Home / John Deere / 9100

John Deere 9100 Specs ( 1997-2001 )

Compare Tractor

Production

Description Built in Waterloo, Iowa, USA
Drive type Four-wheel Drive (4WD) tractor
Manufacturer John Deere

Engine

Engine type John Deere 8.1L 6-cyl diesel
Bore/Stroke 4.56x5.06 inches (116 x 129 mm)
Compression 16.5:1
Coolant capacity 56 qts (53.0 L)
Description John Deere / turbocharged aftercooled diesel / 6-cylinder / liquid-cooled inline
Displacement 496 ci (8.1 L)
Power 260 hp (193.9 kW)
Rated RPM 2100
Oil capacity 32 qts (30.3 L)
Drawbar (tested) 199.67 hp (148.9 kW)
PTO (claimed) 214 hp (159.6 kW)
PTO (tested) 249.38 hp (186.0 kW)

Transmission

Description Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range. / Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever.
Gears 12 forward and 3 reverse / 24 forward and 6 reverse / 12 forward and 2 reverse
Oil capacity 147.2 qts (100mm axle) (139.3 L) / 147.2 qts (100mm axle) (139.3 L) / 64 qts (early) (60.6 L)
Transmission John Deere Syncro / John Deere PowrSync / John Deere PowerShift
Type partially synchronized / partial power shift / full power shift
Transmission type 12-speed partially synchronized / 24-speed partial power shift / 12-speed full power shift
Transmission type 12-speed partially synchronized / 24-speed partial power shift / 12-speed full power shift

Mechanical

Cab Cab standard.
Description Hydraulic wet disc brakes
Drive type Four-wheel drive
Final drives inboard planetary
Steering hydrostatic power

Capacity

Fuel 270 gal (1022.0 L)
Hydraulic system 26 gal (98.4 L)

Hydraulics

Capacity 26 gal (98.4 L)
Pressure 2900 psi (200.0 bar)
Pump flow 35 gpm (132.5 lpm)
Total flow 44 gpm (166.5 lpm)
Type closed center PFC
Valves 3 to 5

Hitch

Rear lift 13,871 lbs (6291 kg)
Rear Type III

PTO

Rear PTO independent
Rear PTO Type 1000 (optional)

Electrical

Batteries 2
Battery CCA 925
Battery volts 12
Charging amps 140
Charging system alternator
Ground negative

Dimensions & Tires

Front axle 3.94 by 120 inches (100 by 3048 mm)
Ground clearance 28.8 inches (axles) (73 cm)
Height (cab) 137.5 inches (349 cm)
Length 274 inches (695 cm)
Rear axle 3.94 by 120 inches (100 by 3048 mm)
Shipping weight 28,380 lbs (12873 kg)
Wheelbase 137.8 inches (350 cm)
Width 158 inches (duals) (401 cm)
Front tire 20.8R38
Rear tire 20.8R38
Weight 28,380 lbs (12873 kg)
Wheelbase 137.8 inches (350 cm)
Ag front 20.8R38
Ag rear 20.8R38

9100 Serial Number Location

Description Serial number plate on the top-left of the tractor's hinge

9100 Serial Numbers

1997 1001
1998 10001
1999 20001
2000 30001
2001 40001
Description FAQ: How to read a serial number table.

OCED Tractor Test 1730

Description Diesel 24-speed 4WDApril 21 - May 1, 1997Link: OCED Tractor Test 1730 file / PTO performance / Drawbar performance
Fuel use 13.2 gal/hour (50.0 l/hour) / 12.7 gal/hour (48.1 l/hour) / 13.3 gal/hour (50.3 l/hour) / 12.5 gal/hour (47.3 l/hour)
Max power 249.38 hp (186.0 kW) / 199.67 hp (148.9 kW)
Max pull 33933 lbs (15392 kg)
Power at rated engine speed 219.61 hp (163.8 kW)
Power at rated PTO speed 248.23 hp (185.1 kW)

References

Description New 9000 Series Tractors published in 1996, by John Deere / Typical Questions & Answers - 9000 Series 4WD Tractor Engines published in 1996, by John Deere / The New World Power - 9000 Series Tractors published in 1996, by John Deere / 9000 Series Tractors Product Information Handbook published in 1998, by John Deere / 9000/9000T Series Tractors Product Information Handbook published in 1999, by John Deere

Speeds

Description With 20.8R38 tires. / With 20.8R38 tires. / With 20.8R38 tires.