Home / John Deere / 5103

John Deere 5103 Specs ( 2003-2008 )

Compare Tractor

Production

Description Utility tractor / Built in Pune, Maharashtra, India
Manufacturer John Deere

Engine

Engine type John Deere 2.9L 3-cyl diesel
Air cleaner dry
Bore/Stroke 4.19x4.33 inches (106 x 110 mm)
Compression 17.8:1
Coolant capacity 10 qts (9.5 L)
Coolant change 2000 h
Description John Deere 3029T / turbocharged diesel / 3-cylinder / liquid-cooled / The John Deere 5203 was naturally-aspirated until engine serial number 106597. Engines from that point on were turbocharged.
Displacement 179 ci (2.9 L)
Exhaust valve clearance 0.018 inches (0.457 mm)
Firing order 1-2-3
Idle RPM 800-2650
Intake valve clearance 0.014 inches (0.356 mm)
Operating RPM 1400-2400
Power 50 hp (37.3 kW)
Rated RPM 2400
Starter volts 12
Oil capacity 9 qts (8.5 L)
Oil change 100 h
PTO (claimed) 38 hp (28.3 kW)
PTO (tested) 46.45 hp (34.6 kW)

Transmission

Clutch dry disc / dry disc
Description Three speeds (1-3) plus reverse (R) in three ranges (A-C). Tractor must be stopped, and clutch used, before shifting speed or range. Standard on 2WD models. / The SyncShuttle (also identified as Top Shaft Synchronizer or TSS) is available on the 4WD models. Three speeds (1-3) plus reverse (R) in three ranges (A-C). Shifting speeds may be done while in motion, using the clutch. The tractor must be stopped to shift ranges.
Gears 9 forward and 3 reverse / 9 forward and 3 reverse
Oil capacity 40 qts (37.9 L) / 40 qts (37.9 L)
Transmission SyncReverser / SyncShuttle
Type partially synchronized
Transmission type 9-speed / 9-speed partially synchronized
Transmission type 9-speed / 9-speed partially synchronized

Mechanical

Description Power steering / Differential wet disc brakes / Foldable two-post ROPS.
Drive type Two- or four-wheel drive

Capacity

Front axle 5.3 qts (5.0 L)
Front hubs 0.85 qts (each) (0.8 L)
Fuel 19 gal (71.9 L)
Hydraulic system 10 gal (37.9 L)

Hydraulics

Capacity 10 gal (37.9 L)
Pressure 2800 psi (193.1 bar)
Pump flow 9.5 gpm (36.0 lpm)
Steering flow 6.8 gpm (25.7 lpm)
Total flow 16.3 gpm (61.7 lpm)
Type open center
Valves 1 to 2

Hitch

Rear lift 3591 lbs (1628 kg)
Rear Type I/II

PTO

Engine RPM 540@2400
Rear PTO independent
Rear PTO Type 540

Electrical

Battery CCA 623
Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

Clearance (front axle) 18 inches (45 cm)
Front tread 56.9 to 81.9 inches (144 to 208 cm)
Rear tread 55.8 to 71.7 inches (141 to 182 cm)
Wheelbase 80.7 inches (204 cm)
Front tire 7.5-16
Rear tire 13.6-28
Weight 4634 to 5031 pounds
Wheelbase 80.7 inches (204 cm)
2WD Ag front 7.5-16
4WD Ag front 8.3-24
Ag rear 13.6-28

5103 Serial Numbers

2003 P5103U000001
2004 P5103U001282
2005 P5103U003847
2006 P5103U011780
2007 P5103U0?????
2008 P5103U015563
Description FAQ: How to read a serial number table.
Location: On the tractor frame, front-left, above the front axle.

John Deere 5103 Weight

2WD Operating 4715 lbs (2138 kg)
2WD Shipping 4634 lbs (2101 kg)
4WD Shipping 5031 lbs (2282 kg)
Max Drawbar 1675 lbs (759 kg)
Max front axle 3300 lbs (1496 kg)
Max rear axle 6636 lbs (3010 kg)

John Deere 5103 attachments

Description front-end loader

Nebraska Tractor Test 1870

Description Turbo-diesel 9-speed 2WDMarch 9 - 30, 2006Link: Nebraska Tractor Test 1870 file / PTO performance
Fuel use 2.8 gal/hour (10.6 l/hour) / 2.9 gal/hour (11.0 l/hour)
Max power 46.45 hp (34.6 kW)
Power at rated engine speed 43.70 hp (32.6 kW)

References

Description Commercial & Consumer Equipment Purchasing Guide published in 2007, by John Deere / 5000 Series Value Selling Guide published in 2005, by John Deere / New 5003 Series Tractors published in 2008, by John Deere / Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere

Speeds

Description With 13.6x28 rear tires. / With 13.6x28 rear tires.