John Deere 6125D Specs ( 2008-Present )
Production
| Description | Utility tractor / Built in Saltillo, Mexico |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | John Deere 4.5L 4-cyl diesel |
|---|---|
| Air cleaner | dry element with pre-cleaner |
| Bore/Stroke | 4.19x5.00 inches (106 x 127 mm) |
| Compression | 17:1 |
| Coolant capacity | 17.4 qts (16.5 L) |
| Description | John Deere 4045H Power Tech / turbocharged intercooled diesel / 4-cylinder 8-valve / liquid-cooled |
| Displacement | 276 ci (4.5 L) |
| Exhaust valve clearance | 0.018 inches (0.457 mm) |
| Firing order | 1-3-4-2 |
| Idle RPM | 950-2275 |
| Intake valve clearance | 0.014 inches (0.356 mm) |
| Rated Power (gross) | 123 hp (91.7 kW) |
| Rated RPM | 2100 |
| Starter | electric |
| Starter volts | 12 |
| Oil capacity | 13 qts (12.3 L) |
| Oil change | 250 h |
| Engine (gross) | 123 hp (91.7 kW) |
| PTO (claimed) | 105 hp (78.3 kW) |
Transmission
| Clutch | dry disc / dry disc |
|---|---|
| Description | Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Tractor must be stopped, and clutch used, to shift gear or range. / Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shifts between gears, including to reverse, are synchronized using the clutch. Shifts between ranges are not synchronized, the operator must stop the tractor and use the clutch. |
| Gears | 9 forward and 3 reverse / 9 forward and 3 reverse |
| Oil capacity | 61.2 qts (57.9 L) / 61.2 qts (57.9 L) |
| Transmission | John Deere Collar Shift / John Deere Top Shaft Syncronized (TSS) |
| Type | unsynchronized gear / partially synchronzied |
| Transmission type | 9-speed unsynchronized gear / 9-speed partially synchronzied |
| Transmission type | 9-speed unsynchronized gear / 9-speed partially synchronzied |
Mechanical
| Cab | Two-post ROPS. Cab optional. |
|---|---|
| Description | Mechanical wet disc brakes |
| Drive type | Four-wheel drive |
| Steering | hydrostatic power |
Capacity
| Front axle | 6.9 qts (6.5 L) |
|---|---|
| Front hubs | 2.1 qts (each) (2.0 L) |
| Fuel | 41.7 gal (157.8 L) |
| Hydraulic system | 15.3 gal (57.9 L) |
Hydraulics
| Capacity | 15.3 gal (57.9 L) |
|---|---|
| Pressure | 2830 psi (195.1 bar) |
| Pump flow | 17.6 gpm (66.6 lpm) |
| Rear valves | 2 to 3 |
| Steering flow | 6.9 gpm (26.1 lpm) |
| Type | open center |
Hitch
| Control | mechanical lower link |
|---|---|
| Rear lift (at 24"/610mm) | 6,946 lbs (3150 kg) |
| Rear lift (at ends) | 7,649 lbs (3469 kg) |
| Rear Type | II |
PTO
| Clutch | mechanical dry disc |
|---|---|
| Engine RPM | 540@2100 |
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Battery AH | 102 |
|---|---|
| Battery CCA | 550 |
| Battery Group | 27 |
| Battery volts | 12 |
| Charging amps | 70 (ROPS) |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Height (cab) | 107.5 inches (273 cm) |
|---|---|
| Height (exhaust) | 106 inches (269 cm) |
| Length | 166 inches (421 cm) |
| Max weight | 15,210 lbs (6899 kg) |
| Rear axle | 72 inch length (flange) (1828 mm) |
| Shipping weight | 8,532 lbs (3870 kg) |
| Wheelbase | 92.5 inches (234 cm) |
| Width | 72 inches (182 cm) |
| Front tire | 14.9-24 |
| Rear tire | 23.1-30 |
| Weight | 8,532 lbs (3870 kg) |
| Wheelbase | 92.5 inches (234 cm) |
| Standard tires (ag) | Front: 14.9-24. Rear: 23.1-30 |
6125D Serial Numbers
| Location: | Right side of main tractor frame above front axle. |
|---|
John Deere 6125D attachments
| Description | front-end loader |
|---|
Speeds
| Description | With 18.4-34 rear tires. / With 18.4-34 rear tires. |
|---|