Home / John Deere / 6125M

John Deere 6125M Specs ( 2013-2015 )

Compare Tractor

Production

Description Utility tractor / Built in Mannheim, Baden-Württemberg, Germany
Manufacturer John Deere
Original price $74,324 (2014 SyncroPlus ROPS 2WD )

Engine

Engine type John Deere 4.5L 4-cyl diesel
Bore/Stroke 4.19x5.00 inches (106 x 127 mm)
Compression 16.1:1
Coolant capacity 23.3 qts (22.1 L)
Description John Deere PowerTech PVX / variable geometry turbocharger with intercooler diesel / 4-cylinder / liquid-cooled
Displacement 276 ci (4.5 L)
Emission control cooled exhaust gas recirculation
Emissions Interim Tier IV
Fuel system high pressure common rail
Maximum Power (gross) 130 hp (96.9 kW)
Oil capacity 16.9 qts (16.0 L)
Rated Power (gross) 125 hp (93.2 kW)
Rated RPM 2100
Starter electric
Starter volts 12
Torque 415 lb-ft (562.7 Nm)
Torque RPM 1600
Drawbar (tested) 98.31 hp (73.3 kW)
Engine (gross) 125 hp (93.2 kW)
Engine (max) 130 hp (96.9 kW)
PTO (claimed) 102 hp (76.1 kW)
PTO (tested) 114.88 hp (85.7 kW)

Transmission

Clutch wet disc / wet disc / wet disc / wet disc
Gears 12 forward and 4 reverse / 16 forward and reverse / 24 forward and reverse / 24 forward and reverse
Oil capacity 55 qts (52.1 L) / 55 qts (52.1 L) / 55 qts (52.1 L)
Transmission SyncroPlus / PowrQuad / PowrQuad Plus / AutoQuad Plus
Type fully synchronized / partial power shift / partial power shift / partial power shift
Transmission type 12-speed fully synchronized / 16-speed partial power shift / 24-speed partial power shift
Transmission type 12-speed fully synchronized / 16-speed partial power shift / 24-speed partial power shift

Mechanical

Cab Two-post foldable ROPS. Cab optional with air-conditioning. GreenStar (optional); AutoTrac (optional)
Description Hydraulic wet disc brakes
Differential lock Electro-hydraulic rear
Drive type Two- or four-wheel drive
Steering hydrostatic power

Capacity

Fuel 58 gal (219.5 L)
Hydraulic system 13.7 gal (51.9 L)

Hydraulics

Capacity 13.7 gal (51.9 L)
Mid valves 2 or 3 (optional)
Pressure 2900 psi (200.0 bar)
Pump flow 21.1 gpm (79.9 lpm)
Rear valves 1 to 3
SCV flow 21.1 gpm (79.9 lpm)
Type open center pressure compensated

Hitch

Control electrohydraulic load sensing
Drawbar Cat. II
Rear lift (at 24"/610mm) 5154 lbs (2337 kg)
Rear Type II/IIIN

PTO

Engine RPM 540@1932
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Battery volts 12
Charging amps 90
Charging system alternator
Charging volts 14
Ground negative

Dimensions & Tires

Bar rear axle 3.1 by 100.6 inches (78 by 2555 mm)
Clearance (front axle) 20.47 inches (4WD) (51 cm)
Description Flange rear axle
Front tread 60.4 to 80.4 inches (2WD) (153 to 204 cm)
Max weight 19180 lbs (8700 kg)
Weight 11519 lbs (5225 kg)
Wheelbase 101.6 inches (258 cm)
Front tire 10.00-16
Rear tire 460/85R34 (2WD)
Weight 11519 lbs (5225 kg)
Wheelbase 101.6 inches (258 cm)
Standard tires (ag) Front: 10.00-16. Rear: 460/85R34 (2WD)

6125M Serial Number Location

Description Serial number plate on the right side of the tractor frame, above the front axle.

John Deere 6125M attachments

Description front-end loader

OCED Tractor Test 2078

Description Diesel 24-speed PowrQuad Plus 4WDOctober 22 - 30, 2013Link: OCED Tractor Test 2078 file / PTO performance / Drawbar performance
Fuel use 6.7 gal/hour (25.4 l/hour) / 6.7 gal/hour (25.4 l/hour) / 6.9 gal/hour (26.1 l/hour) / 6.7 gal/hour (25.4 l/hour)
Max power 114.88 hp (85.7 kW) / 98.31 hp (73.3 kW)
Max pull 10828 lbs (4911 kg)
Power at rated engine speed 105.13 hp (78.4 kW)
Power at rated PTO speed 114.39 hp (85.3 kW)

References

Description 6M Series Tractors published in 2013, by John Deere / Specialty Tractors published in 2014, by John Deere