John Deere 8130 Specs ( 2006-2009 )
Production
| Description | Row-Crop tractor / Built in Waterloo, Iowa, USA |
|---|---|
| Manufacturer | John Deere |
Engine
| Engine type | John Deere 9.0L 6-cyl diesel |
|---|---|
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.661x5.354 inches (118 x 136 mm) |
| Compression | 16.3:1 |
| Coolant capacity | 42.3 qts (40.0 L) |
| Description | John Deere PowerTech / variable geometry turbocharged diesel / 6-cylinder 24-valve / liquid-cooled inline |
| Displacement | 548 ci (9.0 L) |
| Idle RPM | 900-2200 |
| Maximum Power (gross) | 240 hp (179.0 kW) |
| Oil capacity | 25.5 qts (24.1 L) |
| Operating RPM | 1500-2100 |
| Rated Power (gross) | 225 hp (167.8 kW) |
| Rated RPM | 2100 |
| Starter volts | 12 |
| Drawbar (tested) | 158.05 hp (117.9 kW) |
| Engine (gross) | 225 hp (167.8 kW) |
| Engine (max) | 240 hp (179.0 kW) |
| PTO (claimed) | 180 hp (134.2 kW) |
| PTO (tested) | 208.27 hp (155.3 kW) |
Transmission
| Clutch | hydraulic wet disc |
|---|---|
| Description | Full power shift transmission operated with right-hand control lever. Transmission defaults to gear 7-forward and 2-reverse on startup, although this may be re-programmed. Automatic PowerShift (APS) enables automatic shifting to maintain engine load. / IVT available with 40 or 50 kph (25 or 31 mph) maximum speed. With maximum speed set to less than 2 kph the transmission automatically enters creeper mode. |
| Gears | 16 forward and 4 reverse / infinite forward and reverse |
| Oil capacity | 160 qts (151.4 L) |
| Transmission | John Deere PowerShift / John Deere Infinitely Variable Transmission (IVT) |
| Transmission type | 16-speed full power shift |
| Type | full power shift |
Mechanical
| Description | Power steering / Wet disc brakes / CommandView cab standard. |
|---|---|
| Drive | 4x2 2WD |
Capacity
| Fuel | 180 gal (681.3 L) |
|---|---|
| Hydraulic system | 9.5 gal (36.0 L) |
Hydraulics
| Capacity | 9.5 gal (36.0 L) |
|---|---|
| Pressure | 2098 psi (144.7 bar) |
| Pump flow | 31.7 gpm (120.0 lpm) |
| Total flow | 44 gpm (166.5 lpm) |
| Type | closed center PFC |
| Valves | 3 to 5 |
Hitch
| Rear lift (at 24"/610mm) | 12400 lbs (5624 kg) |
|---|---|
| Rear Type | III/IIIN |
PTO
| Engine RPM | 540@1817 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 1000 |
Electrical
| Batteries | 2 |
|---|---|
| Battery CCA | 925 |
| Battery volts | 12 |
| Charging amps | 200 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ground clearance | 17.4 inches (44 cm) |
|---|---|
| Height | 122.9 inches (312 cm) |
| Length | 219.1 inches (556 cm) |
| Weight | 21774 lbs (2WD) (9876 kg) |
| Wheelbase | 118.9 inches (ILS) (302 cm) |
| Front tire | 11.00-24 |
| Rear tire | 480/80R46 |
| Weight | 21774 to 25147 pounds |
| Wheelbase | 118.9 inches (ILS) (302 cm) |
| Ag front | 11.00-24 (2WD) |
| Ag rear | 480/80R46 |
OCED Tractor Test 1884
| Description | Diesel PowerShift 4WDSeptember 19 - October 5, 2006Link: OCED Tractor Test 1884 file / PTO performance / Drawbar performance / Gear 8 used for power test. / Gear 5 used for pull test. |
|---|---|
| Fuel use | 11.3 gal/hour (42.8 l/hour) / 10.3 gal/hour (39.0 l/hour) / 10.8 gal/hour (40.9 l/hour) / 10.3 gal/hour (39.0 l/hour) |
| Max power | 208.27 hp (155.3 kW) / 158.05 hp (117.9 kW) |
| Max pull | 18935 lbs (8588 kg) |
| Power at rated engine speed | 182.22 hp (135.9 kW) |
| Power at rated PTO speed | 197.60 hp (147.4 kW) |
References
| Description | 8030 Series 2007 Updates published by John Deere |
|---|