John Deere 4760 Specs ( 1992-1994 )
Production
| Description | Row-Crop tractor / Built in Waterloo, Iowa, USA |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | John Deere 7.6L 6-cyl diesel |
|---|---|
| Air cleaner | dual dry element |
| Bore/Stroke | 4.5625x4.75 inches (116 x 121 mm) |
| Compression | 15.5:1 |
| Coolant capacity | 32 qts (30.3 L) |
| Description | John Deere / turbocharged aftercooled diesel / 6-cylinder / liquid-cooled inline valve-in-head |
| Displacement | 466 ci (7.6 L) |
| Firing order | 1-5-3-6-2-4 |
| Oil capacity | 22 qts (20.8 L) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Drawbar (tested) | 156.97 hp (117.1 kW) |
| PTO (claimed) | 175 hp (130.5 kW) |
| PTO (tested) | 180.35 hp (134.5 kW) |
Transmission
| Clutch | Perma-Clutch hydraulic wet disc |
|---|---|
| Description | Four gears (1-4) in four ranges (A-D) with high-low power shift. |
| Gears | 16 forward and 6 reverse / 15 forward and 4 reverse |
| Transmission | John Deere Quad Range / John Deere Power Shift |
| Type | partial power shift / full power shift |
| Transmission type | 16-speed partial power shift / 15-speed full power shift |
| Transmission type | 16-speed partial power shift / 15-speed full power shift |
Mechanical
| Description | Power steering / Differential hydraulic wet disc brakes / Sound-Gard cab standard. |
|---|---|
| Drive type | Two- or four-wheel drive |
| Final drives | inboard planetary |
Capacity
| Fuel | 102 gal (386.1 L) |
|---|---|
| Hydraulic system | 19.8 gal (74.9 L) |
Hydraulics
| Capacity | 19.8 gal (74.9 L) |
|---|---|
| Pressure | 2530 psi (174.4 bar) |
| Pump flow | 35.2 gpm (Quad Range) (133.2 lpm) |
| Rear valves | 3 or 4 |
| Type | closed center |
Hitch
| Control | electrohydraulic draft sensing |
|---|---|
| Rear lift | 8,283 lbs (3757 kg) |
| Rear Type | 3/3N |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000 |
Electrical
| Batteries | 2 |
|---|---|
| Battery CCA | 925 |
| Battery volts | 12 |
| Charging amps | 120 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| 2WD Wheelbase | 118.5 inches (300 cm) |
|---|---|
| 4WD Wheelbase | 117.1 inches (297 cm) |
| Description | Rack-and-pinion rear axle |
| Front axle | 2WD / Caster/Action MFWD |
| Height | 118.8 inches (301 cm) |
| Rear tread | 60 to 134 inches (152 to 340 cm) |
| Shipping weight | 18703 lbs (8483 kg) |
| Width | 118.5 inches (300 cm) |
| 2WD Wheelbase | 118.5 inches (300 cm) |
| 4WD Wheelbase | 117.1 inches (297 cm) |
| Weight | 18703 lbs (8483 kg) |
4760 Serial Numbers
| 1992 | 1001 |
|---|---|
| 1993 | 2941 |
| 1994 | 5701 |
| Description | FAQ: How to read a serial number table. |
| Location: | Rear of transmission |
John Deere 4760 attachments
| Description | front-end loader |
|---|
OCED Tractor Test 1621
| Description | Diesel Powershift 4WDApril 1 - May 1, 1989Link: OCED Tractor Test 1621 file / PTO performance / Drawbar performance / Gear 12 used for power test. / Gear 3 used for pull test. |
|---|---|
| Fuel use | 9.6 gal/hour (36.3 l/hour) / 9.7 gal/hour (36.7 l/hour) / 9.7 gal/hour (36.7 l/hour) |
| Max power | 178.96 hp (133.5 kW) / 147.76 hp (110.2 kW) |
| Max pull | 21,481 lbs (9743 kg) |
| Power at rated engine speed | 177.06 hp (132.0 kW) |
OCED Tractor Test 1630
| Description | Diesel Quad-Range 2WDSeptember 1 - October 1, 1989Link: OCED Tractor Test 1630 file / PTO performance / Drawbar performance |
|---|---|
| Fuel use | 9.6 gal/hour (36.3 l/hour) / 9.7 gal/hour (36.7 l/hour) / 9.6 gal/hour (36.3 l/hour) |
| Max power | 180.35 hp (134.5 kW) / 156.97 hp (117.1 kW) |
| Max pull | 19,898 lbs (9025 kg) |
| Power at rated engine speed | 177.11 hp (132.1 kW) |
References
| Description | Fine-Tuned Perfection published in 1992, by John Deere / 155- To 200-HP 60 Series Tractors published in 1993, by John Deere / Row-Crop Tractors Product Information Handbook published in 1992, by John Deere |
|---|
Tractor Tests
| Description | OECD 1621: diesel Powershift 4WD / OECD 1630: diesel Quad-Range 2WD |
|---|