John Deere 4610 Specs ( 2002-2004 )
Production
| Description | Compact Utility tractor / Built in Augusta, Georgia, USA / Original price was $25,100 in 2004 |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | Yanmar 2.0L 4-cyl diesel |
|---|---|
| Air cleaner | dry with safety element |
| Bore/Stroke | 3.307x3.543 inches (84 x 90 mm) |
| Compression | 18:1 |
| Coolant capacity | 6.8 qts (6.4 L) |
| Description | Yanmar 4TNE84 / diesel / 4-cylinder / liquid-cooled |
| Displacement | 122 ci (2.0 L) |
| Power (gross) | 42.8 hp (31.9 kW) |
| Rated RPM | 2600 |
| Starter power | 2.7 hp (2.0 kW) |
| Starter volts | 12 |
| Torque | 95 lb-ft (128.8 Nm) |
| Torque RPM | 1700 |
| Oil capacity | 5.1 qts (4.8 L) |
| Engine (gross) | 42.8 hp (31.9 kW) |
| Gear PTO (claimed) | 37 hp (27.6 kW) |
| Hydro PTO (claimed) | 33.5 hp (25.0 kW) |
Transmission
| Description | The SyncShift transmission is operated via a gear shift lever and range shift lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts, within a range, may be made on the move using the clutch. / The eHydro is operated via a three-position range shift lever plus forward and reverse pedals. The tractor must be stopped to change range. |
|---|---|
| Gears | 9 forward and 3 reverse / infinite forward and reverse / 12 forward and reverse |
| Oil capacity | 38.8 qts (36.7 L) / 36.8 qts (34.8 L) / 38.8 qts (36.7 L) |
| Transmission | SyncShift / eHydro / PowrReverser |
| Type | partially synchronized / hydrostatic / power shuttle |
| Description | hydrostatic |
| Transmission type | 9-speed partially synchronized / 12-speed power shuttle |
| Description | hydrostatic |
| Transmission type | 9-speed partially synchronized / 12-speed power shuttle |
Mechanical
| Description | Power steering / Wet disc brakes / Platform with ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Two- or four-wheel drive |
| Final drives | planetary |
Capacity
| Front axle | 5.2 qts (4.9 L) |
|---|---|
| Fuel | 12.5 gal (47.3 L) |
| Hydraulic system | 9.7 gal (36.7 L) |
Hydraulics
| Capacity | 9.7 gal (36.7 L) |
|---|---|
| Pressure | 2500 psi (172.4 bar) |
| Pump flow | 10.6 gpm (40.1 lpm) |
| Steering flow | 5.3 gpm (20.1 lpm) |
| Total flow | 15.9 gpm (60.2 lpm) |
| Type | open center |
Hitch
| Rear lift | 2500 lbs (1134 kg) |
|---|---|
| Rear Type | I |
PTO
| Clutch | wet disc |
|---|---|
| Engine RPM | 540@2600 |
| Mid PTO | independent OptOptional |
| Mid PTO Type | 2100 |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 690 |
|---|---|
| Battery volts | 12 |
| Charging amps | 40 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Length | 135 inches (342 cm) |
|---|---|
| Shipping weight | 3450 lbs (1564 kg) |
| Wheelbase | 71.5 inches (181 cm) |
| Width | 62 inches*Minimum (157 cm) |
| Front tire | 6.00-16 |
| Weight | 3450 lbs (1564 kg) |
| Wheelbase | 71.5 inches (181 cm) |
| Ag front | 6.00-16 (2WD) |
| Industrial front | 10.00-16.5 (4WD) |
| Industrial rear | 17.5L-24 |
| Lawn/turf front | 27x10.5-15 |
| Lawn/turf rear | 44x18.00-20 |
4610 Serial Number Location
| Description | Serial number plate on the right side of the tractor frame, above the front axle. |
|---|
4610 Serial Numbers
| 2002 | 150001 |
|---|---|
| 2003 | 250001 |
| 2004 | 350001 |
| Description | FAQ: How to read a serial number table. |
John Deere 4610 Height
| Hood | 51 inches (129 cm) |
|---|---|
| ROPS | 91.6 inches (232 cm) |
John Deere 4610 attachments
| Description | 72" mid-mount mower deck / blade / front-end loader / backhoe |
|---|
References
| Description | 4000 TEN Series 18 To 48 HP published in 2001, by John Deere / 4000 TEN Series Product Information Handbook published in 2003, by John Deere |
|---|
Speeds
| Description | With 13.6-28 rear tires. / With 13.6-28 rear tires. / With 13.6-28 rear tires. |
|---|