Home / John Deere / 4230

John Deere 4230 Specs ( 1973-1977 )

Compare Tractor

Production

Description Row-Crop tractor / Built in Waterloo, Iowa, USA / The John Deere 4230 was the Generation II replacement for the popular 4020. A row-crop tricycle front-end was an option on the 4230. Along with the smaller 4030, this was the final tractor from the Deere's Waterloo factory to have a tricycle option.
Manufacturer John Deere
Total built 33 (gasoline)

Engine

Air cleaner dry with secondary element
Bore/Stroke 4.25x4.75 inches (108 x 121 mm) / 4.25x4.25 inches (108 x 108 mm)
Compression 16.2:1
Coolant capacity 24 qts (22.7 L)
Description John Deere / diesel / 6-cylinder / liquid-cooled inline horizontal-shaft / John Deere / gasoline / 6-cylinder / liquid-cooled / The gasoline engine was only available during the 1973 model year for the Deere 4230.
Displacement 404 ci (6.6 L) / 362 ci (5.9 L)
Firing order 1-5-3-6-2-4 / 1-5-3-6-2-4
Idle RPM 800-2400
Oil capacity 17 qts (16.1 L)
Operating RPM 1500-2200
Pre-heating ether injection
Rated RPM 2200 / 2200
Starter electric / electric
Starter volts 12 / 12
Engine type John Deere 6.6L 6-cyl diesel / John Deere 5.9L 6-cyl gasoline
Engine type John Deere 6.6L 6-cyl diesel / John Deere 5.9L 6-cyl gasoline
Drawbar (tested) 83.95 hp (62.6 kW)
PTO (claimed) 100 hp (74.6 kW)
PTO (tested) 100.32 hp (74.8 kW)

Transmission

Clutch hydraulic wet disc / hydraulic wet disc / hydraulic wet discs
Description Four shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station. / Four gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range. / Optional creeper range adds additional speeds to the first five gears of the Syncro-Range transmission. An interlock prevents shifting into gears 6 through 8 while the creeper is engaged.
Gears 8 forward and 2 reverse / 16 forward and 6 reverse / 8 forward and 4 reverse / 13 forward and 4 reverse
Oil capacity 64 qts (60.6 L) / 64 qts (60.6 L) / 62 qts (58.7 L)
Transmission John Deere Syncro-Range / John Deere Quad-Range / John Deere Power Shift / Syncro-Range Creeper
Type partially synchronized / partial power shift / full power shift / creeper
Transmission type 8-speed partially synchronized / 16-speed partial power shift / 8-speed full power shift / 13-speed creeper
Transmission type 8-speed partially synchronized / 16-speed partial power shift / 8-speed full power shift / 13-speed creeper

Mechanical

Cab Open operator station. Four-post Roll-Gard ROPS optional. Sound-Gard cab with air-conditioning optional.
Description Power steering / Differential hydraulic wet disc brakes
Differential lock hydro-mechanical rear
Drive 4x2 2WD
Final drives planetary

Capacity

Fuel 37 gal (140.0 L)
Hydraulic system 16 gal (60.6 L)

Hydraulics

Capacity 16 gal (60.6 L)
Type closed center
Valves 1 to 3

Hitch

Rear Type II

PTO

Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2
Battery volts 6
Charging system alternator
Ground negative

Dimensions & Tires

2WD Length 165.6 inches (420 cm)
4WD Length 169.3 inches (430 cm)
Front tread 48 to 79 inches (121 to 200 cm) / 52 to 86 inches (132 to 218 cm) / 58 to 96 inches (147 to 243 cm)
Rack-and-pinion rear axle 3.39 by 90 inches (86 by 2286 mm) / 3.39 by 96 inches (86 by 2438 mm) / 3.39 by 104 inches (86 by 2641 mm) / 3.39 by 113 inches (86 by 2870 mm)
Rear tread 60 to 94 inches (152 to 238 cm) / 60 to 101 inches (152 to 256 cm) / 61 to 109 inches (154 to 276 cm) / 61 to 118 inches (154 to 299 cm)
Wheelbase 104 inches (264 cm)
Width 89.625 inches (227 cm)
Front tire 9.5L-15
Rear tire 18.4-34
Weight 8100 to 10800 pounds
Wheelbase 104 inches (264 cm)
Ag front 9.5L-15 / 7.5L-15
Ag rear 18.4-34 / 23.1-26

4230 Serial Number Location

Description Serial number plate on the rear of the John Deere 4230, above the PTO shaft.

4230 Serial Numbers

1973 1000
1974 13000
1975 22074
1976 28957
1977 35588
Description FAQ: How to read a serial number table.
Final 42331

John Deere 4230 Height

Cab 109.875 inches (279 cm)
Exhaust 151.75 inches (385 cm)
Steering wheel 86.7 inches (220 cm)

John Deere 4230 Weight

Ballasted 14150 lbs (6418 kg)
Operating 10800 lbs (4898 kg)
Shipping 8100 lbs (Syncro) (3674 kg)

John Deere 4230 attachments

Description front-end loader

Nebraska Tractor Test 1112

Description Diesel Quad-Range 2WDOctober 13 - 24, 1972Link: Nebraska Tractor Test 1112 file / PTO performance / Drawbar performance
Fuel use 7.1 gal/hour (26.9 l/hour) / 7.0 gal/hour (26.5 l/hour)
Max power 83.95 hp (62.6 kW)
Max pull 11,150 lbs (5057 kg)
Power at rated engine speed 100.32 hp (74.8 kW)

References

Description 4230-4430-4630 published in 1974, by John Deere / Tractors 80 to 150 hp published in 1975, by John Deere / Making you next tractor a John Deere has traditionally been a good investment published in 1975 / Product Information Manual published in 1975, by John Deere

Speeds

Description With 18.4-38 rear tires. / With 18.4-38 rear tires.

Variants

4230 row-crop
4230 Hi-Crop high clearance
4230 LP low-profile