Home / John Deere / 4410

John Deere 4410 Specs ( 2002-2004 )

Compare Tractor

Production

Description Compact Utility tractor / Built in Augusta, Georgia, USA
Manufacturer John Deere

Engine

Engine type Yanmar 1.3L 3-cyl diesel
Air cleaner dry
Bore/Stroke 3.23x3.31 inches (82 x 84 mm)
Compression 18.5:1
Coolant capacity 6 qts (5.7 L)
Description Yanmar 3TNE88 / diesel / 3-cylinder / liquid-cooled
Displacement 81.2 ci (1.3 L)
Idle RPM 1000-2810
Oil capacity 4.5 qts (4.3 L)
Power (gross) 34.6 hp (25.8 kW)
Rated RPM 2600
Starter power 1.9 hp (1.4 kW)
Starter volts 12
Engine (gross) 34.6 hp (25.8 kW)
PTO (claimed) 30 hp (gear) (22.4 kW)

Transmission

Description Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever.
Gears 12 forward and reverse / infinite forward and reverse (3-range)
Oil capacity 25.2 qts (23.8 L) / 27.2 qts (25.7 L)
Transmission ePowrReverser / eHydro
Type power shuttle / hydrostatic
Description hydrostatic
Transmission type 12-speed power shuttle
Description hydrostatic
Transmission type 12-speed power shuttle

Mechanical

Description Wet disc brakes / Two-post fixed ROPS. Two-post folding ROPS optional.
Differential lock mechanical rear
Drive type Four-wheel drive
Final drives spur gear
Steering power

Capacity

Front axle 4.7 qts (4.4 L)
Fuel 10 gal (37.9 L)
Hydraulic system 6.3 gal (gear) (23.8 L)

Hydraulics

Capacity 6.3 gal (gear) (23.8 L)
Pressure 2500 psi (172.4 bar)
Pump flow 8.6 gpm (32.6 lpm)
Steering flow 5.3 gpm (20.1 lpm)
Total flow 13.9 gpm (52.6 lpm)
Type open center
Valves 5

Hitch

Rear lift (at 24"/610mm) 2,200 lbs (997 kg)
Rear Type I

PTO

Clutch wet disc
Engine RPM 540@2600
Mid PTO independent OptOptional
Mid PTO Type 2100
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery CCA 500
Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

Ground clearance 13.4 inches (34 cm)
Length 117 inches (297 cm)
Wheelbase 68 inches (172 cm)
Width 50 inches (127 cm)
Front tire 7.00-14
Rear tire 11.2-24
Weight 2900 lbs (1315 kg)
Wheelbase 68 inches (172 cm)
Ag front 7.00-14
Ag rear 11.2-24

4410 Serial Number Location

Description On right side of tractor frame above the front axle.

4410 Serial Numbers

2002 140001
2003 240001
2004 340001
Description FAQ: How to read a serial number table.

John Deere 4410 Height

Hood 53.3 inches (135 cm)
ROPS 82.4 inches (fixed) (209 cm)

John Deere 4410 Weight

Max Drawbar 562 lbs (254 kg)
Max front axle 1588 lbs (720 kg)
Max rear axle 4410 lbs (2000 kg)

John Deere 4410 attachments

Description 60" mid-mount mower deck / 72" mid-mount mower deck / snowblower / blade / front-end loader / backhoe

References

Description Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 / 4000 TEN Series 18 To 48 HP published in 2001, by John Deere / The New John Deere 4000 TEN Series Tractors published in 2002 / 4000 TEN Series - The tractor redefined published in 2001, by John Deere / 4000 TEN Series - Take Command published in 2001, by John Deere / 4000 TEN Series Product Information Handbook published in 2003, by John Deere / Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere

Speeds

Description With 11.2-24 rear tires. / With 11.2-24 rear tires.