Home / John Deere / 4310

John Deere 4310 Specs ( 2002-2004 )

Compare Tractor

Production

Description Compact Utility tractor / Built in Augusta, Georgia, USA
Manufacturer John Deere

Engine

Engine type Yanmar 1.5L 3-cyl diesel
Air cleaner dry
Compression 18.5:1
Coolant capacity 6 qts (5.7 L)
Description Yanmar 3TNE84 / diesel / 3-cylinder / liquid-cooled
Displacement 92 ci (1.5 L)
Idle RPM 1000-2810
Oil capacity 4.5 qts (4.3 L)
Power (gross) 31.2 hp (23.3 kW)
Rated RPM 2600
Starter power 1.9 hp (1.4 kW)
Starter volts 12
Engine (gross) 31.2 hp (23.3 kW)
PTO (claimed) 27 hp (20.1 kW)

Transmission

Description Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges. / Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever.
Gears 9 forward and 3 reverse / infinite forward and reverse (3-range) / 12 forward and reverse
Oil capacity 25.2 qts (23.8 L) / 27.2 qts (25.7 L) / 25.2 qts (23.8 L)
Transmission SyncShift / eHydro / ePowrReverser
Type partially synchronized / hydrostatic / power shuttle
Description hydrostatic
Transmission type 9-speed partially synchronized / 12-speed power shuttle
Description hydrostatic
Transmission type 9-speed partially synchronized / 12-speed power shuttle

Mechanical

Description Wet disc brakes / Two-post fixed ROPS. Two-post folding ROPS optional.
Differential lock mechanical rear
Drive type Two- or four-wheel drive
Final drives spur gear
Steering power

Capacity

Front axle 4.7 qts (4.4 L)
Fuel 10 gal (37.9 L)
Hydraulic system 6.3 gal (gear) (23.8 L)

Hydraulics

Capacity 6.3 gal (gear) (23.8 L)
Pressure 2500 psi (172.4 bar)
Pump flow 8.6 gpm (32.6 lpm)
Steering flow 5.3 gpm (20.1 lpm)
Total flow 13.9 gpm (52.6 lpm)
Type open center
Valves 5

Hitch

Rear lift (at 24"/610mm) 2,200 lbs (997 kg)
Rear Type I

PTO

Clutch wet disc
Engine RPM 540@2600
Mid PTO independent OptOptional
Mid PTO Type 2100
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery CCA 500
Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

Ground clearance 13.4 inches (34 cm)
Length 117 inches (297 cm)
Wheelbase 68 inches (172 cm)
Width 50 inches (127 cm)
Front tire 5.00-15
Rear tire 11.2-24
Weight 2600 to 2900 pounds
Wheelbase 68 inches (172 cm)
Ag front 5.00-15 (2WD)
Ag rear 11.2-24

4310 Serial Number Location

Description On right side of tractor frame above the front axle.

4310 Serial Numbers

2002 130001
2003 230001
2004 330001
Description FAQ: How to read a serial number table.

John Deere 4310 Height

Hood 53.3 inches (135 cm)
ROPS 82.4 inches (fixed) (209 cm)

John Deere 4310 Weight

2WD 2600 lbs (1179 kg)
4WD 2900 lbs (1315 kg)
Max Drawbar 562 lbs (254 kg)
Max front axle 1588 lbs (720 kg)
Max rear axle 4410 lbs (2000 kg)

John Deere 4310 attachments

Description 60" mid-mount mower deck / 72" mid-mount mower deck / snowblower / blade / front-end loader / backhoe

References

Description Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 / 4000 TEN Series 18 To 48 HP published in 2001, by John Deere / The New John Deere 4000 TEN Series Tractors published in 2002 / 4000 TEN Series - The tractor redefined published in 2001, by John Deere / 4000 TEN Series - Take Command published in 2001, by John Deere / 4000 TEN Series Product Information Handbook published in 2003, by John Deere / Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere

Speeds

Description With 11.2-24 rear tires. / With 11.2-24 rear tires. / With 11.2-24 rear tires.