 TEN Series 18 To 48 HP published in 2001, by John Deere / The New John Deere 4000 TEN Series Tractors published in 2002 / 4000 TEN Series - The tractor redefined published in 2001, by John Deere / 4000 TEN Series Product Information Handbook published in 2003, by John Deere / Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere |
|---|
Speeds
| Description | With 35x12.00-16.5 rear tires. |
|---|