John Deere 7130 Specs ( 2007-2011 )
Production
| Cab | The basic Deere 7130 was available a basic cab or open-operator station with ROPS. Upgraded hydraulics and hitch were optional on open-operator station models. Upgraded systems with a cab were only available on the 7130 Premium. |
|---|---|
| Description | Row-Crop tractor / Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
Engine
| Air cleaner | dual paper elements / dual paper elements |
|---|---|
| Bore/Stroke | 4.19x5.00 inches (106 x 127 mm) / 4.19x5.00 inches (106 x 127 mm) |
| Compression | 19:1 |
| Description | John Deere 6068HL280 / turbocharged diesel / 6-cylinder 12-valve / liquid-cooled / John Deere PowerTech E 4045HL288 / turbocharged diesel / 4-cylinder 8-valve / liquid-cooled / The Deere 7130 switched to a four-cylinder engine with the 2010 model year. |
| Displacement | 414.4 ci (6.8 L) / 276 ci (4.5 L) |
| Emissions | Tier III / Tier III |
| Exhaust valve clearance | 0.018 inches (0.457 mm) / 0.018 inches (0.457 mm) |
| Firing order | 1-5-3-6-2-4 / 1-3-4-2 |
| Fuel system | high-pressure common rail |
| Idle RPM | 850-2460 / 850-2460 |
| Intake valve clearance | 0.014 inches (0.356 mm) / 0.014 inches (0.356 mm) |
| Oil capacity | 20.8 qts (19.7 L) / 16.8 qts (15.9 L) |
| Operating RPM | 1600-2300 / 1600-2300 |
| Rated Power (gross) | 121 hp (90.2 kW) / 125 hp (93.2 kW) |
| Rated RPM | 2300 / 2300 |
| Starter power | 4 hp (3.0 kW) / 4 hp (3.0 kW) |
| Starter volts | 12 / 12 |
| Torque | 358 lb-ft (485.4 Nm) / 372 lb-ft (504.4 Nm) |
| Torque RPM | 1500 / 1600 |
| Engine type | John Deere 6.8L 6-cyl diesel / John Deere 4.5L 4-cyl diesel |
| Engine type | John Deere 6.8L 6-cyl diesel / John Deere 4.5L 4-cyl diesel |
| Engine (gross) | 125 hp (93.2 kW) |
| PTO (claimed) | 100 hp (74.6 kW) |
Transmission
| Description | Four ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Cluch must be used to change range or gear. Only avaialable with ROPS. / Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range or gear. / Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. / Six ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. |
|---|---|
| Gears | 12 forward and 4 reverse / 16 forward and reverse / 16 forward and reverse / 24 forward and reverse |
| Oil capacity | 54.8 qts (51.9 L) / 54.8 qts (51.9 L) / 54.8 qts (51.9 L) / 54.8 qts (51.9 L) |
| Transmission | John Deere SyncroPlus / John Deere SyncroPlus PowrReverser / John Deere PowrQuad / John Deere PowrQuad |
| Type | full synchro shift / full synchro shift / partial power shift / partial power shift |
| Transmission type | 12-speed full synchro shift / 16-speed full synchro shift / 16-speed partial power shift / 24-speed partial power shift |
| Transmission type | 12-speed full synchro shift / 16-speed full synchro shift / 16-speed partial power shift / 24-speed partial power shift |
Mechanical
| Cab | Two-post Roll-Gard ROPS. Cab optional. |
|---|---|
| Description | Differential hydraulic wet disc brakes |
| Drive | 4x2 2WD |
| Steering | hydrostatic power |
Capacity
| Front axle | 8.8 qts (8.3 L) |
|---|---|
| Front hubs | 1.6 qts (1.5 L) |
| Fuel | 54.7 gal (207.0 L) |
| Hydraulic system | 13.7 gal (51.9 L) |
Hydraulics
| Capacity | 13.7 gal (51.9 L) |
|---|---|
| Pressure | 2900 psi (200.0 bar) |
| Pump flow | 21.1 gpm (79.9 lpm) |
| Type | constant flow load sensing |
| Valves | 1 to 4 |
Hitch
| Control | position control |
|---|---|
| Rear lift (at 24"/610mm) | 5,915 lbs (2683 kg) |
| Rear Type | II |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540/1000 |
Electrical
| Battery volts | 12 |
|---|---|
| Charging amps | 90 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (drawbar) | 19 inches (48 cm) |
|---|---|
| Clearance (front axle) | 21.6 inches (2WD) (54 cm) |
| Clearance (rear axle) | 28.2 inches (71 cm) |
| Front tread | 59.5 to 85.5 inches (2WD) (151 to 217 cm) / 59.4 to 88 inches (4WD) (150 to 223 cm) |
| Length | 187.3 inches (475 cm) |
| Rear axle | 65.5 inch length (flange) (1663 mm) / 3.1 by 100.6 inches (optional bar) (78 by 2555 mm) |
| Rear tread | 63.5 to 72.5 inches (161 to 184 cm) |
| Wheelbase | 106.3 inches (2WD) (270 cm) |
| Width | 65.5 inches (flange axle ends) (166 cm) |
| Front tire | 10.00-16 |
| Rear tire | 18.4R38 (2WD) |
| Weight | 9657 to 12340 pounds |
| Wheelbase | 106.3 inches (2WD) (270 cm) |
| Standard tires (ag) | Front: 10.00-16. Rear: 18.4R38 (2WD) |
7130 Serial Number Location
| Description | Right side of main frame above front axle |
|---|
John Deere 7130 Height
| Cab | 114.4 inches (290 cm) |
|---|---|
| ROPS | 115.2 inches (292 cm) |
John Deere 7130 Weight
| Max capacity | 18,740 lbs (8500 kg) |
|---|---|
| Max Drawbar | 4,960 lbs (2249 kg) |
| Max front axle | 4,520 lbs (2WD) (2050 kg) |
| Max rear axle | 14,330 lbs (6500 kg) |
| Operating | 12,340 lbs (5597 kg) |
| Shipping | 9,657 lbs (2WD) (4380 kg) |
References
| Description | 6030 and 7030 Series Tractors published in 2007, by John Deere |
|---|
Speeds
| Description | With 18.4R38 rear tires. / With 18.4R38 rear tires. / With 18.4R38 rear tires. / With 18.4R38 rear tires. Reverse speeds are approximately 5% faster than listed forward speeds. |
|---|
Variants
| 7130 | base tractor |
|---|---|
| 7130 Premium | deluxe tractor |